首頁 數據轉換器 數位轉類比轉換器 (DAC) 精密 DAC (≤10 MSPS)
首頁
數據轉換器
數位轉類比轉換器 (DAC)
精密 DAC (≤10 MSPS)

AFE781H1

現行

適用於感測器發射器的 14 位元低功耗類比前端 (AFE)，搭配 DAC、ADC 和 HART® 數據機

立即訂購
產品規格表

AFE781H1

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 14 Number of DAC channels 1 Interface type SPI Output type Voltage Output voltage range (V) 0.15 to 1.25, 0.2 to 1.0, 0.3 to 2.5, 0.4 to 2.0 Reference type INT/EXT Architecture STRING Rating Catalog Features 4-20mA loop transmitter, HART, HART Modem Power consumption (typ) (mW) 0.342 Operating temperature range (°C) -55 to 125 Product type Special-function DAC ADC resolution (bps) 12 DAC resolution (bps) 14
Resolution (Bits) 14 Number of DAC channels 1 Interface type SPI Output type Voltage Output voltage range (V) 0.15 to 1.25, 0.2 to 1.0, 0.3 to 2.5, 0.4 to 2.0 Reference type INT/EXT Architecture STRING Rating Catalog Features 4-20mA loop transmitter, HART, HART Modem Power consumption (typ) (mW) 0.342 Operating temperature range (°C) -55 to 125 Product type Special-function DAC ADC resolution (bps) 12 DAC resolution (bps) 14
UQFN (RRU) 24 16 mm² (4 mm × 4 mm)
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design: AFE881H1, AFE781H1
  • Low quiescent current: 180 µA (typical)
  • HART-compliant physical layer modem
  • 16-bit or 14-bit monotonic high-performance DAC
    • 1.8-V supply: 0.15 V to 1.25 V, 0.2 V to 1.0 V
    • 5-V supply: 0.3 V to 2.5 V, 0.4 V to 2.0 V
    • 4-LSB INL at 16 bits
    • 0.07% FSR (max) TUE from –40°C to +125°C
  • 12-bit 3.84-kSPS ADC for advanced diagnostics
  • Integrated 1.25-V reference at 10 ppm/°C (max)
  • Internal 1.2288-MHz oscillator with clock output
  • Digital interface
    • Serial peripheral interface (SPI): Shared bus for both DAC and HART
    • Universal asynchronous receiver-transmitter (UART): Shared bus for both DAC and HART
    • Both: SPI for DAC and UART for HART
  • Fault detection: CRC bit error checking, windowed watchdog timer, diagnostic ADC
  • Digital DAC slew-rate control
  • Wide operating temperature: –55°C to +125°C
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design: AFE881H1, AFE781H1
  • Low quiescent current: 180 µA (typical)
  • HART-compliant physical layer modem
  • 16-bit or 14-bit monotonic high-performance DAC
    • 1.8-V supply: 0.15 V to 1.25 V, 0.2 V to 1.0 V
    • 5-V supply: 0.3 V to 2.5 V, 0.4 V to 2.0 V
    • 4-LSB INL at 16 bits
    • 0.07% FSR (max) TUE from –40°C to +125°C
  • 12-bit 3.84-kSPS ADC for advanced diagnostics
  • Integrated 1.25-V reference at 10 ppm/°C (max)
  • Internal 1.2288-MHz oscillator with clock output
  • Digital interface
    • Serial peripheral interface (SPI): Shared bus for both DAC and HART
    • Universal asynchronous receiver-transmitter (UART): Shared bus for both DAC and HART
    • Both: SPI for DAC and UART for HART
  • Fault detection: CRC bit error checking, windowed watchdog timer, diagnostic ADC
  • Digital DAC slew-rate control
  • Wide operating temperature: –55°C to +125°C

The 16-bit AFE881H1 and 14-bit AFE781H1 ( AFEx81H1) are highly-integrated, high-accuracy, extremely low-power digital-to-analog converters (DACs) with voltage outputs designed for HART-enabled sensor-transmitter applications.

