| 31-14 |
RESERVED |
R |
0x0 |
|
| 13 |
PROGMASK |
R/W |
0x0 |
Program Verify Error Interrupt Mask
0x0 = The PROGRIS interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the PROGRIS bit is set.
|
| 12 |
RESERVED |
R |
0x0 |
|
| 11 |
ERMASK |
R/W |
0x0 |
Erase Verify Error Interrupt Mask
0x0 = The ERRIS interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the ERRIS bit is set.
|
| 10 |
INVDMASK |
R/W |
0x0 |
Invalid Data Interrupt Mask
0x0 = The INVDRIS interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the INVDRIS bit is set.
|
| 9 |
VOLTMASK |
R/W |
0x0 |
Pump Voltage Interrupt Mask
0x0 = The VOLTRIS interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the VOLTRIS bit is set.
|
| 8-3 |
RESERVED |
R |
0x0 |
|
| 2 |
EMASK |
R/W |
0x0 |
EEPROM Interrupt Mask
0x0 = The ERIS interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the ERIS bit is set.
|
| 1 |
PMASK |
R/W |
0x0 |
Programming Interrupt Mask
This bit controls the reporting of the programming raw interrupt status to the interrupt controller.
0x0 = The PRIS interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the PRIS bit is set.
|
| 0 |
AMASK |
R/W |
0x0 |
Access Interrupt Mask
This bit controls the reporting of the access raw interrupt status to the interrupt controller.
0x0 = The ARIS interrupt is suppressed and not sent to the interrupt controller.
0x1 = An interrupt is sent to the interrupt controller when the ARIS bit is set.
|