| 31-18 |
RESERVED |
R |
0x0 |
|
| 17 |
R17 |
R |
0x0 |
GPIO Port T Peripheral Ready
0x0 = GPIO port T is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port T is ready for access.
|
| 16 |
R16 |
R |
0x0 |
GPIO Port S Peripheral Ready
0x0 = GPIO port S is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port S is ready for access.
|
| 15 |
R15 |
R |
0x0 |
GPIO Port R Peripheral Ready
0x0 = GPIO port R is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port R is ready for access.
|
| 14 |
R14 |
R |
0x0 |
GPIO Port Q Peripheral Ready
0x0 = GPIO port Q is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port Q is ready for access.
|
| 13 |
R13 |
R |
0x0 |
GPIO Port P Peripheral Ready
0x0 = GPIO port P is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port P is ready for access.
|
| 12 |
R12 |
R |
0x0 |
GPIO Port N Peripheral Ready
0x0 = GPIO port N is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port N is ready for access.
|
| 11 |
R11 |
R |
0x0 |
GPIO Port M Peripheral Ready
0x0 = GPIO port M is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port M is ready for access.
|
| 10 |
R10 |
R |
0x0 |
GPIO Port L Peripheral Ready
0x0 = GPIO port L is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port L is ready for access.
|
| 9 |
R9 |
R |
0x0 |
GPIO Port K Peripheral Ready
0x0 = GPIO port K is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port K is ready for access.
|
| 8 |
R8 |
R |
0x0 |
GPIO Port J Peripheral Ready
0x0 = GPIO port J is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port J is ready for access.
|
| 7 |
R7 |
R |
0x0 |
GPIO Port H Peripheral Ready
0x0 = GPIO port H is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port H is ready for access.
|
| 6 |
R6 |
R |
0x0 |
GPIO Port G Peripheral Ready
0x0 = GPIO port G is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port G is ready for access.
|
| 5 |
R5 |
R |
0x0 |
GPIO Port F Peripheral Ready
0x0 = GPIO port F is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port F is ready for access.
|
| 4 |
R4 |
R |
0x0 |
GPIO Port E Peripheral Ready
0x0 = GPIO port E is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port E is ready for access.
|
| 3 |
R3 |
R |
0x0 |
GPIO Port D Peripheral Ready
0x0 = GPIO port D is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port D is ready for access.
|
| 2 |
R2 |
R |
0x0 |
GPIO Port C Peripheral Ready
0x0 = GPIO port C is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port C is ready for access.
|
| 1 |
R1 |
R |
0x0 |
GPIO Port B Peripheral Ready
0x0 = GPIO port B is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port B is ready for access.
|
| 0 |
R0 |
R |
0x0 |
GPIO Port A Peripheral Ready
0x0 = GPIO port A is not ready for access. It is unclocked, unpowered, or in the process of completing a reset sequence.
0x1 = GPIO port A is ready for access.
|