首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS1285

現行

適用於地震與近地太空探索的 32 位元、高解析度、雙通道 ΔΣ ADC

立即訂購
產品規格表

ADS1285

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 32 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.5 Input voltage range (min) (V) -2.5 Features GPIO, PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 8 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 SNR (dB) 134 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 32 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.5 Input voltage range (min) (V) -2.5 Features GPIO, PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 8 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.5 SNR (dB) 134 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
VQFN (RHB) 32 25 mm² 5 x 5
  • Selectable resolution-power modes:
    • Dynamic range: 134dB at 2ms, 11.5mW
    • Dynamic range: 129dB at 2ms, 4.8mW
  • Flexible digital filter:
    • Selectable sinc + FIR + IIR
    • Linear or minimum phase
    • High-pass filter
  • THD: < –120dB
  • CMRR: 125dB
  • Data rates: 125 SPS to 4000 SPS
  • Programmable gains: 1 to 64
  • PGA bypass option
  • SYNC input
  • Clock error compensation
  • Two-channel multiplexer
  • Offset and gain calibration
  • General-purpose digital I/Os
  • Analog supply operation: 5V, 3.3V, or ±2.5V
  • Reference voltage options: 5V, 4.096V, or 2.5V
  • Selectable resolution-power modes:
    • Dynamic range: 134dB at 2ms, 11.5mW
    • Dynamic range: 129dB at 2ms, 4.8mW
  • Flexible digital filter:
    • Selectable sinc + FIR + IIR
    • Linear or minimum phase
    • High-pass filter
  • THD: < –120dB
  • CMRR: 125dB
  • Data rates: 125 SPS to 4000 SPS
  • Programmable gains: 1 to 64
  • PGA bypass option
  • SYNC input
  • Clock error compensation
  • Two-channel multiplexer
  • Offset and gain calibration
  • General-purpose digital I/Os
  • Analog supply operation: 5V, 3.3V, or ±2.5V
  • Reference voltage options: 5V, 4.096V, or 2.5V

The ADS1285 is a 32-bit, low-power, analog-to-digital converter (ADC), with a programmable gain amplifier (PGA) and a finite impulse response (FIR) filter. The ADC is designed for the demanding needs of seismology equipment requiring low-noise precision digitization and extended battery run time.

The low-noise PGA allows direct connection of geophones and transformer-coupled hydrophones without the need of an external amplifier.

The ADC incorporates a high-resolution, delta-sigma (ΔΣ) modulator and a FIR filter with programmable phase response. The high-pass filter removes dc and low-frequency content from the signal. Clock frequency error is compensated by the sample rate converter with 7ppb resolution.

Choice of power modes optimize dynamic range verses power consumption. Power consumption is further reduced by PGA bypass operation.

The ADC is available in a compact 5mm × 5mm VQFN package and is fully specified over the –40°C to +85°C ambient temperature range.

The ADS1285 is a 32-bit, low-power, analog-to-digital converter (ADC), with a programmable gain amplifier (PGA) and a finite impulse response (FIR) filter. The ADC is designed for the demanding needs of seismology equipment requiring low-noise precision digitization and extended battery run time.

The low-noise PGA allows direct connection of geophones and transformer-coupled hydrophones without the need of an external amplifier.

The ADC incorporates a high-resolution, delta-sigma (ΔΣ) modulator and a FIR filter with programmable phase response. The high-pass filter removes dc and low-frequency content from the signal. Clock frequency error is compensated by the sample rate converter with 7ppb resolution.

Choice of power modes optimize dynamic range verses power consumption. Power consumption is further reduced by PGA bypass operation.

The ADC is available in a compact 5mm × 5mm VQFN package and is fully specified over the –40°C to +85°C ambient temperature range.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
ADS1288 現行 適用於地震與近地太空探索的低功率 32 位元雙通道 ΔΣ ADC Lower dynamic range

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet ADS1285 32-Bit, Delta-Sigma ADC for Seismic Applications datasheet (Rev. B) PDF | HTML 2025年 11月 12日
Application note Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023年 3月 29日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS1285EVM-PDK — 適用於 32 位元、高解析度、二通道 delta-sigma ADC 的 ADS1285 性能展示套件

ADS1285 評估模組 (EVM) 性能展示套件 (PDK) 是一款結合 ADS1285EVM-PDK 和精確主機介面 (PHI) 控制器板的平台。PHI 控制器板可讓 ADS1285EVM 透過 USB 埠連接電腦，並與設計用於完全評估 ADS1285 的軟體連接。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

ADS1285 IBIS Model

SBAM496.IBS (299 KB) - IBIS Model
下載
計算工具

ADC-DESIGN-CALC — Online design calculator tool for TI Precision ADCs

ADC-DESIGN-CALC is an online resource with multiple ADC calculator tools (such as Digital Filter Response, Code-to-Voltage, CMR, CRC, etc.) for TI Precision ADCs.
支援產品和硬體

支援產品和硬體
啟動
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體

支援產品和硬體
啟動
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片