MSPM0L1117
- Core
- Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 32MHz
- PSA-L1 Certification targeted
- Operating characteristics
- Extended temperature: –40°C to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 128KB of flash memory with error correction code (ECC)
-
Dual-bank with address swap for OTA updates
-
- 16KB of SRAM
- Up to 128KB of flash memory with error correction code (ECC)
- High-performance analog peripherals
- One 12-bit 1.68Msps analog-to-digital converter (ADC) with up to 13 external channels
- 14-bit effective resolution at 105ksps with hardware averaging
- Configurable 1.4V or 2.5V internal voltage reference (VREF)
- Integrated temperature sensor
- One 12-bit 1.68Msps analog-to-digital converter (ADC) with up to 13 external channels
- Optimized low-power modes
- RUN: 106µA/MHz (CoreMark)
- SLEEP: 50µA/MHz
- STOP: 239µA at 4MHz
- STANDBY: 1.5µA at 32kHz with RTC and full SRAM and state retention
- SHUTDOWN: 75nA with IO wake-up capability
- Intelligent digital peripherals
- 3-channel DMA controller
- 3-channel event fabric signaling system
-
A total of 14 PWM channels supported by:
-
One 16-bit advanced timer with deadband support and complimentary outputs up to 8 PWM channels
- Two 16-bit general-purpose timers support low-power operation in STANDBY mode
- One 16-bit general purpose timer supporting QEI
-
- One windowed watchdog timer (WWDT)
- One independent watchdog timer (IWDT)
- RTC with alarm and calendar mode
- Enhanced communication interfaces
-
Two UART interfaces supporting low-power operation in STANDBY mode
- One supporting LIN, IrDA, DALI, Smart Card, Manchester
- One I2C interface supporting up to FM+ (1Mbit/s), SMBus/PMBus, and wakeup from STOP mode
- One SPI interface supporting up to 16Mbit/s
-
- Clock system
- Internal 4 to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
- Internal 32kHz low-frequency oscillator (LFOSC) with ±3% accuracy
- External 32-kHz crystal oscillator (LFXT)
- Data integrity and encryption
- AES-128/256 accelerator with support for GCM/GMAC, CCM/CBC-MAC, CBC, CTR
- Secure key storage for up to two AES keys
- Flexible firewalls for protecting code and data
- True random number generator (TRNG)
- Cyclic redundancy checker (CRC-16, CRC-32)
- Flexible I/O features
- Up to 44 GPIOs
- Two 5V-tolerant open-drain IOs
- Seven high-drive IOs with 20mA drive strength
- One high-speed IO
- Up to 44 GPIOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 48-pin LQFP (PT) (0.5mm pitch)
- 48-pin VQFN (RGZ) (0.5mm pitch)
- 32-pin VQFN (RHB) (0.5mm pitch)
- 24-pin VQFN (RGE) (0.5mm pitch)
- Family members (also see Device Comparison)
- MSPM0L1116: 64KB of flash, 16KB of RAM
- MSPM0L1117: 128KB of flash, 16KB of RAM
- Development kits and software (also see Tools and Software)
- LP-MSPM0L1117 LaunchPad™ development kit
- MSP Software Development Kit (SDK)
MSPM0L111x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 32MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration and excellent low-power current consumption. The MCUs also support extended temperature ranges from -40°C to 125°C and operate with supply voltages ranging from 1.62V to 3.6V.
The device has up to 128KB of embedded flash memory with built-in error correction code (ECC) and up to 16KB SRAM. The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.
Flexible cybersecurity enablers can be used to support secure boot, secure in-field firmware updates, IP protection (execute-only memory), key storage, and more. Hardware acceleration is provided for a variety of AES symmetric cipher modes, as well as a TRNG entropy source. The cybersecurity architecture is pending Arm® PSA Level 1 certification.
These MCUs incorporate a high-speed on-chip oscillator with an accuracy up to ±1.2%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, 16-bit/32-bit CRC accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.68Msps ADC with configurable internal voltage reference and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced control timer and two 16-bit general purpose timers, one general purpose timer with Quadrature Enabled Input, windowed and independent watchdog timer, and a variety of communication peripherals including one I2C, one SPI, and two UARTs (one with support for LIN protocol).
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers to find the MCU that meets their projects needs. The architecture combined with extensive low-power modes are optimized to achieve extended battery life in portable measurement applications.
