首頁 放大器 電流感測放大器 類比電流感測放大器
首頁
放大器
電流感測放大器
類比電流感測放大器

INA303-Q1

現行

具有窗口比較器的 AEC-Q100、36V、雙向、550 kHz、4V/µs、高精度電流感測放大器

立即訂購
產品規格表

INA303-Q1

現行
產品規格表 立即訂購

產品詳細資料

Product type Analog output with integrated comparator Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 30, 50, 80 Input offset drift (±) (typ) (µV/°C) 0.1 Features Alert Function, Bidirectional, High precision, Low-side Capable Rating Automotive Voltage gain (V/V) 20, 50, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 400, 440, 550 Iq (max) (mA) 1.1 Number of channels 1 Comparators (#) 2 Gain error (%) 0.075, 0.1, 0.15 Gain error drift (±) (max) (ppm/°C) 10 Slew rate (V/µs) 4 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
Product type Analog output with integrated comparator Common-mode voltage (max) (V) 36 Common-mode voltage (min) (V) 0 Input offset (±) (max) (µV) 30, 50, 80 Input offset drift (±) (typ) (µV/°C) 0.1 Features Alert Function, Bidirectional, High precision, Low-side Capable Rating Automotive Voltage gain (V/V) 20, 50, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 400, 440, 550 Iq (max) (mA) 1.1 Number of channels 1 Comparators (#) 2 Gain error (%) 0.075, 0.1, 0.15 Gain error drift (±) (max) (ppm/°C) 10 Slew rate (V/µs) 4 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
TSSOP (PW) 14 32 mm² (5 mm × 6.4 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • HBM ESD classification level 2
    • CDM ESD classification level C6
  • Functional Safety-Capable
  • Wide common-mode input range: –0.1 V to +36 V
  • Dual comparator outputs:
    • INA302-Q1: Two independent overlimit alerts
    • INA303-Q1: Window comparator
    • Threshold levels set individually
    • Comparator 1 alert response: 1 µs
    • Comparator 2 adjustable delay: 2 µs to 10 s
    • Open-drain outputs with independent latch control modes
  • High accuracy amplifier:
    • Offset voltage: 30 µV (max, A3 version)
    • Offset voltage drift: 0.5 µV/°C (max)
    • Gain error: 0.15% (max, A3 version)
    • Gain error drift: 10 ppm/°C
  • Available amplifier gains:
    • INA302A1-Q1, INA303A1-Q1: 20 V/V
    • INA302A2-Q1, INA303A2-Q1: 50 V/V
    • INA302A3-Q1, INA303A3-Q1: 100 V/V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
    • HBM ESD classification level 2
    • CDM ESD classification level C6
  • Functional Safety-Capable
  • Wide common-mode input range: –0.1 V to +36 V
  • Dual comparator outputs:
    • INA302-Q1: Two independent overlimit alerts
    • INA303-Q1: Window comparator
    • Threshold levels set individually
    • Comparator 1 alert response: 1 µs
    • Comparator 2 adjustable delay: 2 µs to 10 s
    • Open-drain outputs with independent latch control modes
  • High accuracy amplifier:
    • Offset voltage: 30 µV (max, A3 version)
    • Offset voltage drift: 0.5 µV/°C (max)
    • Gain error: 0.15% (max, A3 version)
    • Gain error drift: 10 ppm/°C
  • Available amplifier gains:
    • INA302A1-Q1, INA303A1-Q1: 20 V/V
    • INA302A2-Q1, INA303A2-Q1: 50 V/V
    • INA302A3-Q1, INA303A3-Q1: 100 V/V

The INA302-Q1 and INA303-Q1 (INA30x-Q1) devices feature a high common-mode, bidirectional, current-sensing amplifier and two high-speed comparators to detect out-of-range current conditions. The INA302-Q1 comparators are configured to detect and respond to overcurrent conditions. The INA303-Q1 comparators are configured to respond to both overcurrent and undercurrent conditions in a windowed configuration. These devices feature an adjustable limit threshold range for each comparator set using an external limit-setting resistor. These current-shunt monitors can measure differential voltage signals on common-mode voltages that can vary from –0.1 V up to +36 V, independent of the supply. In addition, these devices will survive with common-mode voltages as high as 40 V.

The open-drain alert outputs can be configured to operate in either a transparent mode (output status follows the input state), or in a latched mode (alert output is cleared when the latch is reset). The alert response time for comparator 1 is under 1 µs, and the alert response for comparator 2 is set through an external capacitor ranging from 2 µs to 10 s.

These devices operate from a single 2.7-V to 5.5-V supply, drawing a maximum supply current of 950 µA. The devices are specified over the extended operating temperature range of –40°C to +125°C, and are available in a 14-pin TSSOP package.

The INA302-Q1 and INA303-Q1 (INA30x-Q1) devices feature a high common-mode, bidirectional, current-sensing amplifier and two high-speed comparators to detect out-of-range current conditions. The INA302-Q1 comparators are configured to detect and respond to overcurrent conditions. The INA303-Q1 comparators are configured to respond to both overcurrent and undercurrent conditions in a windowed configuration. These devices feature an adjustable limit threshold range for each comparator set using an external limit-setting resistor. These current-shunt monitors can measure differential voltage signals on common-mode voltages that can vary from –0.1 V up to +36 V, independent of the supply. In addition, these devices will survive with common-mode voltages as high as 40 V.

