ADS1148
- Programmable Data Rates Up to 2 kSPS
- Single-Cycle Settling for All Data Rates
- Simultaneous 50-Hz and 60-Hz Rejection at
20 SPS - Analog Multiplexer With 8 (ADS1148) and
4 (ADS1147) Independently Selectable Inputs - Programmable Gain: 1 V/V to 128 V/V
- Dual-Matched Programmable Excitation Current Sources
- Low-Drift Internal 2.048-V Reference
- Sensor Burnout Detection
- 4 or 8 General-Purpose I/Os (ADS1147 and ADS1148)
- Internal Temperature Sensor
- Power Supply and VREF Monitoring (ADS1147 and ADS1148)
- Self and System Calibration
- SPI™-Compatible Serial Interface
- Analog Supply: Unipolar (2.7 V to 5.25 V) or Bipolar (±2.5 V)
- Digital Supply: 2.7 V to 5.25 V
The ADS1146, ADS1147, and ADS1148 devices are precision, 16-bit analog-to-digital converters (ADCs) that include many integrated features to reduce system cost and component count for sensor measurement applications. The devices feature a low-noise, programmable gain amplifier (PGA), a precision delta-sigma (ΔΣ) ADC with a single-cycle settling digital filter, and an internal oscillator. The ADS1147 and ADS1148 devices also provide a built-in, low-drift voltage reference, and two matched programmable excitation current sources (IDACs).
An input multiplexer supports four differential inputs for the ADS1148, two for the ADS1147, and one for the ADS1146. In addition, the multiplexer integrates sensor burn-out detection, voltage bias for thermocouples, system monitoring, and general purpose digital I/Os (ADS1147 and ADS1148). The PGA provides selectable gains up to 128 V/V. These features provide a complete front-end solution for temperature sensor measurement applications including thermocouples, thermistors, and resistance temperature detectors (RTDs) and other small signal measurements including resistive bridge sensors. The digital filter settles in a single cycle to support fast channel cycling when using the input multiplexer and provides data rates up to 2 kSPS. For data rates of 20 SPS or less, both 50-Hz and 60-Hz interference are rejected by the filter.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS1148EVM-PDK — 適用於具有感測器量測 PGA 之 16 位元 2-kSPS ADC 的 ADS1148 性能展示套件
ADS1148 評估模組 (EVM) 性能展示套件 (PDK) 是一款評估 ADS1148 八通道、16 位元、高精密 delta-sigma (ΔΣ) 類比數位轉換器 (ADC) 的平台。EVM 採用可輕鬆接受各種類型類比溫度感測器的設計,包括電阻溫度偵測器 (RTD)、熱電偶和熱敏電阻。
ADS1148EVM-PDK 包含 ADS1148 EVM、精確 ADC 主機板 (PAMBoard),以及隨附的電腦軟體,其可讓使用者透過通用序列匯流排 (USB) 與 ADC 通訊、擷取資料,以及執行資料分析。
SBAC144 — ADS1x4x Firmware Example Code
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面,列出各種常見計算,從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外,此計算機還與類比工程師口袋參考中描述的概念相得益彰。
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-00110 — 適用於使用 RTD 的智慧電網應用中的溫度感測的類比前端 (AFE)
此參考設計允許透過一個 ADC 連接多達 4 個電阻溫度偵測器 (RTD) ,以確保解決方案兼具精巧與模組化特色。透過 SPI 介面負責 ADC 與處理器的通訊。若該應用領域需要 8 個 RTD,只要再連結一個同類模組即可。此解決方案具備彈性,可處理 2 線、3 線或 4 線類型 RTD。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
| TSSOP (PW) | 28 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。