支援軟體
ADS1282-C-EXAMPLE-CODE — ADS1282 example C code
Expedite your embedded design using this example C code for the ADS1282
ADS1282-HT
- High Resolution: 124-dB SNR (1000 SPS)
- High Accuracy: THD: –102 dB
INL: 0.5 ppm - Low-Noise PGA
- Two-Channel Input MUX
- Inherently-Stable Modulator With Fast Responding
Over-Range Detection - Flexible Digital Filter:
- Sinc + FIR + IIR (Selectable)
- Linear or Minimum Phase Response
- Programmable High-Pass Filter
- Selectable FIR Data Rates: 250 SPS to 4
kSPS
- Filter Bypass Option
- Low-Power Consumption: 25 mW (210°C)
- Offset and Gain Calibration Engine
- SYNC Input
- Analog Supply: Unipolar (5 V) or Bipolar (±2.5 V)
- Digital Supply: 1.75 to 3.3 V
- Supports Extreme Temperature Applications(1)
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Extreme (–55°C to 210°C)
Temperature Range - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
The ADS1282-HT device is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). The ADS1282-HT device is suitable for the demanding needs of energy exploration and seismic monitoring environments.
The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.
The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.
The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.
The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.
Two operating modes allow optimization of noise and power. Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from –55°C to 210°C or from –55°C to 175°C for the PW package.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3 | 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | ADS1282-HT High-Temperature High-Resolution Delta Sigma ADC datasheet (Rev. H) | PDF | HTML | 2016年 2月 24日 |
| * | Radiation & reliability report | ADS1282HPW Reliability Report (Rev. A) | 2012年 8月 17日 | |
| * | Radiation & reliability report | ADS1282SJDJ Reliability Report | 2012年 5月 7日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
計算工具
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
支援產品和硬體
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| CDIP_SB (JDJ) | 28 | Ultra Librarian |
| DIESALE (KGD) | — | |
| TSSOP (PW) | 28 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點