首頁 放大器 電流感測放大器 類比電流感測放大器
首頁
放大器
電流感測放大器
類比電流感測放大器

INA2191

現行

採用 wcsp 且具有 picoamp IB 和啟用功能的 40-V、雙通道、雙向、超精密電流感測放大器

立即訂購
產品規格表

INA2191

現行
產品規格表 立即訂購

產品詳細資料

Product type Analog output Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.2 Input offset (±) (max) (µV) 12 Input offset drift (±) (typ) (µV/°C) 0.01 Features Bidirectional, Low-side Capable, Ultra precise Rating Catalog Voltage gain (V/V) 25, 50, 100, 200, 500 CMRR (min) (dB) 132 Bandwidth (kHz) 27, 32, 33, 35, 37, 45 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 1.7 Iq (max) (mA) 0.18 Number of channels 2 Comparators (#) 0 Gain error (%) 0.25 Gain error drift (±) (max) (ppm/°C) 7 Slew rate (V/µs) 0.3 Operating temperature range (°C) -40 to 125
Product type Analog output Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.2 Input offset (±) (max) (µV) 12 Input offset drift (±) (typ) (µV/°C) 0.01 Features Bidirectional, Low-side Capable, Ultra precise Rating Catalog Voltage gain (V/V) 25, 50, 100, 200, 500 CMRR (min) (dB) 132 Bandwidth (kHz) 27, 32, 33, 35, 37, 45 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 1.7 Iq (max) (mA) 0.18 Number of channels 2 Comparators (#) 0 Gain error (%) 0.25 Gain error drift (±) (max) (ppm/°C) 7 Slew rate (V/µs) 0.3 Operating temperature range (°C) -40 to 125
DSBGA (YBJ) 12 1.89607 mm² 1.21 x 1.567
  • Low power:
    • Supply voltage, V S: 1.7 V to 5.5 V
    • Shutdown current: 100 nA (max INA191)
    • Quiescent current: 43 µA at 25 °C (INA191)
  • Low input bias currents: 100 pA (typical) (enables microamp current measurement)
  • Bidirectional current measurement (INA2191)
  • Accuracy:
    • ±0.25% max gain error (A2 to A5 devices)
    • 7-ppm/°C gain drift (maximum)
    • ±12 µV (maximum) offset voltage
    • 0.13-µV/°C offset drift (maximum)
  • Wide common-mode voltage: –0.2 V to +40 V
  • Gain options:
    • INAx191A1: 25 V/V
    • INAx191A2: 50 V/V
    • INAx191A3: 100 V/V
    • INAx191A4: 200 V/V
    • INAx191A5: 500 V/V
  • Packages:
    • INA191: 0.895-mm 2 DSBGA
    • INA2191: 1.79-mm 2 DSBGA
  • Low power:
    • Supply voltage, V S: 1.7 V to 5.5 V
    • Shutdown current: 100 nA (max INA191)
    • Quiescent current: 43 µA at 25 °C (INA191)
  • Low input bias currents: 100 pA (typical) (enables microamp current measurement)
  • Bidirectional current measurement (INA2191)
  • Accuracy:
    • ±0.25% max gain error (A2 to A5 devices)
    • 7-ppm/°C gain drift (maximum)
    • ±12 µV (maximum) offset voltage
    • 0.13-µV/°C offset drift (maximum)
  • Wide common-mode voltage: –0.2 V to +40 V
  • Gain options:
    • INAx191A1: 25 V/V
    • INAx191A2: 50 V/V
    • INAx191A3: 100 V/V
    • INAx191A4: 200 V/V
    • INAx191A5: 500 V/V
  • Packages:
    • INA191: 0.895-mm 2 DSBGA
    • INA2191: 1.79-mm 2 DSBGA

The INAx191 is a low-power, voltage-output, current-shunt monitor (also called a current-sense amplifier) that is commonly used for overcurrent protection, precision-current measurement for system optimization, or in closed-loop feedback circuits. This device can sense drops across shunts at common-mode voltages from –0.2 V to +40 V, independent of the supply voltage. The low input bias current of the INAx191 permits the use of larger current-sense resistors, and thus provides accurate current measurements in the µA range. Five fixed gains are available: 25 V/V, 50 V/V, 100 V/V, 200 V/V, or 500 V/V. The low offset voltage of the zero-drift architecture extends the dynamic range of the current measurement, and allows for smaller sense resistors with lower power loss while still providing accurate current measurements.

The INA191 operates from a single 1.7-V to 5.5-V power supply, drawing a maximum of 65 µA of supply current when enabled and only 100 nA when disabled. The device is specified over the operating temperature range of –40 °C to +125 °C, and offered in a DSBGA-6 (INA191) and DSBGA-12 (INA2191) packages.

