12.5.6 ACCTLn Register [reset = 0x0]
Analog Comparator Control 0 (ACCTL0), offset 0x024
Analog Comparator Control 1 (ACCTL1), offset 0x044
Analog Comparator Control 2 (ACCTL2), offset 0x064
These registers configure the comparator's input and output.
ACCTLn is shown in Figure 12-9 and described in Table 12-11.
Return to Summary Table.
Figure 12-9 ACCTLn Register
| 31 |
30 |
29 |
28 |
27 |
26 |
25 |
24 |
| RESERVED |
| R-0x0 |
|
| 23 |
22 |
21 |
20 |
19 |
18 |
17 |
16 |
| RESERVED |
| R-0x0 |
|
| 15 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
| RESERVED |
TOEN |
ASRCP |
RESERVED |
| R-0x0 |
R/W-0x0 |
R/W-0x0 |
R-0x0 |
|
| 7 |
6 |
5 |
4 |
3 |
2 |
1 |
0 |
| TSLVAL |
TSEN |
ISLVAL |
ISEN |
CINV |
RESERVED |
| R/W-0x0 |
R/W-0x0 |
R/W-0x0 |
R/W-0x0 |
R/W-0x0 |
R-0x0 |
|
Table 12-11 ACCTLn Register Field Descriptions
| Bit |
Field |
Type |
Reset |
Description |
| 31:12 |
RESERVED |
R |
0x0 |
|
| 11 |
TOEN |
R/W |
0x0 |
Trigger Output Enable.
|
| 10:9 |
ASRCP |
R/W |
0x0 |
Analog Source Positive.
The ASRCP field specifies the source of input voltage to the VIN+ terminal of the comparator.
The encodings for this field are as follows: |
| 8 |
RESERVED |
R |
0x0 |
|
| 7 |
TSLVAL |
R/W |
0x0 |
Trigger Sense Level Value.
|
| 6:5 |
TSEN |
R/W |
0x0 |
Trigger Sense.
The TSEN field specifies the sense of the comparator output that generates an ADC event. |
| 4 |
ISLVAL |
R/W |
0x0 |
Interrupt Sense Level Value.
|
| 3:2 |
ISEN |
R/W |
0x0 |
Interrupt Sense.
The ISEN field specifies the sense of the comparator output that generates an interrupt. |
| 1 |
CINV |
R/W |
0x0 |
Comparator Output Invert.
|
| 0 |
RESERVED |
R |
0x0 |
|