首頁 放大器 運算放大器 (op amps) 音訊運算放大器
首頁
放大器
運算放大器 (op amps)
音訊運算放大器

OPA1612

現行

具 1.1nV/√ Hz 雜訊、低 THD 和精密的 SoundPlus™ 音訊運算放大器

立即訂購
產品規格表

OPA1612

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 40 Slew rate (typ) (V/µs) 27 Rail-to-rail Out Vos (offset voltage at 25°C) (max) (mV) 0.5 Iq per channel (typ) (mA) 3.6 Vn at 1 kHz (typ) (nV√Hz) 1.1 Features Burr-Brown™ Audio, Premium Sound, Small Size THD + N at 1 kHz (typ) (%) 0.000015 Rating Catalog Operating temperature range (°C) -40 to 85 Iout (typ) (A) 0.055 Product type Ultimate Architecture Bipolar CMRR (typ) (dB) 120 Input bias current (max) (pA) 250000
Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 40 Slew rate (typ) (V/µs) 27 Rail-to-rail Out Vos (offset voltage at 25°C) (max) (mV) 0.5 Iq per channel (typ) (mA) 3.6 Vn at 1 kHz (typ) (nV√Hz) 1.1 Features Burr-Brown™ Audio, Premium Sound, Small Size THD + N at 1 kHz (typ) (%) 0.000015 Rating Catalog Operating temperature range (°C) -40 to 85 Iout (typ) (A) 0.055 Product type Ultimate Architecture Bipolar CMRR (typ) (dB) 120 Input bias current (max) (pA) 250000
SOIC (D) 8 29.4 mm² 4.9 x 6 WSON (DRG) 8 9 mm² 3 x 3
  • Superior Sound Quality
  • Ultralow Noise: 1.1 nV/√Hz at 1 kHz
  • Ultralow Distortion:
    0.000015% at 1 kHz
  • High Slew Rate: 27 V/μs
  • Wide Bandwidth: 40 MHz (G = +1)
  • High Open-Loop Gain: 130 dB
  • Unity Gain Stable
  • Low Quiescent Current:
    3.6 mA per Channel
  • Rail-to-Rail Output
  • Wide Supply Range: ±2.25 V to ±18 V
  • Single and Dual Versions Available
  • Superior Sound Quality
  • Ultralow Noise: 1.1 nV/√Hz at 1 kHz
  • Ultralow Distortion:
    0.000015% at 1 kHz
  • High Slew Rate: 27 V/μs
  • Wide Bandwidth: 40 MHz (G = +1)
  • High Open-Loop Gain: 130 dB
  • Unity Gain Stable
  • Low Quiescent Current:
    3.6 mA per Channel
  • Rail-to-Rail Output
  • Wide Supply Range: ±2.25 V to ±18 V
  • Single and Dual Versions Available

The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve very low 1.1-nV/√Hz noise density with an ultralow distortion of 0.000015% at 1 kHz. The OPA1611 and OPA1612 offer rail-to-rail output swing to within 600 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range. These devices also have a high output drive capability of ±30 mA.

These devices operate over a very wide supply range of ±2.25 V to ±18 V, on only 3.6 mA of supply current per channel. The OPA1611 and OPA1612 op amps are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.

The dual version features completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.

Both the OPA1611 and OPA1612 are available in SOIC-8 packages and the OPA1612 is available in SON-8. These devices are specified from –40°C to +85°C.

The OPA1611 (single) and OPA1612 (dual) bipolar-input operational amplifiers achieve very low 1.1-nV/√Hz noise density with an ultralow distortion of 0.000015% at 1 kHz. The OPA1611 and OPA1612 offer rail-to-rail output swing to within 600 mV with a 2-kΩ load, which increases headroom and maximizes dynamic range. These devices also have a high output drive capability of ±30 mA.

These devices operate over a very wide supply range of ±2.25 V to ±18 V, on only 3.6 mA of supply current per channel. The OPA1611 and OPA1612 op amps are unity-gain stable and provide excellent dynamic behavior over a wide range of load conditions.

