ADS7066
- Small solution size:
- DSBGA and WQFN packages
- Space-saving, capless, 2.5-V internal reference
- 8 channels configurable as any combination of:
- Up to 8 analog inputs, digital inputs, or digital outputs
- Programmable averaging filters:
- Programmable sample size for averaging
- Averaging with internal conversions
- 20-bit resolution for average output
- Low-leakage multiplexer with channel sequencer:
- Manual mode, on-the-fly mode, and auto-sequence mode
- Excellent AC and DC performance:
- SNR: 91.9 dB, THD: –100 dB
- Improved SNR with programmable averaging filters
- INL: ±1 LSB, 16-bit no missing codes
- Internal calibration improves offset and drift
- 250 kSPS sample rate with no latency
- Wide operating range:
- ADC input range: 0 V to V REF and 2 × V REF
- Analog supply: 3 V to 5.5 V
- Digital supply: 1.65 V to 5.5 V
- Temperature range: –40°C to +125°C
- Enhanced-SPI digital interface:
- High-speed, 60-MHz SPI
The ADS7066 is a small, 16-bit, 8-channel, high-precision successive-approximation register (SAR) analog-to-digital converter (ADC). The ADS7066 has an integrated capless reference and a reference buffer that helps reduce the overall solution size by requiring fewer external components. The device family includes the ADS7067 (800 kSPS) and the ADS7066 (250 kSPS) speed variants.
The ADS7066 features built-in offset calibration for improved accuracy over wide operating conditions of the system. The programmable averaging filters enable higher resolution measurement. The eight channels of the ADS7066 can be individually configured as analog inputs, digital inputs, or digital outputs that simplify circuit design for mixed signal feedback and digital control.
The enhanced-SPI enables the ADS7066 in achieving high throughput at lower clock speeds, thereby simplifying the board layout and lowering system cost. The ADS7066 features a cyclic redundancy check (CRC) for data read and write operations and the power-up configuration.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | ADS7066 Small, 8-Channel, 16-Bit, 250-kSPS SAR ADC With GPIOs datasheet (Rev. C) | PDF | HTML | 2023年 9月 15日 |
| Product overview | High Speed Amplifiers for In-Vitro Diagnostics (IVD) Analog Front End | PDF | HTML | 2025年 4月 10日 | |
| Application brief | Implementation of CRC for ADS7066 | PDF | HTML | 2020年 8月 20日 | |
| Certificate | ADS7066EVM-PDK EU Declaration of Conformity (DoC) | 2020年 6月 12日 | ||
| EVM User's guide | ADS7066EVM-PDK Evaluation Module User's Guide (Rev. A) | 2020年 5月 15日 | ||
| Application brief | Resolution-Boosting ADS7066 Using Programmable Averaging Filter | PDF | HTML | 2020年 4月 27日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS7066EVM-PDK — 適用於八通道、250-kSPS、16 位元、內部參考 ADC 的 ADS7066 性能展示套件
ADS7066 評估模組 (EVM) 性能示範套件 (PDK) 是用於評估 ADS7066 漸近法暫存器 (SAR) 類比轉數位轉換器 (ADC) 性能的平台
ADS7066EVM-PDK 提供電源與通訊卡,並搭載圖形使用者介面 (GUI),可快速評估性能與功能,並可輕易地透過 I/O 擴展器連接 8 輸入通道零件。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
支援產品和硬體
產品
精密運算放大器 (Vos<1mV)
一般用途運算放大器
音訊運算放大器
轉阻放大器
高速運算放大器 (GBW ≥ 50 MHz)
功率運算放大器
視訊放大器
線路驅動器
轉導放大器與雷射驅動器
全差分放大器
精確 ADC
生物感測 AFE
高速 ADC (≥10 MSPS)
差分放大器
儀器放大器
類比電流感測放大器
數位電源監測器
配備整合式分流電阻器的類比電流感測放大器
具整合式分流電阻器的數位電源監測器
晶粒與晶圓服務
RF 接收器
RF 發射器
Specialty audio amplifiers
音訊 ADC
Application-specific data converters|MRI
SBAR007 — ADS7066 CRC Calculator
支援產品和硬體
產品
精確 ADC
硬體開發
開發板
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
支援產品和硬體
產品
串聯電壓參考
精確 ADC
生物感測 AFE
整合式精密 ADC 與 DAC
高速 ADC (≥10 MSPS)
精密 DAC (≤10 MSPS)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YBH) | 16 | Ultra Librarian |
| WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。