The AFEx81H1 devices include most of the components required to design a 4‑mA to 20‑mA, 2‑wire (loop-powered) sensor transmitter. In addition to the highly accurate DAC, these parts include a HART-certified FSK modem, 10‑ppm/°C voltage reference, and diagnostic analog-to-digital converter (ADC). To accommodate intrinsic and functional safety concerns, external voltage-to-current conversion and power regulation are required.

The internal diagnostic ADC is multiplexed to several internal nodes that enable an automatic self-health check. If any fault is detected from the diagnostic ADC, CRC frame-error checking, or windowed watchdog timer, the devices can optionally issue an interrupt, enter a fail-safe state corresponding to a standard NAMUR output value or user-specified custom value, or both.

These devices operate from supplies as low as 1.71 V with 220 µA maximum quiescent current. The devices are specified over the temperature range of –40°C to +125°C, but are functional from –55°C to +125°C.

The 16-bit AFE881H1 and 14-bit AFE781H1 ( AFEx81H1) are highly-integrated, high-accuracy, extremely low-power digital-to-analog converters (DACs) with voltage outputs designed for HART-enabled sensor-transmitter applications.

The AFEx81H1 devices include most of the components required to design a 4‑mA to 20‑mA, 2‑wire (loop-powered) sensor transmitter. In addition to the highly accurate DAC, these parts include a HART-certified FSK modem, 10‑ppm/°C voltage reference, and diagnostic analog-to-digital converter (ADC). To accommodate intrinsic and functional safety concerns, external voltage-to-current conversion and power regulation are required.

The internal diagnostic ADC is multiplexed to several internal nodes that enable an automatic self-health check. If any fault is detected from the diagnostic ADC, CRC frame-error checking, or windowed watchdog timer, the devices can optionally issue an interrupt, enter a fail-safe state corresponding to a standard NAMUR output value or user-specified custom value, or both.

These devices operate from supplies as low as 1.71 V with 220 µA maximum quiescent current. The devices are specified over the temperature range of –40°C to +125°C, but are functional from –55°C to +125°C.
filter 尋找其它 精密 DAC (≤10 MSPS)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
AFE881H1 現行 適用於感測器發射器的 16 位元低功耗類比前端 (AFE)，搭配 DAC、ADC 和 HART® 數據機 Higher resolution (16-bit)

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 AFEx81H1 16-Bit and 14-Bit, Low-Power DACs With Internal HART® Modem, Voltage Reference, and Diagnostic ADC for 4-mA to 20-mA Loop-Powered Applications datasheet PDF | HTML 2023/3/15
應用說明 A Simple, Java-Based CRC Calculator PDF | HTML 2026/3/4
應用說明 HART-Enabled Transmitter Based on an Evaluation Module Design PDF | HTML 2025/3/26
應用說明 Design and Test of a HART-Enabled Field Transmitter for 4-20mA Loops PDF | HTML 2024/10/17
應用說明 A Basic Guide to the HART Protocol PDF | HTML 2023/11/9
Application brief Ultra-Low-Power, Low-Voltage, 2-Wire, 4- to 20-mA Loop Transmitter Using AFE881H PDF | HTML 2023/3/3
功能安全資訊 AFE781H1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2022/9/27

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AFE881H1EVM — 適用具 DAC、ADC 和 HART® 數據機的 16 位元低功耗 AFE 之 AFE881H1 評估模組

AFE881H1 評估模組 (EVM) 是評估 AFE881H1 的平台，此裝置為高度整合、高準確度、超低功耗的 16 位元數位轉類比轉換器 (DAC)，且具專為支援 HART® 感測器發射器應用所設計的電壓輸出。

AFE881H1 也配備循環冗餘檢查 (CRC) 故障偵測功能，以及適用進階診斷的 12 位元 1-kSPS 類比轉數位轉換器 (ADC)。

USB2ANY 介面工具 (另售) 將 GUI 與 AFE88H1EVM 結合，使用時必須具備此工具。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

AFE881H1EVM-GUI — AFE881H1EVM GUI installer

The AFE881H1EVM-GUI is a windows-based software GUI that controls the AFE881H1EVM through SPI communications using the USB2ANY interface adapter tool.
支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
UQFN (RRU) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片