首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS1261

現行

適用於工廠自動化且具有 PGA、VREF、IDAC 和 AC 激磁的 24 位元、40-kSPS、10 通道 delta-sigma ADC

立即訂購
產品規格表

ADS1261

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 24 Sample rate (max) (ksps) 40 Number of input channels 10 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.5, 5 Input voltage range (min) (V) -2.5, 0 Features 50/60 Hz Rejection, Excitation Current Sources (iDACs), GPIO, Oscillator, PGA, Temp Sensor Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 20 Analog supply voltage (min) (V) -2.5, 4.75 Analog supply voltage (max) (V) 2.5, 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
Resolution (Bits) 24 Sample rate (max) (ksps) 40 Number of input channels 10 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.5, 5 Input voltage range (min) (V) -2.5, 0 Features 50/60 Hz Rejection, Excitation Current Sources (iDACs), GPIO, Oscillator, PGA, Temp Sensor Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 20 Analog supply voltage (min) (V) -2.5, 4.75 Analog supply voltage (max) (V) 2.5, 5.25 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
VQFN (RHB) 32 25 mm² 5 x 5
  • 24-bit, high-precision ADCs
    • Offset drift: 1 nV/°C
    • Gain drift: 0.5 ppm/°C
    • Noise: 30 nVRMS (20 SPS, gain = 128)
    • Linearity: 2 ppm
  • CMOS PGA gain: 1 to 128
  • Wide input voltage range: ±7 mV to ±5 V
  • Data rate: 2.5 SPS to 40 kSPS
  • 2.5-V reference: 2 ppm/°C
  • Simultaneous 50-Hz and 60-Hz rejection mode
  • Single-cycle settling mode
  • Signal and reference monitors
  • 5-V or ±2.5-V power supply
  • Internal temperature sensor
  • Cyclic redundancy check (CRC)
  • Excitation current sources
  • Sensor burn-out current sources
  • Four general-purpose inputs/outputs (ADS1261)
  • AC excitation for bridge sensors (ADS1261)
  • 5-mm × 5-mm VQFN package
  • 24-bit, high-precision ADCs
    • Offset drift: 1 nV/°C
    • Gain drift: 0.5 ppm/°C
    • Noise: 30 nVRMS (20 SPS, gain = 128)
    • Linearity: 2 ppm
  • CMOS PGA gain: 1 to 128
  • Wide input voltage range: ±7 mV to ±5 V
  • Data rate: 2.5 SPS to 40 kSPS
  • 2.5-V reference: 2 ppm/°C
  • Simultaneous 50-Hz and 60-Hz rejection mode
  • Single-cycle settling mode
  • Signal and reference monitors
  • 5-V or ±2.5-V power supply
  • Internal temperature sensor
  • Cyclic redundancy check (CRC)
  • Excitation current sources
  • Sensor burn-out current sources
  • Four general-purpose inputs/outputs (ADS1261)
  • AC excitation for bridge sensors (ADS1261)
  • 5-mm × 5-mm VQFN package

The ADS1260 and ADS1261 (ADS126x) are precision, 40-kSPS, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) that include a programmable gain amplifier (PGA). The devices also include a precision voltage reference and internal fault monitors. The sensor-ready ADCs give a high-accuracy, single-chip solution for the most demanding measurements, for example, weigh scales and resistance temperature detectors (RTDs).

The ADCs contain an input signal multiplexer, a low-noise PGA (with gains from 1 to 128), a 24-bit ΔΣ modulator, a precision voltage reference, and a programmable digital filter.

The high-impedance PGA inputs (1 GΩ) decrease measurement error due to sensor loading. The ADS1260 supports three differential or five single-ended inputs. The ADS1261 supports five differential or ten single-ended inputs. The integrated current sources simplify the measurement of RTDs.

The flexible digital filter is programmable for single-cycle settled conversions, while supplying simultaneous 50-Hz and 60-Hz line cycle rejection. Signal and reference monitors, a temperature sensor, and CRC data verification make data reliability better.

The ADS126x are pin compatible devices given in a 5-mm × 5-mm VQFN package and are specified across the –40°C to +125°C temperature range.

The ADS1260 and ADS1261 (ADS126x) are precision, 40-kSPS, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) that include a programmable gain amplifier (PGA). The devices also include a precision voltage reference and internal fault monitors. The sensor-ready ADCs give a high-accuracy, single-chip solution for the most demanding measurements, for example, weigh scales and resistance temperature detectors (RTDs).

The ADCs contain an input signal multiplexer, a low-noise PGA (with gains from 1 to 128), a 24-bit ΔΣ modulator, a precision voltage reference, and a programmable digital filter.

The high-impedance PGA inputs (1 GΩ) decrease measurement error due to sensor loading. The ADS1260 supports three differential or five single-ended inputs. The ADS1261 supports five differential or ten single-ended inputs. The integrated current sources simplify the measurement of RTDs.

The flexible digital filter is programmable for single-cycle settled conversions, while supplying simultaneous 50-Hz and 60-Hz line cycle rejection. Signal and reference monitors, a temperature sensor, and CRC data verification make data reliability better.

