首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS130E08

現行

適用計量應用的低成本、8 通道、整合式類比前端

立即訂購
產品規格表

ADS130E08

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 16 Sample rate (max) (ksps) 8 Number of input channels 8 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 4 Input voltage range (min) (V) 0 Features Daisy-Chainable, GPIO, Oscillator, PGA Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 6 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.25 SNR (dB) 89 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
Resolution (Bits) 16 Sample rate (max) (ksps) 8 Number of input channels 8 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 4 Input voltage range (min) (V) 0 Features Daisy-Chainable, GPIO, Oscillator, PGA Operating temperature range (°C) -40 to 105 Power consumption (typ) (mW) 6 Analog supply voltage (min) (V) 2.7 Analog supply voltage (max) (V) 5.25 SNR (dB) 89 Digital supply (min) (V) 1.7 Digital supply (max) (V) 3.6
TQFP (PAG) 64 144 mm² (12 mm × 12 mm)
  • Eight Differential Current and Voltage Inputs
  • Eight Low-Noise PGAs and
    Eight High-Resolution ADCs
  • Exceeds Class 1.0 Performance
  • CMRR: –110 dB
  • Crosstalk: –105 dB
  • THD: –108 dB
  • Power: 750 µW/Channel
  • Data Rates: 8 kSPS
  • Programmable Gains (1, 2, and 8)
  • DC Coupling:
    • Dual Supplies: +3 V to +5 V or
      +1.8 V to +3.6 V
    • Bipolar Supply: ±2.5 V
  • Built-In Test Signals
  • Fault Detection Comparators
  • Four GPIO Pins
  • Internal and External Reference
  • Flexible Power-Down: STBY Mode
  • SPI™ Data Interface
  • Package: TQFP-64 (PAG)
  • Operating Temperature Range:
    –40°C to +105°C
  • Eight Differential Current and Voltage Inputs
  • Eight Low-Noise PGAs and
    Eight High-Resolution ADCs
  • Exceeds Class 1.0 Performance
  • CMRR: –110 dB
  • Crosstalk: –105 dB
  • THD: –108 dB
  • Power: 750 µW/Channel
  • Data Rates: 8 kSPS
  • Programmable Gains (1, 2, and 8)
  • DC Coupling:
    • Dual Supplies: +3 V to +5 V or
      +1.8 V to +3.6 V
    • Bipolar Supply: ±2.5 V
  • Built-In Test Signals
  • Fault Detection Comparators
  • Four GPIO Pins
  • Internal and External Reference
  • Flexible Power-Down: STBY Mode
  • SPI™ Data Interface
  • Package: TQFP-64 (PAG)
  • Operating Temperature Range:
    –40°C to +105°C

The ADS130E08 is a multi-channel, simultaneous sampling, 16-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC) with a built-in programmable gain amplifier (PGA), internal reference, and an external oscillator interface.

The device incorporates commonly-required features in industrial metering applications. With high levels of integration and exceptional performance, the ADS130E08 enables the creation of scalable industrial power systems at significantly reduced size, power, and low overall cost.

The ADS130E08 has a flexible input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and fault detection. The ADS130E08 operates at a data rate of 8 kSPS. Fault detection can be implemented internal to the device using the integrated comparators with digital-to-analog converter (DAC)-controlled trigger levels.

Multiple devices can be cascaded in high channel count systems in a daisy-chain configuration. These complete analog front-end (AFE) solutions are packaged in a TQFP-64 package and specified over the industrial temperature range of –40°C to +105°C.

The ADS130E08 is a multi-channel, simultaneous sampling, 16-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC) with a built-in programmable gain amplifier (PGA), internal reference, and an external oscillator interface.

The device incorporates commonly-required features in industrial metering applications. With high levels of integration and exceptional performance, the ADS130E08 enables the creation of scalable industrial power systems at significantly reduced size, power, and low overall cost.

The ADS130E08 has a flexible input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and fault detection. The ADS130E08 operates at a data rate of 8 kSPS. Fault detection can be implemented internal to the device using the integrated comparators with digital-to-analog converter (DAC)-controlled trigger levels.

Multiple devices can be cascaded in high channel count systems in a daisy-chain configuration. These complete analog front-end (AFE) solutions are packaged in a TQFP-64 package and specified over the industrial temperature range of –40°C to +105°C.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 Low-Cost, 8-Channel, Integrated Analog Front-End for Metering Applications datasheet (Rev. A) 2012/9/27
應用說明 A Basic Guide to Bridge Measurements (Rev. A) PDF | HTML 2024/3/13
應用說明 Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023/3/29
電子書 Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020/6/19
使用指南 ADS130E08 User's Guide (Rev. A) 2016/2/15
電子書 Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs 2015/3/19

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS130E08EVM-PDK — ADS130E08 性能展示套件

ADS130E08EVM-PDK 為 ADS130E08 的示範套件，ADS131E08 是同時取樣、16 位元、delta-sigma (ΔΣ) 類比數位轉換器 (ADC)，內建可編程增益放大器 (PGA)、內部參考和板上振盪器。ADS130E08 包含工業電源監控和控制所需的常用功能，但可彈性滿足需要八通道、16 位元 ADC 的各種應用。ADS130E08EVM-PDK 展示套件設計用於加速評估和系統開發。

 

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

ADS130E08 IBIS Model

SBAM157.ZIP (141 KB) - IBIS 模型
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TQFP (PAG) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片