The dual version features completely independent circuitry for lowest crosstalk and freedom from interactions between channels, even when overdriven or overloaded.

Both the OPA1611 and OPA1612 are available in SOIC-8 packages and the OPA1612 is available in SON-8. These devices are specified from –40°C to +85°C.
filter 尋找其它 音訊運算放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
INA1620 現行 具整合式薄膜電阻器和 EMI 濾波的高保真音訊運算放大器 High-fidelity audio operational amplifier with integrated thin-film resistors and EMI filtering

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
重要文件 類型 標題 格式選項 日期
* Data sheet OPA161x SoundPlus High-Performance, Bipolar-Input Audio Operational Amplifiers datasheet (Rev. C) PDF | HTML 2014年 8月 27日
Circuit design Band pass filtered inverting attenuator circuit (Rev. B) PDF | HTML 2024年 10月 16日
Circuit design Current-to-voltage converter circuit for audio DACs (Rev. A) PDF | HTML 2024年 9月 19日
Application note How to Measure Total Harmonic Distortion of an Op-Amp and THD + N Fundamentals PDF | HTML 2023年 11月 9日
Application brief Understanding Op Amp Noise in Audio Circuits PDF | HTML 2021年 6月 14日
Application note HiFi Audio Circuit Design 2017年 8月 23日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
Analog Design Journal Analog Applications Journal 2Q 2015 2015年 4月 28日
Analog Design Journal Stabilizing difference amplifiers for headphone applications 2015年 4月 28日
Analog Design Journal Reducing distortion from CMOS analog switches 2015年 1月 29日
Analog Design Journal Distortion and source impedance in JFET-input op amps 2014年 10月 24日
E-book Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. D) PDF | HTML 2014年 9月 30日
Application note Compensate Transimpedance Amplifiers Intuitively (Rev. A) 2005年 3月 30日
Application note Feedback Plots Define Op Amp AC Performance 2000年 9月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

  • D (SOIC-8 和 SOIC-14)
  • PW (TSSOP-14)
  • DGK (VSSOP-8)
  • DBV (SOT23-5 和 SOT23-6)
  • DCK (SC70-5 和 SC70-6)
使用指南: PDF | HTML
View Options
模擬型號

OPA161x PSpice Model (Rev. G)

SBOM396G.ZIP (27 KB) - PSpice Model
下載
模擬型號

OPA161x TINA-TI Reference Design (Rev. F)

SBOM398F.TSC (302 KB) - TINA-TI Reference Design
下載
模擬型號

OPA161x TINA-TI SPICE Model (Rev. F)

SBOM397F.ZIP (11 KB) - TINA-TI Spice Model
下載
模擬型號

SBAA333 Companion Simulations

SBAM413.ZIP (44 KB) - TINA-TI Reference Design
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
設計工具

CIRCUIT060050 — 帶通濾波反向衰減器電路

此可調帶通衰減器可在 10 Hz 至 100 kHz 頻率範圍內降低 –40 dB 的訊號電平。並且允許獨立控制 DC 輸出位準。針對此設計，選擇了通帶外部的極頻率，將指定頻寬範圍內的衰減降到最低。
View Options
設計工具

SBOC503 — Simulation for Band Pass Filtered Inverting Attenuator Circuit

支援產品和硬體

支援產品和硬體
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIPD177 — 適用於電流輸出音訊 DAC 的高保真耳機放大器參考設計

This TI Precision Verified Design circuit converts the differential current output of audio DACs to a single-ended voltage capable of driving low impedance headphones. This design is capable of meeting the high-fidelity performance levels currently being popularized in cell phones and portable (...)
使用指南: PDF
電路圖: PDF
參考設計

PMP9781 — 適用於可攜式音訊應用的小型、高效率分裂軌電源供應參考設計

Differential Headphone amplifiers require positive and negative voltages. In this reference design, both voltages are generated from a single input voltage with an all integrated split-rail converter. It only requires one inductor and a minimal amount of external components to achieve a high (...)
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
WSON (DRG) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片