The ADS126x are pin compatible devices given in a 5-mm × 5-mm VQFN package and are specified across the –40°C to +125°C temperature range.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 18
重要文件 類型 標題 格式選項 日期
* Data sheet ADS126x Precision, 5-channel and 10-channel, 40-kSPS, 24-bit, delta-sigma ADCs with PGA and monitors datasheet (Rev. C) PDF | HTML 2019年 1月 22日
Application note K-type thermocouple measurement circuit with precision ADC (Rev. A) PDF | HTML 2024年 9月 20日
Circuit design 3-Wire PT100 RTD Measurement Circuit w/ High-Side Reference & 2 IDAC Current Sou (Rev. A) PDF | HTML 2024年 9月 18日
Application note Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 2024年 3月 18日
Application note A Basic Guide to Bridge Measurements (Rev. A) PDF | HTML 2024年 3月 13日
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023年 12月 6日
Analog Design Journal 為精密 ADC 供電：平均電流相對於瞬態電流 PDF | HTML 2023年 12月 1日
Application note A Basic Guide to RTD Measurements (Rev. A) PDF | HTML 2023年 3月 29日
Application note A Basic Guide to Thermocouple Measurements (Rev. A) PDF | HTML 2023年 3月 29日
Application note Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023年 3月 29日
Application note ADS124S08 3-Wire PT100 RTD Measurement Circuit w/ Low-Side Reference and 1 IDAC (Rev. B) 2021年 9月 9日
Application note Communication Methods for Data Integrity Using Delta-Sigma Data Converters (Rev. A) PDF | HTML 2021年 8月 23日
Application brief Reduce Bridge Measurement Offset and Drift Using the AC Excitation Mode (Rev. A) PDF | HTML 2021年 4月 1日
Application note RTD Wire-Break Detection Using Precision Delta-Sigma ADCs PDF | HTML 2021年 2月 18日
E-book Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020年 6月 19日
Technical article Top 10 questions about noise in high-resolution delta-sigma ADCs PDF | HTML 2019年 1月 17日
Analog Design Journal How delta-sigma ADCs work, Part 1 (Rev. A) 2016年 9月 19日
Analog Design Journal How delta-sigma ADCs work, Part 2 2011年 11月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS1261EVM — ADS1261 評估模組

ADS1261 評估模組 (EVM) 是用於評估 ADS1261 類比轉數位轉換器 (ADC) 的平台。ADS1261 是一款低漂移、24 位元、40kSPS、10 通道的 delta-sigma (ΔΣ) ADC，其整合 PGA、電壓參考和內部故障監控器。這款感測器就緒型 ADC 可提供高準確度的單晶片量測解決方案，適用於最嚴苛的量測，包括磅秤、應變計量計感測器、熱電偶和電阻溫度偵測器 (RTD)。

提供 ADS1261EVM 和 ΔΣ EvaluaTIon 軟體 (DELTASIGMAEVAL-GUI) 以縮短原型開發時間，加快產品上市速度。

使用指南: PDF
View Options
應用軟體及架構

ADC-TEMP-SENSOR-FW — Temperature-sensor firmware source files

This temperature-sensor linearization firmware provides a software routine for measuring and linearizing most common temperature sensors, including resistance temperature detectors (RTDs), thermocouples, thermistors (NTC, PTC, etc.) and analog temperature sensors.

This software includes an (...)

支援產品和硬體

支援產品和硬體
下載選項
支援軟體

ADS1261-C-EXAMPLE-CODE — ADS1261 example C code

Expedite your embedded design using this example C code for the ADS1261 product family
支援產品和硬體

支援產品和硬體
下載
模擬型號

ADS1261 IBIS Model (Rev. A)

SBAM375A.ZIP (48 KB) - IBIS Model
下載
計算工具

ADC-DESIGN-CALC — Online design calculator tool for TI Precision ADCs

ADC-DESIGN-CALC is an online resource with multiple ADC calculator tools (such as Digital Filter Response, Code-to-Voltage, CMR, CRC, etc.) for TI Precision ADCs.
支援產品和硬體

支援產品和硬體
啟動
計算工具

ADC-RTD-CONFIG-CALC — RTD Configuration Calculator for Precision ADCs

This resistance temperature detector (RTD) configuration calculator is a Microsoft® Excel-based tool that helps the user identify a system solution for an RTD application. Two-, three- and four-wire RTD configurations are shown by default, with options for a high-side or low-side reference (...)

支援產品和硬體

支援產品和硬體
下載
計算工具

ADS1261-EXCEL-CALC-TOOL — ADS1261 Design Calculator

The ADS1261 Excel™ calculator tool provides the user with several easy-to-use tools to simplify the configuration of the ADS1260 and ADS1261. To ensure proper device functionality, the tool includes a common-mode-range calculator to easily determine if the input, supply voltage, and gain (...)

支援產品和硬體

支援產品和硬體
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體

支援產品和硬體
啟動
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片