首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS112C04

現行

具 PGA、VREF、2 個 IDAC 和 I2C 介面的 16 位元、2-kSPS、4 通道、低功耗小尺寸 ΔΣ ADC

立即訂購
產品規格表

ADS112C04

現行
立即訂購

產品詳細資料

Resolution (Bits) 16 Sample rate (max) (ksps) 2 Number of input channels 4 Interface type I2C Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.85, 5.6 Input voltage range (min) (V) -2.85, 0 Features 50/60 Hz Rejection, Excitation Current Sources (iDACs), Oscillator, PGA, Small Size, Temp Sensor Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 1.4 Analog supply voltage (min) (V) -2.5, 2.3 Analog supply voltage (max) (V) 2.5, 5.5 Digital supply (min) (V) 2.3 Digital supply (max) (V) 5.5
Resolution (Bits) 16 Sample rate (max) (ksps) 2 Number of input channels 4 Interface type I2C Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Multiplexed Rating Catalog Reference mode External, Internal Input voltage range (max) (V) 2.85, 5.6 Input voltage range (min) (V) -2.85, 0 Features 50/60 Hz Rejection, Excitation Current Sources (iDACs), Oscillator, PGA, Small Size, Temp Sensor Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 1.4 Analog supply voltage (min) (V) -2.5, 2.3 Analog supply voltage (max) (V) 2.5, 5.5 Digital supply (min) (V) 2.3 Digital supply (max) (V) 5.5
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm) WQFN (RTE) 16 9 mm² (3 mm × 3 mm)
  • Current Consumption as Low as 315 µA (typ)
  • Wide Supply Range: 2.3 V to 5.5 V
  • Programmable Gain: 1 to 128
  • Programmable Data Rates: Up to 2 kSPS
  • 16-Bit, Noise-Free Resolution at 20 SPS
  • Simultaneous 50-Hz and 60-Hz Rejection at 20 SPS With Single-Cycle Settling Digital Filter
  • Two Differential or Four Single-Ended Inputs
  • Dual-Matched Programmable Current Sources:
    10 µA to 1.5 mA
  • Internal 2.048-V Reference: 5 ppm/°C (typ) Drift
  • Internal 2% Accurate Oscillator
  • Internal Temperature Sensor:
    0.5°C (typ) Accuracy
  • I2C-Compatible Interface
  • Supported I2C Bus Speed Modes:
    Standard-Mode, Fast-Mode, Fast-Mode Plus
  • 16 Pin-Configurable I2C Addresses
  • Package: 3.0-mm × 3.0-mm × 0.75-mm WQFN
  • Current Consumption as Low as 315 µA (typ)
  • Wide Supply Range: 2.3 V to 5.5 V
  • Programmable Gain: 1 to 128
  • Programmable Data Rates: Up to 2 kSPS
  • 16-Bit, Noise-Free Resolution at 20 SPS
  • Simultaneous 50-Hz and 60-Hz Rejection at 20 SPS With Single-Cycle Settling Digital Filter
  • Two Differential or Four Single-Ended Inputs
  • Dual-Matched Programmable Current Sources:
    10 µA to 1.5 mA
  • Internal 2.048-V Reference: 5 ppm/°C (typ) Drift
  • Internal 2% Accurate Oscillator
  • Internal Temperature Sensor:
    0.5°C (typ) Accuracy
  • I2C-Compatible Interface
  • Supported I2C Bus Speed Modes:
    Standard-Mode, Fast-Mode, Fast-Mode Plus
  • 16 Pin-Configurable I2C Addresses
  • Package: 3.0-mm × 3.0-mm × 0.75-mm WQFN

The ADS112C04 is a precision, 16-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications measuring small sensor signals. The device features two differential or four single-ended inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), two programmable excitation current sources, a voltage reference, an oscillator, and a precision temperature sensor.

The device can perform conversions at data rates up to 2000 samples-per-second (SPS) with single-cycle settling. At 20 SPS, the digital filter offers simultaneous 50-Hz and 60-Hz rejection for noisy industrial applications. The internal PGA offers gains up to 128. This PGA makes the ADS112C04 ideally suited for applications measuring small sensor signals, such as resistance temperature detectors (RTDs), thermocouples, thermistors, and resistive bridge sensors.

The ADS112C04 features a 2-wire, I2C-compatible interface that supports I2C bus speeds up to 1 Mbps. Two address pins allow selection of 16 different I2C addresses for the device.

The ADS112C04 is offered in a leadless 16-pin WQFN or a 16-pin TSSOP package and is specified over a temperature range of –40°C to +125°C.

The ADS112C04 is a precision, 16-bit, analog-to-digital converter (ADC) that offers many integrated features to reduce system cost and component count in applications measuring small sensor signals. The device features two differential or four single-ended inputs through a flexible input multiplexer (MUX), a low-noise, programmable gain amplifier (PGA), two programmable excitation current sources, a voltage reference, an oscillator, and a precision temperature sensor.