The open-drain alert outputs can be configured to operate in either a transparent mode (output status follows the input state), or in a latched mode (alert output is cleared when the latch is reset). The alert response time for comparator 1 is under 1 µs, and the alert response for comparator 2 is set through an external capacitor ranging from 2 µs to 10 s.

These devices operate from a single 2.7-V to 5.5-V supply, drawing a maximum supply current of 950 µA. The devices are specified over the extended operating temperature range of –40°C to +125°C, and are available in a 14-pin TSSOP package.
filter 尋找其它 類比電流感測放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
INA301-Q1 現行 具比較器的 AEC-Q100、36V、550kHz、4V/µs、高精度電流感測放大器 The INA301-Q1 has a single ALERT with similar performance.
INA302-Q1 現行 具雙比較器的 AEC-Q100、36V、雙向、550kHz、4V/µs、高精度電流感測放大器 The INA303-Q1 has window comparator functionality while INA302 has two over-current comparators

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 INA30x-Q1 AEC-Q100, 36-V, Bidirectional, 550-kHz, 4V/µs, High-Precision Current Sense Amplifier With Dual Window Comparator datasheet (Rev. A) PDF | HTML 2021/5/25
應用說明 Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A) PDF | HTML 2026/4/27
應用說明 Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers PDF | HTML 2024/11/18
Application brief Integrating the Current Sensing Resistor (Rev. D) PDF | HTML 2023/4/7
Application brief Measuring Current To Detect Out-of-Range Conditions (Rev. D) PDF | HTML 2022/3/10
Application brief Measuring Current for Handle Multiple Out-of-Range Conditions (Rev. C) PDF | HTML 2021/10/4
Application brief Integrating the Current Sensing Signal Path (Rev. B) PDF | HTML 2021/9/29
功能安全資訊 INA30x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021/4/15
Application brief High-Side Motor Current Monitoring for Over-Current Protection (Rev. B) PDF | HTML 2021/2/23
Application brief Bidirectional, Low-Side Phase Current Sensing With Onboard Overcurrent Detection (Rev. D) 2019/3/6
Application brief External current sense amps vs integrated onboard amplifiers for current sensing (Rev. B) 2019/2/19
Circuit design Overcurrent event detection circuit 2018/7/31
Application brief Low-Drift, Low-Side Current Measurements for Three-Phase Systems (Rev. B) 2017/9/5
白皮書 Overcurrent protection enables more efficient and reliable systems 2016/5/16

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

INA303EVM — INA303 高速精密電流感測放大器評估模組

INA303EVM 評估模組是一款精巧、易於使用的平台，在指定輸入電壓、共模電壓與溫度範圍下運用雙整合式比較器，評估 INA303 高速精密電流感測放大器的主要功能與性能。EVM 配備所有可獨立評估的 3 個增益變體，並提供測試點以輕鬆探查所有關鍵訊號。該 EVM 也包含 LED 指示燈，可方便監控比較器輸出訊號。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TMAG5124EVM — TMAG5124 2 線霍爾效應開關評估模組

TMAG5124EVM 是用於 TMAG5124 的評估模組 (EVM)，TMAG5124 是一款採用閉電流迴路做為相關訊號的 2 線霍爾效應感測器。此 EVM 旨在協助方便快速地使用該裝置系列，包含單一印刷電路板 (PCB)，可分為五個獨立部分，可用於評估長距離的不同裝置變體。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

INA303 PSpice Model

SBOMB40.ZIP (63 KB) - PSpice 模型
支援產品和硬體
模擬型號

INA303 TINA-TI Reference Design (Rev. A)

SBOMAB9A.TSC (306 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

INA303 TINA-TI Spice Model

SBOMAC0.ZIP (29 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

INA303A1 PSpice Model

SBOMBH6.ZIP (33 KB) - PSpice 模型
支援產品和硬體
模擬型號

INA303A3 PSpice Model

SBOMBG0.ZIP (33 KB) - PSpice 模型
支援產品和硬體
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

支援產品和硬體
計算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。

除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。

支援產品和硬體
計算工具

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

此 Excel 計算機提供兩個與五個標準電流感測放大器的比較，並提供包含各裝置基本參數的圖表。此計算機也會採用使用者的系統條件輸入，例如共模電壓、供應電壓、分流電阻器值與公差，然後在可調整電流範圍中繪製錯誤曲線。此外，計算機會根據計算的全刻度輸入電壓除以最大量測電流，輸出最大分流值 (mΩ)。
支援產品和硬體
參考設計

TIDA-00302 — 具瞬態穩定性的電流分流監控器參考設計

此高壓側電流分流監控器可用於測量電流通過电流感测電阻器時在电阻器上所形成的電壓。

此外，實作外部保護電路以提供突波和快速暫態保護，並針對 IEC61000-4-4 和 IEC61000-4-5 展示不同的抗擾度等級。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片