首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC

ADS1231

現行

適用電阻橋感測器和秤重的 24 位元 80SPS、1 通道 ΔΣ ADC

立即訂購
產品規格表

ADS1231

現行
立即訂購

產品詳細資料

Resolution (Bits) 24 Sample rate (max) (ksps) 0.08 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Catalog Reference mode External Input voltage range (max) (V) 0.0195 Input voltage range (min) (V) 0 Features 50/60 Hz Rejection, Oscillator, PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.3 Digital supply (min) (V) 3 Digital supply (max) (V) 5.3
Resolution (Bits) 24 Sample rate (max) (ksps) 0.08 Number of input channels 1 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Rating Catalog Reference mode External Input voltage range (max) (V) 0.0195 Input voltage range (min) (V) 0 Features 50/60 Hz Rejection, Oscillator, PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 5 Analog supply voltage (min) (V) 3 Analog supply voltage (max) (V) 5.3 Digital supply (min) (V) 3 Digital supply (max) (V) 5.3
SOIC (D) 16 59.4 mm² (9.9 mm × 6 mm)
  • Complete Front-End for Bridge Sensors
  • Internal Amplifier, Gain of 128
  • Internal Oscillator
  • Low-Side Power Switch for Bridge Sensor
  • Low Noise: 35nVrms
  • Selectable Data Rates: 10SPS or 80SPS
  • Simultaneous 50Hz and 60Hz Rejection at 10SPS
  • Input EMI Filter
  • External Voltage Reference up to 5V for Ratiometric Measurements
  • Simple, Pin-Driven Control
  • Two-Wire Serial Digital Interface
  • Supply Range: 3V to 5.3V
  • Package: SOIC-16
  • Temperature Range: –40°C to +85°C
  • APPLICATIONS
    • Weigh Scales
    • Strain Gauges
    • Load Cells
    • Industrial Process Control

All other trademarks are the property of their respective owners
  • Complete Front-End for Bridge Sensors
  • Internal Amplifier, Gain of 128
  • Internal Oscillator
  • Low-Side Power Switch for Bridge Sensor
  • Low Noise: 35nVrms
  • Selectable Data Rates: 10SPS or 80SPS
  • Simultaneous 50Hz and 60Hz Rejection at 10SPS
  • Input EMI Filter
  • External Voltage Reference up to 5V for Ratiometric Measurements
  • Simple, Pin-Driven Control
  • Two-Wire Serial Digital Interface
  • Supply Range: 3V to 5.3V
  • Package: SOIC-16
  • Temperature Range: –40°C to +85°C
  • APPLICATIONS
    • Weigh Scales
    • Strain Gauges
    • Load Cells
    • Industrial Process Control

All other trademarks are the property of their respective owners

The ADS1231 is a precision, 24-bit analog-to-digital converter (ADC). With an onboard low-noise amplifier, onboard oscillator, precision third-order 24-bit delta-sigma () modulator, and bridge power switch, the ADS1231 provides a complete front-end solution for bridge sensor applications including weigh scales, strain gauges, and load cells.

The low-noise amplifier has a gain of 128, supporting a full-scale differential input of ±19.5mV. The ADC has 24-bit resolution and is comprised of a third-order modulator and fourth-order digital filter. Two data rates are supported: 10SPS (with both 50Hz and 60Hz rejection) and 80SPS. The ADS1231 can be put in a low-power standby mode or shut off completely in power-down mode.

The ADS1231 is controlled by dedicated pins; there are no digital registers to program. Data are output over an easily-isolated serial interface that connects directly to the MSP430 and other microcontrollers.

The ADS1231 is available in an SO-16 package and is specified from –40°C to +85°C.

The ADS1231 is a precision, 24-bit analog-to-digital converter (ADC). With an onboard low-noise amplifier, onboard oscillator, precision third-order 24-bit delta-sigma () modulator, and bridge power switch, the ADS1231 provides a complete front-end solution for bridge sensor applications including weigh scales, strain gauges, and load cells.

The low-noise amplifier has a gain of 128, supporting a full-scale differential input of ±19.5mV. The ADC has 24-bit resolution and is comprised of a third-order modulator and fourth-order digital filter. Two data rates are supported: 10SPS (with both 50Hz and 60Hz rejection) and 80SPS. The ADS1231 can be put in a low-power standby mode or shut off completely in power-down mode.

The ADS1231 is controlled by dedicated pins; there are no digital registers to program. Data are output over an easily-isolated serial interface that connects directly to the MSP430 and other microcontrollers.

The ADS1231 is available in an SO-16 package and is specified from –40°C to +85°C.
filter 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 24-Bit ADC for Bridge Sensors datasheet (Rev. D) 2013/10/30
應用說明 Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 2024/3/18
應用說明 A Basic Guide to Bridge Measurements (Rev. A) PDF | HTML 2024/3/13
應用說明 Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 2023/3/29
電子書 Fundamentals of Precision ADC Noise Analysis (Rev. A) 2020/6/19
技術文章 The real secret to become a better cook. Integrate smart scale technology in kitch PDF | HTML 2016/10/25
電子書 Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs 2015/3/19
應用說明 Delta-Sigma ADC Design for Bridge Sensor Applications 2011/9/30
使用指南 ADS1x31REF User Guide (Rev. A) 2011/8/10

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS1231REF — ADS1231 評估模組

ADS1231REF 為一塊電路板，設計用以搭載 ADS1231 24 位元 ΔΣ 高精度、低雜訊類比至數位轉換器。該開發板包含秤重數位器所需的完整電路與使用者介面。適用於對 ADS1231 裝置進行一般性評估。該開發板由 +5VDC 與 +3.3VDC 供電，這些電源由板上兩個穩壓器 U1 與 U2 產生。採用微控制器 MSP430F449，提供操作 LCD 控制器、硬體 SPI™ 與 UART 介面所需的記憶體，並具備一個乘法器，用以執行多項韌體乘法運算。

 

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

ADS1131, ADS1231 IBIS Model (Rev. A)

SBAM017 (35 KB) - IBIS 模型
支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
設計工具

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片