The device can perform conversions at data rates up to 2000 samples-per-second (SPS) with single-cycle settling. At 20 SPS, the digital filter offers simultaneous 50-Hz and 60-Hz rejection for noisy industrial applications. The internal PGA offers gains up to 128. This PGA makes the ADS112C04 ideally suited for applications measuring small sensor signals, such as resistance temperature detectors (RTDs), thermocouples, thermistors, and resistive bridge sensors.

The ADS112C04 features a 2-wire, I2C-compatible interface that supports I2C bus speeds up to 1 Mbps. Two address pins allow selection of 16 different I2C addresses for the device.

The ADS112C04 is offered in a leadless 16-pin WQFN or a 16-pin TSSOP package and is specified over a temperature range of –40°C to +125°C.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
ADS112U04 現行 具有 PGA、VREF、2 個 IDAC 和 UART 介面的 16 位元、2-kSPS、4 通道、低功耗小尺寸 delta-sigma ADC Has UART interface

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 15
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ADS112C04 16-Bit, 4-Channel, 2-kSPS, Delta-Sigma ADC With I2C Interface datasheet (Rev. A) PDF | HTML 2018/10/25
應用說明 A Simple, Java-Based CRC Calculator PDF | HTML 2026/3/4
應用說明 Temperature Monitor for Power Modules and Power Electronic Parts 2025/7/30
Application brief Leak Detection, Flow, and Pressure Monitoring in Liquid-Cooled Server Cards and Coolant Distribution Units PDF | HTML 2024/10/9
應用說明 K-type thermocouple measurement circuit with precision ADC (Rev. A) PDF | HTML 2024/9/20
應用說明 Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 2024/3/18
應用說明 A Basic Guide to Bridge Measurements (Rev. A) PDF | HTML 2024/3/13
應用說明 A Basic Guide to RTD Measurements (Rev. A) PDF | HTML 2023/3/29
應用說明 Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023/3/29
應用說明 A Basic Guide to Thermocouple Measurements (Rev. A) PDF | HTML 2023/3/29
應用說明 ADS124S08 3-Wire PT100 RTD Measurement Circuit w/ Low-Side Reference and 1 IDAC (Rev. B) 2021/9/9
應用說明 Communication Methods for Data Integrity Using Delta-Sigma Data Converters (Rev. A) PDF | HTML 2021/8/23
應用說明 RTD Wire-Break Detection Using Precision Delta-Sigma ADCs PDF | HTML 2021/2/18
電子書 Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020/6/19
Application brief Low-Cost, Single-Chip, Diff Temp Measurement Solution Using Delta-Sigma ADCs (Rev. A) 2018/5/4

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS112C04EVM — ADS112C04 評估模組

ADS112C04 評估模組 (EVM) 是用於評估 ADS112C04 類比轉數位轉換器 (ADC) 的平台。ADS112C04 為一配備 UART 介面的 16 位元、2-kSPS、4 通道、低功耗 ΔΣ ADC，適用於感測器量測和製程控制應用。ADS112C04 也包括整合式振盪器、參考及使用 PGA 精準測量廣泛的輸入訊號。使用 ADS112C04EVM 和 ΔΣ ADC EvaluaTIon 軟體 (DELTASIGMAEVAL-GUI) 以縮短原型開發時間，加快產品上市速度。

使用指南: PDF
支援產品和硬體
應用軟體及架構

ADC-TEMP-SENSOR-FW — Temperature-sensor firmware source files

這款溫度感測器線性化韌體提供軟體常式來測量和線性化最常用的溫度感測器，包括電阻溫度偵測器 (RTD)、熱電偶、熱敏電阻 (NTC、PTC 等) 與類比溫度感測器。

此軟體包含類比轉數位轉換器 (ADC) 硬體抽象層，可在 ADC 與微處理器 (MCU) 之間進行通訊，並且可將感測器資料轉換並線性化為溫度值的感測器 API，以及展示如何藉由原始碼來使用感測器 (精確 ADC 及 MCU) 讀取溫度的範例。

支援產品和硬體
支援軟體

ADS122C04-C-EXAMPLE-CODE — ADS122C04 example C code

Expedite your embedded design using this example C code for the ADS122C04 product family
支援產品和硬體
模擬型號

ADS112C04 IBIS Model

SBAM381.ZIP (37 KB) - IBIS 模型
支援產品和硬體
計算工具

ADC-RTD-CONFIG-CALC — RTD Configuration Calculator for Precision ADCs

此電阻溫度偵測器 (RTD) 配置計算機是一套 Microsoft® Excel 工具，可協助使用者為 RTD 應用找出系統解決方案。預設顯示兩線、三線及四線 RTD 配置，並配備適用三線 RTD 的高側或低側參考電阻，及一或兩個整合式數位轉類比轉換器 (IDAC) 電流來源的選項。

此外，計算機支援各種 RTD 類型和精確類比轉數位轉換器 (ADC)。使用此計算器為每個組態選擇參考及偏壓電阻值、IDAC 電流及增益設定。此外，計算機也提供全誤差的一階近似，以幫助使用者找出系統中最大的誤差來源。

支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 16 Ultra Librarian
WQFN (RTE) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片