首頁 放大器 運算放大器 (op amps) 功率運算放大器
首頁
放大器
運算放大器 (op amps)
功率運算放大器

OPA564-Q1

現行

車用 1.5A、24V、17MHz 功率運算放大器

立即訂購
產品規格表

OPA564-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 24 Iout (typ) (A) 1.5 GBW (typ) (MHz) 17 Slew rate (typ) (V/µs) 40 Vos (offset voltage at 25°C) (max) (mV) 20 Offset drift (typ) (µV/°C) 10 Iq per channel (typ) (mA) 39 Features Adj Current Limit, Shutdown Rating Automotive Operating temperature range (°C) -40 to 125 Input bias current (max) (pA) 100 CMRR (typ) (dB) 80 Rail-to-rail In to V- Architecture FET
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 24 Iout (typ) (A) 1.5 GBW (typ) (MHz) 17 Slew rate (typ) (V/µs) 40 Vos (offset voltage at 25°C) (max) (mV) 20 Offset drift (typ) (µV/°C) 10 Iq per channel (typ) (mA) 39 Features Adj Current Limit, Shutdown Rating Automotive Operating temperature range (°C) -40 to 125 Input bias current (max) (pA) 100 CMRR (typ) (dB) 80 Rail-to-rail In to V- Architecture FET
HSOIC (DWP) 20 133.444125 mm² 12.825 x 10.405
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • High output current: 1.5A
  • Wide power-supply range:
    • Single supply: 7V to 24V
    • Dual supply: ±3.5V to ±12V
  • Large output swing: 20VPP at 1.5A
  • Fully protected:
    • Thermal shutdown
    • Adjustable current limit
  • Diagnostic flags:
    • Overcurrent
    • Thermal shutdown
  • Output enable and shutdown (E/S) control
  • High speed:
    • Gain-bandwidth product: 17MHz
    • Full-power bandwidth at 10VPP: 1.3MHz
    • Slew rate: 40V/µs
  • Diode for junction temperature monitoring
  • HSOIC-20 PowerPAD™ integrated circuit package
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • High output current: 1.5A
  • Wide power-supply range:
    • Single supply: 7V to 24V
    • Dual supply: ±3.5V to ±12V
  • Large output swing: 20VPP at 1.5A
  • Fully protected:
    • Thermal shutdown
    • Adjustable current limit
  • Diagnostic flags:
    • Overcurrent
    • Thermal shutdown
  • Output enable and shutdown (E/S) control
  • High speed:
    • Gain-bandwidth product: 17MHz
    • Full-power bandwidth at 10VPP: 1.3MHz
    • Slew rate: 40V/µs
  • Diode for junction temperature monitoring
  • HSOIC-20 PowerPAD™ integrated circuit package

The OPA564-Q1 is a low-cost, high-current op amp that is an excellent choice for driving up to 1.5A into reactive loads. The high slew rate provides 1.3MHz of full-power bandwidth and excellent linearity. These monolithic integrated circuits provide high reliability in demanding powerline-communications and motor-control applications.

The OPA564-Q1 operates from a single supply of 7V to 24V, or dual power supplies of ±3.5V to ±12V. In single-supply operation, the input common-mode range extends to the negative supply. At maximum output current, a wide output swing provides a 20VPP (IOUT = 1.5A) capability with a nominal 24V supply.

The OPA564-Q1 is internally protected against overtemperature conditions and current overloads. This device provides an accurate, user-selected current limit. Two flag outputs are provided: one indicates current limit and the other shows a thermal overtemperature condition. The device also has an enable and shutdown (E/S) pin that can be forced low to shut down the output, effectively disconnecting the load.

The OPA564-Q1 is housed in a thermally enhanced, surface-mount PowerPAD integrated circuit package (HSOIC-20).

The OPA564-Q1 is a low-cost, high-current op amp that is an excellent choice for driving up to 1.5A into reactive loads. The high slew rate provides 1.3MHz of full-power bandwidth and excellent linearity. These monolithic integrated circuits provide high reliability in demanding powerline-communications and motor-control applications.

The OPA564-Q1 operates from a single supply of 7V to 24V, or dual power supplies of ±3.5V to ±12V. In single-supply operation, the input common-mode range extends to the negative supply. At maximum output current, a wide output swing provides a 20VPP (IOUT = 1.5A) capability with a nominal 24V supply.

The OPA564-Q1 is internally protected against overtemperature conditions and current overloads. This device provides an accurate, user-selected current limit. Two flag outputs are provided: one indicates current limit and the other shows a thermal overtemperature condition. The device also has an enable and shutdown (E/S) pin that can be forced low to shut down the output, effectively disconnecting the load.

The OPA564-Q1 is housed in a thermally enhanced, surface-mount PowerPAD integrated circuit package (HSOIC-20).
filter 尋找其它 功率運算放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
ALM2403-Q1 現行 適用於解析器應用且具有低失真的汽車雙通道、高電壓功率運算放大器 Dual-channel resolver driver with wider voltage range and bandwidth

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet 1.5A, 24V, 17MHz Power Operational Amplifier datasheet (Rev. A) PDF | HTML 2024年 2月 7日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
E-book Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. D) PDF | HTML 2014年 9月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

OPA564 TINA-TI Spice Model (Rev. A)

SBOM402A.ZIP (11 KB) - TINA-TI Spice Model
下載
模擬型號

OPA564 TINA-TI Transient Reference Design (Rev. A)

SBOM403A.TSC (139 KB) - TINA-TI Reference Design
下載
模擬型號

OPA564 TINA-TI Transient and AC Reference Design (Rev. A)

SBOM404A.TSC (143 KB) - TINA-TI Reference Design
下載
模擬型號

OPA564 and OPA564-Q1 PSpice Model (Rev. B)

SBOM405B.ZIP (35 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HSOIC (DWP) 20 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片