MSPM0G3529-Q1
具有 512kB 快閃記憶體、128kB SRAM、2 個 CAN-FD、2 個 ADC、DAC 和 COMP 的車用 80MHz ARM® Cortex®-M0+ MCU
MSPM0G3529-Q1
- Core
- Arm 32-bit Cortex M0+ CPU with memory protection unit, frequency up to 80MHz
-
Functional Safety-Compliant targeted
-
Developed for functional safety applications
- Documentation to aid ISO 26262 system design will be available
-
Systematic capability up to ASIL B targeted
-
- PSA-L1 Certification targeted
- Operating characteristics
- Extended temperature: –40°C up to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 512KB of flash memory with error correction code (ECC)
-
Dual-bank with address swap for OTA updates
-
- 16KB data flash bank with ECC protection
- 128KB total SRAM
- SRAM (Bank 0): 64kB SRAM with ECC protection or hardware parity, and retention down to STANDBY mode
- SRAM (Bank 1): 64kB SRAM with retention down to STOP mode
- Up to 512KB of flash memory with error correction code (ECC)
- High-performance analog peripherals
- Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADC) with up to 27 external channels
- 14-bit effective resolution at 250ksps with hardware averaging
- Three high-speed comparators (COMP) with integrated 8-bit reference DACs
- 32ns propagation delay in high-speed mode
- Support low-power mode operation down to <1µA
- One 12-bit 1Msps digital-to-analog converter (DAC) with integrated output buffer
- Programmable analog connections between ADC, COMP and DAC
- Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
- Integrated temperature sensor
- Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADC) with up to 27 external channels
- Optimized low-power modes
- RUN: 123µA/MHz (CoreMark)
- SLEEP: 38µA/MHz
- STOP: 223µA at 4MHz
- STANDBY: 1.7µA at 32kHz with RTC and SRAM Bank 0 and state retention
- SHUTDOWN: 92nA with IO wake-up capability
- Intelligent digital peripherals
- 12-channel DMA controller
- Math accelerator supports DIV, SQRT, MAC and TRIG computations
- Nine timers support up to 28 PWM channels
- Two 16-bit general-purpose timers support QEI
- Four 16-bit general-purpose timers support low-power operation in STANDBY mode
- One 32-bit general-purpose timer
- Two 16-bit advanced timers with deadband support and complimentary outputs up to 12 PWM channels
- Two windowed watchdog timers (WWDT), one independent watchdog timer (IWDT)
- RTC with alarm and calendar mode
- Enhanced communication interfaces
- Seven UART interfaces
- Two supporting LIN, IrDA, DALI, Smart Card, Manchester
- Three supporting low-power operation in STANDBY mode
- Three I2C interfaces supporting up to FM+ (1Mbit/s), SMBus/PMBus, and wakeup from STOP mode
- Three SPI interfaces, with one supporting up to 32Mbits/s
- Two Controller Area Network (CAN) interfaces support CAN 2.0 A or B and CAN-FD
- Seven UART interfaces
- Clock system
- Internal 4 to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
- Phase-locked loop (PLL) up to 80MHz
- Internal 32kHz low-frequency oscillator (LFOSC) with ±3% accuracy
- External 4 to 48MHz crystal oscillator (HFXT)
- External 32kHz crystal oscillator (LFXT)
- External clock input
- Data integrity and encryption
- AES-128/256 accelerator with support for GCM/GMAC, CCM/CBC-MAC, CBC, CTR
- Secure key storage for up to four AES keys
- Flexible firewalls for protecting code and data
- True random number generator (TRNG)
- Cyclic redundancy checker (CRC-16, CRC-32)
- Flexible I/O features
- Up to 94 GPIOs
- Two 5V-tolerant open-drain IOs
- Three high-drive IOs with 20mA drive strength
- Four high-speed IOs
- Up to 94 GPIOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 64-pin LQFP (PM) (0.5mm pitch)
- Family members (also see Device Comparison)
- MSPM0G3529-Q1: 512KB flash, 128KB RAM
- Development kits and software (also see Tools and Software)
- Automotive qualification
- AEC-Q100 Grade 1 (-40°C to 125°C)
MSPM0G352x-Q1 microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform, operating at up to 80MHz frequency. These MCUs offer a blend of cost optimization and design flexibility for applications requiring 256KB to 512KB of flash memory in small packages or high pin count packages (up to 100 pins). These devices include dual CAN-FD controllers, cybersecurity enablers, high performance integrated analog, and provide excellent low power performance across the operating temperature range.
