OPA348-Q1

現行

汽車級、單路、5.5-V、1-MHz、低靜態電流 (45-μA)、RRIO 運算放大器

立即訂購

產品規格表

document-pdfAcrobat OPAx348-Q1 1-MHz 45-µA CMOS Rail-to-Rail Operational Amplifier datasheet (Rev. C) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

具備升級功能，可直接投入使用替代所比較的裝置。

TLV9001-Q1

現行

車用單通道、5.5-V、1-MHz、軌至軌輸入和輸出運算放大器 Wider supply range (1.8 V to 5.5 V), faster slew rate (2 V/us), lower offset voltage (1.6 mV), lower noise (30 nV/√Hz), higher output current (40 mA)

OPA348-Q1

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.1

Rail-to-rail

In, Out

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

0.5

Vos (offset voltage at 25°C) (max) (mV)

5

Iq per channel (typ) (mA)

0.045

Vn at 1 kHz (typ) (nV√Hz)

35

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

4

Input bias current (max) (pA)

10

CMRR (typ) (dB)

82

Iout (typ) (A)

0.01

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.018

Output swing headroom (to positive supply) (typ) (V)

-0.018

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.1

Rail-to-rail

In, Out

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

0.5

Vos (offset voltage at 25°C) (max) (mV)

5

Iq per channel (typ) (mA)

0.045

Vn at 1 kHz (typ) (nV√Hz)

35

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

4

Input bias current (max) (pA)

10

CMRR (typ) (dB)

82

Iout (typ) (A)

0.01

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

0.2

Output swing headroom (to negative supply) (typ) (V)

0.018

Output swing headroom (to positive supply) (typ) (V)

-0.018

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to
  +125°C Ambient Operating Temperature
  Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
Low Quiescent Current (I_Q): 45 µA (Typ)
Low Cost
Rail-to-Rail Input and Output
Single Supply: 2.1 V to 5.5 V
Input Bias Current: 0.5 pA (Typ)
High Speed: Power With Bandwidth: 1 MHz
APPLICATIONS
- Portable Equipment
- Battery-Powered Equipment
- Smoke Alarms
- CO Detectors
- HEV/EV and Power Train
- Infotainment and Cluster
- Medical Instrumentation

All other trademarks are the property of their respective owners

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to
  +125°C Ambient Operating Temperature
  Range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
Low Quiescent Current (I_Q): 45 µA (Typ)
Low Cost
Rail-to-Rail Input and Output
Single Supply: 2.1 V to 5.5 V
Input Bias Current: 0.5 pA (Typ)
High Speed: Power With Bandwidth: 1 MHz
APPLICATIONS
- Portable Equipment
- Battery-Powered Equipment
- Smoke Alarms
- CO Detectors
- HEV/EV and Power Train
- Infotainment and Cluster
- Medical Instrumentation

All other trademarks are the property of their respective owners

The OPAx348-Q1 series of devices are single-supply, low-power CMOS operational amplifiers. Featuring an extended bandwidth of 1 MHz and a supply current of 45 µA, the OPAx348-Q1 family of devices is useful for low-power applications on single supplies of 2.1 V to 5.5 V.

Low supply current of 45 µA and an input bias current of 0.5 pA make the OPAx348-Q1 family of devices an optimal candidate for low-power, high-impedance applications such as smoke detectors and other sensors.

The OPA348-Q1 device is available in both the SOT23-5 (DBV) and the SOIC (D) packages. The OPA2348-Q1 device is available in the SOIC-8 (D) package. The OPA4348-Q1 device is available in the TSSOP-14 (PW) package. The automotive temperature range of –40°C to +125°C over all supply voltages offers additional design flexibility.

The OPAx348-Q1 series of devices are single-supply, low-power CMOS operational amplifiers. Featuring an extended bandwidth of 1 MHz and a supply current of 45 µA, the OPAx348-Q1 family of devices is useful for low-power applications on single supplies of 2.1 V to 5.5 V.

Low supply current of 45 µA and an input bias current of 0.5 pA make the OPAx348-Q1 family of devices an optimal candidate for low-power, high-impedance applications such as smoke detectors and other sensors.

The OPA348-Q1 device is available in both the SOT23-5 (DBV) and the SOIC (D) packages. The OPA2348-Q1 device is available in the SOIC-8 (D) package. The OPA4348-Q1 device is available in the TSSOP-14 (PW) package. The automotive temperature range of –40°C to +125°C over all supply voltages offers additional design flexibility.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 4

重要文件	類型	標題	格式選項	日期
*	資料表	OPAx348-Q1 1-MHz 45-µA CMOS Rail-to-Rail Operational Amplifier datasheet (Rev. C)	PDF \| HTML	2016/1/15
	技術文章	Lighting up automotive displays with a transimpedance configuration	PDF \| HTML	2018/8/1
	電子書	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	2017/3/28
	電子書	Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. D)	PDF \| HTML	2014/9/30

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

D (SOIC-8 和 SOIC-14)
PW (TSSOP-14)
DGK (VSSOP-8)
DBV (SOT23-5 和 SOT23-6)
DCK (SC70-5 和 SC70-6)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

開發板

DIP-ADAPTER-EVM — DIP 轉接器評估模組

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

開發板

DIYAMP-EVM — 通用自製 (DIY) 放大器電路評估模組

DIYAMP-EVM 是一系列評估模組 (EVM)，提供工程師與自組愛好者 (DIYers) 實作型放大器電路，協助快速驗證設計概念並模擬結果。提供三種業界標準封裝（SC70、SOT-23 和 SOIC）與 12 種常見放大器配置，支援單電源與雙電源架構的放大器、濾波器、穩定補償與比較器應用。

DIYAMP-EVM 可快速製作電路原型，並採用常見的 0805 或 0603 表面裝載元件。透過多種組合方式，此 EVM 可建立從簡單放大器電路到複雜訊號鏈的各種評估電路。此 EVM 支援模擬板、超微型 A 版 (SMA)、接頭和有線介面連接方式，並與大多數類比數位轉換器 (ADC) (...)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

模擬型號