首頁 放大器 運算放大器 (op amps) 高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

OPA859-Q1

現行

車用 1.8-GHz 均一增益頻寬、3.3-nV/√Hz、FET 輸入放大器

立即訂購
產品規格表

OPA859-Q1

現行
產品規格表 立即訂購

產品詳細資料

Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3.3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 GBW (typ) (MHz) 900 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1150 Vn at flatband (typ) (nV√Hz) 3.3 Vn at 1 kHz (typ) (nV√Hz) 12.1 Iq per channel (typ) (mA) 20.5 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail No Features Shutdown Rating Automotive Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 84 Input bias current (max) (pA) 5 Offset drift (typ) (µV/°C) 0.2 Iout (typ) (mA) 76 2nd harmonic (dBc) 90 3rd harmonic (dBc) 86 Frequency of harmonic distortion measurement (MHz) 10
Architecture FET / CMOS Input, Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3.3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 GBW (typ) (MHz) 900 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 1150 Vn at flatband (typ) (nV√Hz) 3.3 Vn at 1 kHz (typ) (nV√Hz) 12.1 Iq per channel (typ) (mA) 20.5 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail No Features Shutdown Rating Automotive Operating temperature range (°C) -40 to 125 CMRR (typ) (dB) 84 Input bias current (max) (pA) 5 Offset drift (typ) (µV/°C) 0.2 Iout (typ) (mA) 76 2nd harmonic (dBc) 90 3rd harmonic (dBc) 86 Frequency of harmonic distortion measurement (MHz) 10
WSON (DSG) 8 4 mm² (2 mm × 2 mm)
  • AEC-Q100 Qualified for Automotive Applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • High Unity-Gain Bandwidth: 1.8 GHz
  • Gain Bandwidth Product: 900 MHz
  • Ultra-Low Bias Current MOSFET Inputs: 10 pA
  • Low Input Voltage Noise: 3.3 nV/√Hz
  • Slew Rate: 1150 V/µs
  • Low Input Capacitance:
    • Common-Mode: 0.6 pF
    • Differential: 0.2 pF
  • Wide Input Common-Mode Range:
    • 1.4 V from Positive Supply
    • Includes Negative Supply
  • 2.5 VPP Output Swing in TIA Configuration
  • Supply Voltage Range: 3.3 V to 5.25 V
  • Quiescent Current: 20.5 mA
  • Package: 8-Pin WSON
  • Temperature Range: –40°C to +125°C
  • AEC-Q100 Qualified for Automotive Applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • High Unity-Gain Bandwidth: 1.8 GHz
  • Gain Bandwidth Product: 900 MHz
  • Ultra-Low Bias Current MOSFET Inputs: 10 pA
  • Low Input Voltage Noise: 3.3 nV/√Hz
  • Slew Rate: 1150 V/µs
  • Low Input Capacitance:
    • Common-Mode: 0.6 pF
    • Differential: 0.2 pF
  • Wide Input Common-Mode Range:
    • 1.4 V from Positive Supply
    • Includes Negative Supply
  • 2.5 VPP Output Swing in TIA Configuration
  • Supply Voltage Range: 3.3 V to 5.25 V
  • Quiescent Current: 20.5 mA
  • Package: 8-Pin WSON
  • Temperature Range: –40°C to +125°C

The OPA859-Q1 is a wideband, low-noise operational amplifier with CMOS inputs for wideband transimpedance and voltage amplifier applications. When the device is configured as a transimpedance amplifier (TIA), the 0.9-GHz gain bandwidth product (GBWP) enables high closed-loop bandwidths in low-capacitance photodiode applications.

The graph below shows the bandwidth and noise performance of the OPA859-Q1 as a function of the photodiode capacitance when the amplifier is configured as a TIA. The total noise is calculated along a bandwidth range extending from DC to the calculated frequency (f) on the left scale. The OPA859-Q1 package has a feedback pin (FB) that simplifies the feedback network connection between the input and the output.

The OPA859-Q1 is optimized to operate in optical time-of-flight (ToF) systems where the OPA859-Q1 is used with time-to-digital converters, such as the TDC7201. Use the OPA859-Q1 to drive a high-speed analog-to-digital converter (ADC) in high-resolution LIDAR systems with a differential output amplifier, such as the THS4541-Q1.

The OPA859-Q1 is a wideband, low-noise operational amplifier with CMOS inputs for wideband transimpedance and voltage amplifier applications. When the device is configured as a transimpedance amplifier (TIA), the 0.9-GHz gain bandwidth product (GBWP) enables high closed-loop bandwidths in low-capacitance photodiode applications.

The graph below shows the bandwidth and noise performance of the OPA859-Q1 as a function of the photodiode capacitance when the amplifier is configured as a TIA. The total noise is calculated along a bandwidth range extending from DC to the calculated frequency (f) on the left scale. The OPA859-Q1 package has a feedback pin (FB) that simplifies the feedback network connection between the input and the output.

The OPA859-Q1 is optimized to operate in optical time-of-flight (ToF) systems where the OPA859-Q1 is used with time-to-digital converters, such as the TDC7201. Use the OPA859-Q1 to drive a high-speed analog-to-digital converter (ADC) in high-resolution LIDAR systems with a differential output amplifier, such as the THS4541-Q1.
filter 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
OPA855-Q1 現行 具有雙極輸入的車用 8-GHz 增益頻寬、補償不全的轉阻放大器 An amplifier that features a decompensated architecture, a higher 8-GHz bandwidth and a bipolar input to enable higher bandwidth systems.
OPA858-Q1 現行 具有 FET 輸入的車用 5.5-GHz 增益頻寬、補償不全的轉阻放大器 An amplifier that features a decompensated architecture, with a higher 5.5-GHz bandwidth and a FET input that enables higher bandwidth systems.
功能相似於所比較的產品。
LMH32401 現行 可編程增益差動輸出高速轉阻放大器 A transimpedance amplifier with programmable gain and ambient light cancelation for optical systems requiring a higher level of integration
OPA3S2859 現行 雙通道 900-MHz、2.2 nV/√Hz 可編程增益轉阻放大器 An automotive-qualified single-channel amp that has a similar FET input and 900-MHz bandwidth, but without integrated switches for configurable gain options

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 OPA859-Q1 1.8-GHz Unity-Gain Bandwidth, 3.3-nV/√Hz, FET Input Amplifier datasheet PDF | HTML 2021/2/5

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DEM-OPA-WSON8-EVM — 適用於 8 接腳 WSON (DSG) 封裝單通道運算放大器的未組裝評估模組

DEM-OPA-WSON8-EVM 是用於 DSG（8 接腳 WSON）封裝中單通道運算放大器的未組裝評估模組。此 EVM 專為高速性能規格而設計，與增益頻寬超過 1GHz 的放大器相容。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSG) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片