INA333-Q1

現行

車用低功耗、零漂移、精密儀器放大器

立即訂購

產品規格表

document-pdfAcrobat INA333-Q1 Automotive, Zerø-Drift, micro-Power Instrumentation Amplifier datasheet (Rev. B) (英文) PDF | HTML

INA333-Q1

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

1

Vs (max) (V)

5.5

Vs (min) (V)

1.8

Input offset (±) (max) (µV)

25

Voltage gain (min) (V/V)

1

Voltage gain (max) (V/V)

1000

Noise at 1 kHz (typ) (nV√Hz)

50

Features

Low power, Zero Drift

CMRR (min) (dB)

96

Input offset drift (±) (max) (µV/°C)

0.1

Input bias current (±) (max) (nA)

0.28

Iq (typ) (mA)

0.05

Bandwidth at min gain (typ) (MHz)

0.15

Gain error (±) (max) (%)

0.25

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Type

Resistor

Gain nonlinearity (±) (max) (%)

0.001

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.05

Input common mode headroom (to negative supply) (typ) (V)

0.1

Input common mode headroom (to positive supply) (typ) (V)

-0.1

Noise at 0.1 Hz to 10 Hz (typ) (µVPP)

1

Number of channels

1

Vs (max) (V)

5.5

Vs (min) (V)

1.8

Input offset (±) (max) (µV)

25

Voltage gain (min) (V/V)

1

Voltage gain (max) (V/V)

1000

Noise at 1 kHz (typ) (nV√Hz)

50

Features

Low power, Zero Drift

CMRR (min) (dB)

96

Input offset drift (±) (max) (µV/°C)

0.1

Input bias current (±) (max) (nA)

0.28

Iq (typ) (mA)

0.05

Bandwidth at min gain (typ) (MHz)

0.15

Gain error (±) (max) (%)

0.25

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Type

Resistor

Gain nonlinearity (±) (max) (%)

0.001

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.05

Input common mode headroom (to negative supply) (typ) (V)

0.1

Input common mode headroom (to positive supply) (typ) (V)

-0.1

Noise at 0.1 Hz to 10 Hz (typ) (µVPP)

1

VSSOP (DGK)

8

14.7 mm² (3 mm × 4.9 mm)

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C ≤ T A ≤ +125°C
Functional Safety-Capable
- Documentation available to aid functional safety system design
Low offset voltage: 25 µV (maximum), G ≥ 100
Low drift: 0.1 µV/°C, G ≥ 100
Low noise: 50 nV/√ Hz, G ≥ 100
High CMRR: 96 dB (minimum), G ≥ 10
Low input bias current: 280 pA (maximum)
Supply range: 1.8 V to 5.5 V
Input voltage: (V–) + 0.1 V to (V+) – 0.1 V
Output range: (V–) + 0.05 V to (V+) – 0.05 V
Low quiescent current: 50 µA
Operating temperature: –40°C to +125°C
RFI filtered inputs
Package: 8-pin VSSOP

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C ≤ T A ≤ +125°C
Functional Safety-Capable
- Documentation available to aid functional safety system design
Low offset voltage: 25 µV (maximum), G ≥ 100
Low drift: 0.1 µV/°C, G ≥ 100
Low noise: 50 nV/√ Hz, G ≥ 100
High CMRR: 96 dB (minimum), G ≥ 10
Low input bias current: 280 pA (maximum)
Supply range: 1.8 V to 5.5 V
Input voltage: (V–) + 0.1 V to (V+) – 0.1 V
Output range: (V–) + 0.05 V to (V+) – 0.05 V
Low quiescent current: 50 µA
Operating temperature: –40°C to +125°C
RFI filtered inputs
Package: 8-pin VSSOP

The INA333-Q1 is a low-power, precision instrumentation amplifier offering excellent accuracy. The three-op-amp design, small size, and low power make this device an excellent choice for automotive applications that require precise measurements, such as current leakage detection. This INA333-Q1 is also a great choice for applications that use resistive bridge sensors.

A single external resistor sets any gain from 1 to 1000. The INA333-Q1 is designed to use an industry-standard gain equation: G = 1 + (100 kΩ / R G).

The INA333-Q1 provides very low offset voltage (25 µV, G ≥ 100), excellent offset voltage drift (0.1 µV/°C, G ≥ 100), and high common-mode rejection (96 dB at G ≥ 10). The device operates with power supplies as low as 1.8 V (±0.9 V), and quiescent current is only 50 µA. Auto-calibration techniques maintain excellent precision over the automotive temperature range. The INA333-Q1 provides a very low peak-to-peak noise of 1 µV.

The INA333-Q1 device is available in an 8-pin VSSOP package and is specified over the T A = –40°C to +125°C temperature range.

The INA333-Q1 is a low-power, precision instrumentation amplifier offering excellent accuracy. The three-op-amp design, small size, and low power make this device an excellent choice for automotive applications that require precise measurements, such as current leakage detection. This INA333-Q1 is also a great choice for applications that use resistive bridge sensors.

A single external resistor sets any gain from 1 to 1000. The INA333-Q1 is designed to use an industry-standard gain equation: G = 1 + (100 kΩ / R G).

The INA333-Q1 provides very low offset voltage (25 µV, G ≥ 100), excellent offset voltage drift (0.1 µV/°C, G ≥ 100), and high common-mode rejection (96 dB at G ≥ 10). The device operates with power supplies as low as 1.8 V (±0.9 V), and quiescent current is only 50 µA. Auto-calibration techniques maintain excellent precision over the automotive temperature range. The INA333-Q1 provides a very low peak-to-peak noise of 1 µV.

The INA333-Q1 device is available in an 8-pin VSSOP package and is specified over the T A = –40°C to +125°C temperature range.

filter

尋找其它儀器放大器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

針腳對針腳的功能與所比較的裝置相同。

INA333

現行

低功耗、零漂移、精密儀器放大器 Industrial version with same AC and DC specifications.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

重要文件	類型	標題	格式選項	日期
*	資料表	INA333-Q1 Automotive, Zerø-Drift, micro-Power Instrumentation Amplifier datasheet (Rev. B)	PDF \| HTML	2023/6/12
	功能安全資訊	INA333-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA	PDF \| HTML	2022/7/14
	應用說明	Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps	PDF \| HTML	2021/7/27

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INAEVM — 通用儀器放大器評估模組

The universal INAEVM (Instrumentation Amplifier Evaluation Module) is available in two package options that simplify prototyping precision instrumentation amplifiers in either the SO-8 (D) package or the MSOP-8(DGK) package with the pinout shown. See the chart in the user guide (...)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

模擬型號