首頁 放大器 電流感測放大器 具整合式分流電阻器的數位電源監測器
首頁
放大器
電流感測放大器
具整合式分流電阻器的數位電源監測器
最新

INA701

現行

使用 5mΩ EZShunt™ 技術，並採用 WCSP 封裝的 40V 16 位元 I²C 輸出數位電源監控器

立即訂購
產品規格表

INA701

現行
產品規格表 立即訂購

產品詳細資料

Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.3 Continuous current (max) (A) 6.25 Input offset current (±) (max) (mA) 0.6 Input offset current drift (±) (typ) (µA/°C) 20 Gain error (%) 0.25 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.1 Digital interface I2C Resolution (Bits) 16 Features Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Monitor, Integrated Shunt, Low-side Capable, Ultra precise Rating Catalog Operating temperature range (°C) -40 to 125
Common-mode voltage (max) (V) 40 Common-mode voltage (min) (V) -0.3 Continuous current (max) (A) 6.25 Input offset current (±) (max) (mA) 0.6 Input offset current drift (±) (typ) (µA/°C) 20 Gain error (%) 0.25 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 2.7 Iq (max) (mA) 1.1 Digital interface I2C Resolution (Bits) 16 Features Alert Function, Bidirectional, Digital Temp Monitor, Integrated Power Monitor, Integrated Shunt, Low-side Capable, Ultra precise Rating Catalog Operating temperature range (°C) -40 to 125
POWERWCSP (YWF) 8 See data sheet
  • Low loss integrated shunt resistor
    • Internal resistance: 5mΩ at TA = 25°C
    • Current rating: ±6A at TA = 25°C
  • High-resolution, 16-bit delta-sigma ADC
    • Wide common-mode range: –0.3V to +40V
    • Reports current, bus voltage, power, internal temperature, energy, and charge
    • Programmable conversion time and averaging
  • Current monitoring accuracy:
    • Total Measurement Error: ±0.5% at 1A
    • Offset current: ±0.6mA (maximum)
    • Gain error: ±0.5% (maximum at 1A)
    • Gain error drift: ±50ppm/°C (maximum)
  • Power monitoring accuracy:
    • 0.85% accuracy at 1A
  • Energy and Charge accuracy:
    • 1.35% accuracy at 1A
  • Internal monitoring and fault detection
  • Precision oscillator: ±0.5% (maximum)
  • 2.94MHz High-Speed I2C interface with 4 pin-selectable addresses
  • Operates from a 2.7V to 5.5V supply
    • Operational current: 640µA (typical)
    • Shutdown current: 5µA (maximum)
  • Low loss integrated shunt resistor
    • Internal resistance: 5mΩ at TA = 25°C
    • Current rating: ±6A at TA = 25°C
  • High-resolution, 16-bit delta-sigma ADC
    • Wide common-mode range: –0.3V to +40V
    • Reports current, bus voltage, power, internal temperature, energy, and charge
    • Programmable conversion time and averaging
  • Current monitoring accuracy:
    • Total Measurement Error: ±0.5% at 1A
    • Offset current: ±0.6mA (maximum)
    • Gain error: ±0.5% (maximum at 1A)
    • Gain error drift: ±50ppm/°C (maximum)
  • Power monitoring accuracy:
    • 0.85% accuracy at 1A
  • Energy and Charge accuracy:
    • 1.35% accuracy at 1A
  • Internal monitoring and fault detection
  • Precision oscillator: ±0.5% (maximum)
  • 2.94MHz High-Speed I2C interface with 4 pin-selectable addresses
  • Operates from a 2.7V to 5.5V supply
    • Operational current: 640µA (typical)
    • Shutdown current: 5µA (maximum)

The INA701 is a digital power monitor with an integrated shunt resistor along with a 16-bit delta-sigma ADC specifically designed for current sensing applications. The device can measure full-scale currents up to ±6.225A, over the common-mode voltage range of –0.3V to +40V.

The INA701 reports current, bus voltage, die temperature, power, energy and charge accumulation with a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±3°C accurate over the junction temperature range.

The low offset and gain error drift of the INA701 allows use in systems that do not undergo temperature calibration during manufacturing.

The device features selectable ADC conversion times from 50µs to 4.12ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data and allows for optimization of overcurrent detection windows.

The device is available in a tiny PowerWCSP (DSBGA) package to minimize the solution size and maximize thermal performance.

The INA701 is a digital power monitor with an integrated shunt resistor along with a 16-bit delta-sigma ADC specifically designed for current sensing applications. The device can measure full-scale currents up to ±6.225A, over the common-mode voltage range of –0.3V to +40V.

The INA701 reports current, bus voltage, die temperature, power, energy and charge accumulation with a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±3°C accurate over the junction temperature range.

The low offset and gain error drift of the INA701 allows use in systems that do not undergo temperature calibration during manufacturing.

The device features selectable ADC conversion times from 50µs to 4.12ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data and allows for optimization of overcurrent detection windows.

The device is available in a tiny PowerWCSP (DSBGA) package to minimize the solution size and maximize thermal performance.
filter 尋找其它 具整合式分流電阻器的數位電源監測器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet INA701 40V, 16-Bit, I2 C Output Digital Power Monitor in WCSP With 5mΩ EZShunt Technology datasheet PDF | HTML 2025年 8月 4日
Certificate INA701EVM EU Declaration of Conformity (DoC) 2025年 5月 15日
Application note How EZShunt Technology Simplifies and Reduces Error in Shunt-Based Designs PDF | HTML 2024年 6月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA700-701EVM — INA700 或 INA701 評估模組

INA700-701EVM 是簡單易用的平台，可評估 INA700 或 INA701 裝置的主要功能與性能。評估模組 (EVM) 隨附圖形使用者介面 (GUI) 支援，可讀取和寫入裝置暫存器。
使用指南: PDF | HTML
View Options
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支援產品和硬體

支援產品和硬體
啟動 下載
計算工具

CS-AMPLIFIER-ERROR-TOOL — 電流感測放大器比較與錯誤工具

此 Excel 計算機提供兩個與五個標準電流感測放大器的比較，並提供包含各裝置基本參數的圖表。此計算機也會採用使用者的系統條件輸入，例如共模電壓、供應電壓、分流電阻器值與公差，然後在可調整電流範圍中繪製錯誤曲線。此外，計算機會根據計算的全刻度輸入電壓除以最大量測電流，輸出最大分流值 (mΩ)。
View Options
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
POWERWCSP (YWF) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片