首頁 數據轉換器 類比轉數位轉換器 (ADC) 高速 ADC (≥10 MSPS)
首頁
數據轉換器
類比轉數位轉換器 (ADC)
高速 ADC (≥10 MSPS)

ADS5463-EP

現行

12 位元 500-MSPS 類比轉數位轉換器 - 強化型產品

立即訂購
產品規格表

ADS5463-EP

現行
產品規格表 立即訂購

產品詳細資料

Sample rate (max) (Msps) 500 Resolution (Bits) 12 Number of input channels 1 Interface type Parallel LVDS Analog input BW (MHz) 2000 Features High Performance Rating HiRel Enhanced Product Peak-to-peak input voltage range (V) 2.2 Power consumption (typ) (mW) 2250 Architecture Pipeline SNR (dB) 65.4 ENOB (Bits) 10.5 SFDR (dB) 90 Operating temperature range (°C) -55 to 125 Input buffer Yes
Sample rate (max) (Msps) 500 Resolution (Bits) 12 Number of input channels 1 Interface type Parallel LVDS Analog input BW (MHz) 2000 Features High Performance Rating HiRel Enhanced Product Peak-to-peak input voltage range (V) 2.2 Power consumption (typ) (mW) 2250 Architecture Pipeline SNR (dB) 65.4 ENOB (Bits) 10.5 SFDR (dB) 90 Operating temperature range (°C) -55 to 125 Input buffer Yes
HTQFP (PFP) 80 196 mm² 14 x 14
  • 500-MSPS Sample Rate
  • 12-Bit Resolution, 10.5-Bits Effective Number of Bits (ENOB)
  • 2-GHz Input Bandwidth
  • SFDR = 75 dBc at 450 MHz and 500 MSPS
  • SNR = 64.6 dBFS at 450 MHz and 500 MSPS
  • 2.2-Vpp Differential Input Voltage
  • LVDS-Compatible Outputs
  • Total Power Dissipation: 2.2 W
  • Offset Binary Output Format
  • Output Data Transitions on the Rising and Falling Edges of a Half-Rate Output Clock
  • On-Chip Analog Buffer, Track and Hold, and Reference Circuit
  • 80-Pin TQFP PowerPAD™ Package (14 mm × 14 mm)
  • Pin Similar to ADS5440/ADS5444
  • APPLICATIONS
    • Test and Measurement Instrumentation
    • Software-Defined Radio
    • Data Acquisition
    • Power Amplifier Linearization
    • Communication Instrumentation
    • Radar
    • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
      • Controlled Baseline
      • One Assembly/Test Site
      • One Fabrication Site
      • Available in Military (–55°C/125°C) Temperature Range(1)
      • Extended Product Life Cycle
      • Extended Product-Change Notification
      • Product Traceability

(1) Additional temperature ranges available - contact factory
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.s
  • 500-MSPS Sample Rate
  • 12-Bit Resolution, 10.5-Bits Effective Number of Bits (ENOB)
  • 2-GHz Input Bandwidth
  • SFDR = 75 dBc at 450 MHz and 500 MSPS
  • SNR = 64.6 dBFS at 450 MHz and 500 MSPS
  • 2.2-Vpp Differential Input Voltage
  • LVDS-Compatible Outputs
  • Total Power Dissipation: 2.2 W
  • Offset Binary Output Format
  • Output Data Transitions on the Rising and Falling Edges of a Half-Rate Output Clock
  • On-Chip Analog Buffer, Track and Hold, and Reference Circuit
  • 80-Pin TQFP PowerPAD™ Package (14 mm × 14 mm)
  • Pin Similar to ADS5440/ADS5444
  • APPLICATIONS
    • Test and Measurement Instrumentation
    • Software-Defined Radio
    • Data Acquisition
    • Power Amplifier Linearization
    • Communication Instrumentation
    • Radar
    • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
      • Controlled Baseline
      • One Assembly/Test Site
      • One Fabrication Site
      • Available in Military (–55°C/125°C) Temperature Range(1)
      • Extended Product Life Cycle
      • Extended Product-Change Notification
      • Product Traceability

(1) Additional temperature ranges available - contact factory
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.s

The ADS5463 is a 12-bit, 500-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply, while providing LVDS-compatible digital outputs. The ADS5463 input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high impedance input. An internal reference generator also is provided to simplify the system design.

Designed to optimize conversion of wide-bandwidth signals up to 500-MHz of input frequency at 500 MSPS, the ADS5463 has outstanding low noise and linearity over a large input frequency range. Input signals above 500 MHz also can be converted due to the large input bandwidth of the device.

The ADS5463 is available in an 80-pin TQFP PowerPAD™ package. The ADS5463 is built on state-of-the-art Texas Instruments complementary bipolar process (BiCom3X) and is specified over the full extended temperature range (–55°C to 125°C).

The ADS5463 is a 12-bit, 500-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply, while providing LVDS-compatible digital outputs. The ADS5463 input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high impedance input. An internal reference generator also is provided to simplify the system design.

Designed to optimize conversion of wide-bandwidth signals up to 500-MHz of input frequency at 500 MSPS, the ADS5463 has outstanding low noise and linearity over a large input frequency range. Input signals above 500 MHz also can be converted due to the large input bandwidth of the device.

The ADS5463 is available in an 80-pin TQFP PowerPAD™ package. The ADS5463 is built on state-of-the-art Texas Instruments complementary bipolar process (BiCom3X) and is specified over the full extended temperature range (–55°C to 125°C).
filter 尋找其它 高速 ADC (≥10 MSPS)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 日期
* Data sheet 12 Bit, 500 MSPS Analog-to-Digital Converter datasheet (Rev. C) 2009年 10月 8日
* VID ADS5463-EP VID V6207607 2016年 6月 21日
Application note Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A) 2010年 9月 10日
Application note Smart Selection of ADC/DAC Enables Better Design of Software-Defined Radio 2009年 4月 28日
Application note CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital Converters 2008年 6月 8日
Application note Phase Noise Performance and Jitter Cleaning Ability of CDCE72010 2008年 6月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PFP) 80 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片