MSPM0L111x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ development kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 L-Series 32MHz Microcontrollers Technical Reference Manual.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-MSPM0L1117 — 適用於 32MHz Arm® Cortex®-M0+ MCU 的 MSPM0L1117 LaunchPad™ 開發套件
MSPM0L1117 Launchpad 是以 MSPM0L1117 為基礎的易用評估模組 (EVM)。其包含開始在 MSPM0L1117 M0+ 平台上開發所需的一切,包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板包含 3 個按鈕、2 個 LED(1 個為 RGB)及 40 針腳接頭,以輕鬆連接針腳。
ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器
μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。
在單機模式下,只要按下「開始」按鈕或透過一些 TTL 控制線,就可以執行編程週期。
其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。
TMDSEMU200-U — XDS200 USB 偵錯探測器
XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器(模擬器)。對於大多數裝置,建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準(IEEE1149.1、IEEE1149.7、SWD)。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。
XDS200 透過 TI 20 接腳連接器(配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器)連接到目標電路板,並透過 USB2.0 高速 (...)
SEGGR-3P-J-LINK — 偵錯探針的 SEGGER J-Link 系列
SEGGER J-Link 是業界領先的嵌入式系統開發除錯探針系列。J-Link 以其卓越的速度、可靠性與多功能性著稱,已成為全球開發人員的首選工具。二十多年來,這些探針在各種嵌入式應用與產業中,對於高效率的除錯、程式燒錄與效能分析都扮演了不可或缺的角色。
J-Link 除錯探針是優化除錯與快閃記憶體燒錄體驗的首選解決方案。使用者可享受破紀錄的快閃載入器、最高可達 4 MB/s 的 RAM 下載速度,以及在微控制器快閃記憶體中設定無限制斷點的能力。這種速度、彈性與可靠性的組合,使 SEGGER J-Link 成為任何嵌入式系統開發人員不可或缺的工具。
若要檢視 J-Link 支援的 TI (...)
SEGGR-3P-J-TRACE — 串流追蹤探針的 SEGGER J-Trace 系列
SEGGER 的 J-Trace 是一款專業的串流追蹤探針,配備完整的功能清單,專為滿足嵌入式開發人員的除錯需求而設計,並提供最佳的追蹤體驗。具備無限制串流追蹤、即時程式碼剖析與即時程式碼覆蓋率等功能,J-Trace 可幫助開發人員有效隔離並識別難以發現的程式缺陷。
J-Trace 支援多平台,包括 Windows、macOS 及 Linux,應用範圍廣泛。它與大多數熱門 IDE 相容,確保能無縫整合進各種開發環境中。
SEGGER 已針對下列 TI 裝置進行 J-Trace 測試,並建立參考專案以驗證(串流)追蹤功能:AM3359、AM3517、Jacinto 7 (...)
ACROVIEW-3P-AP6000 — AP6000 programmer support all TI programmable chips, including EP Product, Power ICs, and Gauge ICs
AP6000, launched by Acroview, is a universal programmer designed to support TI ICs across all series. Leveraging Acroview's highly skilled algorithm R&D engineering team, it delivers the fastest chip support speed in the industry.The AP6000 is capable of programming 8 chips simultaneously, and (...)
ACROVIEW-3P-AP8000 — AP8000 Universal Programming System, including all TI programmable chips.
AP8000 is a leading technology platform of Universal Programming developed by Acroview. We have an accomplished team of algorithm R&D engineers, to offer the fastest chip support software development service among the industry. The AP8000 can support the programming of 8 chips simultaneously. (...)
ALGO-3P-WRITENOW — Algocraft WriteNow!程式設計工具
WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧,便於整合至 ATE 與固定裝置。編程器可單機運作,或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線,並隨附操作簡易的工具軟體。
LP-MSPM0L1306-OOBE — Out-of-box experience GUI for LP-MSPM0L1306
支援產品和硬體
MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0
The MSPM0 analog configurator is a graphical configuration tool designed to simplify and accelerate the design and enablement of an analog signal chain using a MSPM0 device with no traditional coding development necessary.
The tool uses an intuitive GUI to configure a signal chain using the high (...)
支援產品和硬體
CCSTUDIO-STARTHUB — Example application browser
支援產品和硬體
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
支援產品和硬體
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)
支援產品和硬體
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.
支援產品和硬體
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
支援產品和硬體
MSPM0-ACADEMY — MSPM0 Academy
支援產品和硬體
GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS
MSP-GANG-SOFTWARE — MSP-GANG Software
支援產品和硬體
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| LQFP (PT) | 48 | Ultra Librarian |
| VQFN (RGE) | 24 | Ultra Librarian |
| VQFN (RGZ) | 48 | Ultra Librarian |
| VQFN (RHB) | 32 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。