INA3221
- Senses bus voltages from 0V to 26V
- Reports shunt and bus voltage
- High accuracy:
- Offset voltage: ±80µV (maximum)
- Gain error: 0.25% (maximum)
- Configurable averaging options
- Four programmable addresses
- Programmable alert and warning outputs
- Power-supply operation: 2.7V to 5.5V
The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface. The INA3221 monitors both shunt voltage drops and bus supply voltages, in addition to having programmable conversion times and averaging modes for these signals. The INA3221 offers both critical and warning alerts to detect multiple programmable out-of-range conditions for each channel.
The INA3221 senses current on buses that can vary from 0V to 26V. The device is powered from a single 2.7V to 5.5V supply, and draws 350µA (typ) of supply current. The INA3221 is specified over the operating temperature range of –40°C to +125°C. The I2C- and SMBUS-compatible interface features four programmable addresses.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
INA3221EVM — INA3221 評估模組
The INA3221EVM is a platform for evaluating the performance of the INA3221 under various signal, shunt, and supply conditions.
INA3221SW-LINUX — 適用於 INA3221 的 Linux 驅動程式
Linux Mainline Status
Available in Linux Main line: Yes
Available through git.ti.com: N/A
- ina3221
SBOC425 — INA3221EVM User Software
支援產品和硬體
產品
數位電源監測器
硬體開發
開發板
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
支援產品和硬體
產品
精密運算放大器 (Vos<1mV)
一般用途運算放大器
音訊運算放大器
轉阻放大器
高速運算放大器 (GBW ≥ 50 MHz)
功率運算放大器
視訊放大器
線路驅動器
轉導放大器與雷射驅動器
全差分放大器
精確 ADC
生物感測 AFE
高速 ADC (≥10 MSPS)
差分放大器
儀器放大器
類比電流感測放大器
數位電源監測器
配備整合式分流電阻器的類比電流感測放大器
具整合式分流電阻器的數位電源監測器
晶粒與晶圓服務
RF 接收器
RF 發射器
Specialty audio amplifiers
音訊 ADC
Application-specific data converters|MRI
CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool
支援產品和硬體
產品
數位電源監測器
類比電流感測放大器
SBOR021 — Power Monitor Tool
支援產品和硬體
產品
數位電源監測器
具整合式分流電阻器的數位電源監測器
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
TIDA-050034 — 適用於 NXP i.MX 7D 處理器的整合式電源供應參考設計
硬體設計包含 DDR3L SDRAM (2x512MB)、64MB 序列 NOR 快閃記憶體、8GB eMMC 5.0 iNAND、SD 卡介面 v3.0、用於外部 TFT 顯示介面的 50 針 LCD 連接器、1000Base-T 乙太網路、USB2.0 Type A 和 micro-AB、用於外部攝影機介面的 MIPI CSI 和 mini-PCIe 介面。
此設計適用於任何使用 i.MX 8M Mini 或 i.MX 8M Nano (...)
TIDA-050038 — 適用於 NXP i.MX 8M 迷你處理器的整合式電源供應參考設計
SoM 板與 8MMiniLPD4-EVK 基板相容,可進行完整系統評估。此設計適用於任何使用 i.MX 8M Mini 或 i.MX 8M Nano (...)
TIDA-050043 — 適用於 NXP i.MX 6ULL 處理器的整合式電源供應參考設計
此設計旨在用作電網通訊中資料集中器專案或使用 i.MX 6ULL、i.MX 6ULZ 或 i.MX 6UltraLite (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGV) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點