The device has up to 512KB of embedded flash program memory with built-in error correction code (ECC) and up to 128KB SRAM (with ECC and parity protection for the first 64kB). The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.
Flexible cybersecurity enablers can be used to support secure boot, secure in-field firmware updates, IP protection (execute-only memory), key storage, and more. Hardware acceleration is provided for a variety of AES symmetric cipher modes, as well as a TRNG entropy source. The cybersecurity architecture is pending Arm® PSA Level 1 certification.
A set of high performance analog modules is provided, such as two simultaneously sampling 12-bit, 4Msps ADCs supporting up to 27 external channels, on-chip voltage reference (1.4V or 2.5V), one 12-bit 1Msps DAC, and three comparators operable in low-power and high-speed modes with additional built-in 8-bit reference DACs .
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.
MSPM0G352x-Q1 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSPM0 Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | MSPM0G352x-Q1 Automotive Mixed-Signal Microcontrollers With CAN-FD Interface datasheet (Rev. B) | PDF | HTML | 2025/10/28 | ||
| * | 勘誤表 | MSPM0Gx51x Mixed-Signal Microcontrollers Errata (Rev. E) | PDF | HTML | 2026/7/6 | ||
| 應用說明 | EMC Improvement Guide for MSPM0 (Rev. A) | PDF | HTML | 2025/12/2 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-MSPM0G3519 — LP-MSPM0G3519 評估模組
LP-MSPM0G3519 LaunchPad™ 開發套件是基於 MSPM0G3519 的易用型評估模組 (EVM)。其包含開始在 MSPM0G3519 M0+ MCU 平台上開發所需的一切，包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板包含三個按鈕、兩個 LED (一個是 RGB LED) 和超過 80 個針腳。運用最佳配置的 ADC 和 DAC 低通濾波器預留位置，以及 Launchpad 背面提供的外部參考選項，改善類比結果。
MSPM0-SDK — MSPM0 Software Development Kit (SDK)
MSPM0 SDK 提供軟體、工具和文件的終極集合，可使用單一軟體套件，加速開發 MSPM0 MCU 平台的應用。
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio 是一款可簡化韌體開發的視覺設計環境，並且能在數分鐘內設定、開發及執行微控制器應用程式，無須編碼，也不需要 IDE。提供獨立下載或雲端版本。
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
MSPM0-ACADEMY — MSPM0™ academy
CCSTUDIO-STARTHUB — Example application browser
MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications
MSP 馬達控制為一系列軟體、工具和範例，可在 30 分鐘或更短時間內運用 MSPM0 Arm® Cortex® M0+ MCU 和熱門馬達驅動器解決方案來運轉馬達。
MSP 馬達控制提供可轉動有刷、步進與三相馬達的受支援硬體套件範例，具備最佳性能、整合性與易用性的感測和無感測器控制演算法。透過訂購硬體、連接馬達及使用我們的圖形使用者介面或線上程式碼範例，可隨時運轉您的馬達。
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
LP-MSPM0G3507-OOBE — Out-of-box experience GUI for LP-MSPM0G3507
MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0
MSPM0 類比配置器是一款圖形配置工具，旨在使用 MSPM0 裝置簡化和加速類比訊號鏈的設計和實現，無需進行傳統的程式碼開發。
此工具使用直覺式 GUI，透過 MSPM0 裝置的高類比整合配置訊號鏈，即時分析和繪製訊號，並產生快閃裝置所需的配置和程式碼。
MSP-GANG-SOFTWARE — MSP-GANG Software
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| LQFP (PM) | 64 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。