SPRUJ42 User guide | 德州仪器 TI.com.cn

SPRUJ42E March 2022 – October 2024 AM2631 , AM2631-Q1 , AM2632 , AM2632-Q1 , AM2634 , AM2634-Q1

PRODUCTION DATA

5.22.2.27 RTI_RTIINTFLAG Register

22.2.27.1 RTI_RTIINTFLAG Register (Offset = 88h) [reset = 0h]

Interrupt Flags interrupt pending bits.

Table 5-2234 Instance Table

Instance Name	Physical Address
RTI0	5218 0088h
RTI1	5218 1088h
RTI2	5218 2088h
RTI3	5218 3088h

Figure 5-1099 RTI_RTIINTFLAG Name Register

31	30	29	28	27	26	25	24
RESERVED16
R/W
0h
23	22	21	20	19	18	17	16
RESERVED16					OVL1INT	OVL0INT	TBINT
R/W					R/W	R/W	R/W
0h					0h	0h	0h
15	14	13	12	11	10	9	8
RESERVED15
R/W
0h
7	6	5	4	3	2	1	0
RESERVED15				INT3	INT2	INT1	INT0
R/W				R/W	R/W	R/W	R/W
0h				0h	0h	0h	0h

Table 5-2235 RTI_RTIINTFLAG Register Field Descriptions

Bit	Field	Type	Reset	Description
31:19	RESERVED16	R/W	0h	Reserved. Reads return 0 and writes have no effect
18	OVL1INT	R/W	0h	OVL1INT: Free Running Counter 1 Overflow Interrupt Flag. User and privilege mode [read]: determines if an interrupt is pending 0 = no interrupt pending 1 = interrupt pending Privilege mode [write]: 0 = leaves the bit unchanged 1 = set the bit to 0
17	OVL0INT	R/W	0h	OVL0INT: Free Running Counter 0 Overflow Interrupt Flag. User and privilege mode [read]: determines if an interrupt is pending 0 = no interrupt pending 1 = interrupt pending Privilege mode [write]: 0 = leaves the bit unchanged 1 = set the bit to 0
16	TBINT	R/W	0h	User and privilege mode [read]: this flag is set when the TBEXT bit is cleared by detection of a missing external clockedge. It will not be set by clearing TBEXT by software. determines if an interrupt is pending 0 = no interrupt pending 1 = interrupt pending Privilege mode [write]: 0 = leaves the bit unchanged 1 = set the bit to 0
15:4	RESERVED15	R/W	0h	Reserved. Reads return 0 and writes have no effect
3	INT3	R/W	0h	INT3: Interrupt Flag 3. User and privilege mode [read]: determines if a interrupt is pending 0 = no interrupt pending 1 = interrupt pending Privilege mode [write]: 0 = leaves the bit unchanged 1 = set the bit to 0
2	INT2	R/W	0h	INT2: Interrupt Flag 2. User and privilege mode [read]: determines if a interrupt is pending 0 = no interrupt pending 1 = interrupt pending Privilege mode [write]: 0 = leaves the bit unchanged 1 = set the bit to 0
1	INT1	R/W	0h	INT1: Interrupt Flag 1. User and privilege mode [read]: determines if a interrupt is pending 0 = no interrupt pending 1 = interrupt pending Privilege mode [write]: 0 = leaves the bit unchanged 1 = set the bit to 0
0	INT0	R/W	0h	INT0: Interrupt Flag 0. User and privilege mode [read]: determines if a interrupt is pending 0 = no interrupt pending 1 = interrupt pending Privilege mode [write]: 0 = leaves the bit unchanged 1 = set the bit to 0