The INAx191 is a low-power, voltage-output, current-shunt monitor (also called a current-sense amplifier) that is commonly used for overcurrent protection, precision-current measurement for system optimization, or in closed-loop feedback circuits. This device can sense drops across shunts at common-mode voltages from –0.2 V to +40 V, independent of the supply voltage. The low input bias current of the INAx191 permits the use of larger current-sense resistors, and thus provides accurate current measurements in the µA range. Five fixed gains are available: 25 V/V, 50 V/V, 100 V/V, 200 V/V, or 500 V/V. The low offset voltage of the zero-drift architecture extends the dynamic range of the current measurement, and allows for smaller sense resistors with lower power loss while still providing accurate current measurements.

The INA191 operates from a single 1.7-V to 5.5-V power supply, drawing a maximum of 65 µA of supply current when enabled and only 100 nA when disabled. The device is specified over the operating temperature range of –40 °C to +125 °C, and offered in a DSBGA-6 (INA191) and DSBGA-12 (INA2191) packages.
filter 尋找其它 類比電流感測放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
INA191 現行 採用 WCSP 封裝、具有 picoamp IB 和啟用功能的 40V、超精密電流感測放大器 Single-channel with similar performance

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet INAx191 40-V, Bidirectional, Ultra-Precise Current Sense Amplifier With picoamp IB and ENABLE in WCSP Package datasheet (Rev. C) PDF | HTML 2021年 8月 2日
Application note Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 2024年 11月 18日
Application note Using a PCB Copper Trace as a Current-Sense Shunt Resistor PDF | HTML 2022年 1月 25日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA2191EVM — 適用於 40-V、雙通道、雙向電流感測放大器的 INA2191 評估模組

此模組設計用於評估雙通道、高輸入阻抗電流感測放大器裝置 INA2191。評估模組 (EVM) 包括板載插座和焊盤，可讓您輕鬆完整的進行配置與測試。排針及跨接器可快速設定裝置參考電壓和觸發接腳。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

INA2191 TINA-TI Spice Model

SBOMC67.ZIP (1211 KB) - TINA-TI Spice Model
下載
模擬型號

INA2191A1 PSpice Model

SBOMC70.ZIP (10 KB) - PSpice Model
下載
模擬型號

INA2191A2 PSpice Model

SBOMC71.ZIP (10 KB) - PSpice Model
下載
模擬型號

INA2191A3 PSpice Model

SBOMC72.ZIP (10 KB) - PSpice Model
下載
模擬型號

INA2191A4 PSpice Model

SBOMC73.ZIP (10 KB) - PSpice Model
下載
模擬型號

INA2191A5 PSpice Model

SBOMC68.ZIP (10 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
計算工具

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

This Excel calculator provides a comparison between two and five of our standard current sense amplifiers, delivering a chart containing the basic parameters of each device. This calculator also takes system condition inputs from users such as common-mode voltage, supply voltage, shunt resistor (...)
支援產品和硬體

支援產品和硬體
下載
設計工具

CIRCUIT060035 — 具有窗型比較器電路的雙向電流感測

此雙向電流感測解決方案採用電流感測放大器與高速雙比較器，並具備軌對軌輸入共模範圍，可在比較器輸出 (OUTA 和 OUTB) 處建立過電流 (OC) 警示訊號，如果輸入電流 (IG1) 高於 100 A 或降至 -35 A 以下。在此實作中，兩個過電流警示訊號都是高電位作動，因此當超過 100 A 或 -35 A 閾值時，比較器輸出將會變高。在兩個比較器上實作外部磁滯，因此當電流降低 10% (90 A 和 -31 A) 時，比較器輸出將回到邏輯低狀態。雖然下方電路將分流電阻器 R8 連接至接地，但相同的電路仍適用於高壓側電流感測，最高可達 INA 的共模電壓範圍。
View Options
設計工具

CIRCUIT060037 — 精密過電流閂鎖電路

這個高壓側電流感測解決方案採用電流感測放大器、含整合式參考的比較器以及 P 通道 MOSFET，以建立過電流閂鎖電路。當偵測到負載電流大於 200 mA 時，電路會中斷系統與電源的連接。比較器輸出將閂鎖 (將 P 通道 MOSFET 的閘極電壓保持在 0 V)，直到電路的電源開始循環，因為比較器會驅動 P 通道 MOSFET 的閘極，並將訊號傳送回電流感測放大器的參考針腳。
View Options
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YBJ) 12 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片