ADS1259
- 24 Bits, No Missing Codes
- Output Data Rates From 10 To 14kSPS
- High Performance:
- INL: 0.4ppm
- Reference Drift: 2ppm/°C
- Gain Drift: 0.5ppm/°C
- Offset Drift: 0.05µV/°C
- Noise: 0.7µVRMS at 60SPS
- Simultaneous 50/60Hz Rejection at 10SPS
- Single-Cycle Settling
- Internal Oscillator
- Out-of-Range Detection
- Readback Data Integrity by Checksum and Redundant Data Read Capability
- SPI-Compatible Interface
- Analog Supply: +5V or ±2.5V
- Digital Supply: +2.7V to +5V
- Low Power: 13mW
- APPLICATIONS
- Industrial Process Control
- Scientific Instrumentation
- Test and Measurement
All other trademarks are the property of their respective owners
The ADS1259 is a high-linearity, low-drift, 24-bit, analog-to-digital converter (ADC) designed for the needs of industrial process control, precision instrumentation, and other exacting applications. Combined with a signal amplifier (such as the PGA280), a high-resolution, high-accuracy measurement system is formed that is capable of digitizing a wide range of signals.
The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The data rates are programmable up to 14kSPS including 10SPS, 50SPS, and 60SPS that provide excellent normal mode line-cycle rejection. The digital filter can be programmed for a fast settling mode where the conversions settle in a single cycle, or programmed for a high line-cycle rejection mode. A fast responding input over-range detector flags the conversion data if an input over-range should occur.
The ADS1259 also provides an integrated low-noise, very low drift 2.5V reference. The on-chip oscillator, an external crystal, or an external clock can by used as the ADC clock source.
Data and control communication are handled over a 4MHz, SPI-compatible interface capable of operating with a minimum of three wires. Data integrity is augmented by data bytes checksum and redundant data read capability. Conversions are synchronized either by command or by pin.
Dissipating only 13mW in operation, the ADS1259 can be powered down, dissipating less than 25µW. The ADS1259 is offered in a TSSOP-20 package and is fully specified from –40°C to +105°C.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | Industrial, 14kSPS, 24-Bit Analog-to-Digital Converter with Low-Drift Reference datasheet (Rev. D) | 2011/8/26 | |||
| 應用說明 | Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2024/3/18 | |||
| 應用說明 | A Basic Guide to Bridge Measurements (Rev. A) | PDF | HTML | 2024/3/13 | |||
| 應用說明 | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023/3/29 | |||
| 應用說明 | Communication Methods for Data Integrity Using Delta-Sigma Data Converters (Rev. A) | PDF | HTML | 2021/8/23 | |||
| 電子書 | Fundamentals of Precision ADC Noise Analysis (Rev. A) | 2020/6/19 | ||||
| 類比設計期刊 | Enabling precision delta‐sigma ADCs in functional safety applications | 2020/3/19 | ||||
| 電子書 | Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs | 2015/3/19 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
ADS1259EVM-PDK — ADS1259 性能展示套件
ADS1259EVM-PDK 為一套完整的評估/示範套件，結合 ADS1259EVM 與以 DSP 為基礎的 MMB0 主機板。主機板和 ADCPro™ 評估軟體可藉由提供的 USB 埠與個人電腦配合使用。電路板組合可評估 ADS1259 和 PGA280。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
類比工程師的計算機旨在加速類比電路設計工程師定期使用的許多重複計算。此基於 PC 的工具提供圖形介面，列出各種常見計算，從使用回饋電阻器設定運算放大器增益到選擇適當的電路設計元件以穩定類比數位轉換器 (ADC) 驅動緩衝電路。
除了作為獨立工具使用外，此計算機還與類比工程師口袋參考中描述的概念相得益彰。
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TSSOP (PW) | 20 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。