ADS131A02
- 2 or 4 simultaneous-sampling differential inputs
- Data rates up to 128 kSPS
- High performance:
- Single-channel accuracy: better than 0.1% at 10,000:1 dynamic range
- Effective resolution: 20.6 bits at 8 kSPS
- THD: –100 dB at 50 Hz and 60 Hz
- Integrated negative charge pump allows absolute input voltages below ground
- Flexible analog power-supply
operation:
- Using negative charge pump: 3.0 V to 3.45 V
- Unipolar supply: 3.3 V to 5.5 V
- Bipolar supply: ±2.5 V
- Digital supply: 1.65 V to 3.6 V
- Low-drift internal voltage reference: 6 ppm/°C
- ADC self checks
- Cyclic redundancy check (CRC) and hamming code error correction on communications
- Multiple SPI data interface
modes:
- Asynchronous interrupt
- Synchronous master and slave
- Package: 32-pin TQFP
- Operating temperature range:
–40°C to +125°C
The ADS131A02 and ADS131A04 devices are two- and four-channel, simultaneous-sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs). The wide dynamic range, with scalable data rates up to 128 kSPS, and internal fault monitors make the ADS131A02 or ADS131A04 a good choice when designing for energy monitoring, grid protection, and control applications. The ADC inputs can be independently and directly interfaced to a resistor-divider network, a current transformer, or a Rogowski coil to measure voltage or current. Flexible power-supply options, including an internal negative charge pump, are available to maximize the effective resolution for high dynamic range applications.
Asynchronous and synchronous master and slave interface options are available, providing ADC configuration flexibility when chaining multiple devices in a single system. Several interface checks, ADC startup checks, and data integrity checks can be enabled on the interface to report errors in the ADC and during data transfer.
The complete analog front-end (AFE) solutions are packaged in a 32-pin TQFP package and are specified over the industrial temperature range of –40°C to +125°C.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | ADS131A0x 2- or 4-Channel, 24-Bit, 128-kSPS, Simultaneous-Sampling, Delta-Sigma ADC datasheet (Rev. E) | PDF | HTML | 2020/6/17 | ||
| 應用說明 | A Simple, Java-Based CRC Calculator | PDF | HTML | 2026/3/4 | |||
| 應用說明 | A Basic Guide to Bridge Measurements (Rev. A) | PDF | HTML | 2024/3/13 | |||
| 應用說明 | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023/3/29 | |||
| 應用說明 | Communication Methods for Data Integrity Using Delta-Sigma Data Converters (Rev. A) | PDF | HTML | 2021/8/23 | |||
| 電子書 | Fundamentals of Precision ADC Noise Analysis (Rev. A) | 2020/6/19 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS131A04EVM — ADS131A04 評估模組
ADS131A04-C-EXAMPLE-CODE — ADS131A04 example C code
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-00835 — 採用 24 位元 Delta-Sigma ADC 的高準確度 ±0.5% 電流和隔離式電壓量測參考設計
TIDA-00835 參考設計採用雙極輸入配置，結合具有四通道、24 位元同時取樣差動輸入的 ΔΣ ADC，在寬動態範圍內進行精確的電壓和電流測量。配置 ADC 來測量 ±2.5V 雙極輸入。 使用固定增益放大器，將輸入調整至 ±2.5V 的 ADC 測量範圍。此 AFE 使用通用外部時脈將兩個 ADC 串接在一起，將輸入通道數量擴充至八個，並同時取樣所有輸入通道。每個模組擁有更多測量通道，可降低整體系統成本。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TQFP (PBS) | 32 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。