首頁 微控制器 (MCU) 與處理器 Microcontrollers 通用型 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
通用型 MCU

MSPM0G1107

現行

具有 128KB 快閃記憶體 32KB SRAM 2 個 12 位元 4Msps ADC、運算放大器的 80MHz Arm® Cortex®-M0+ MCU

立即訂購
產品規格表
使用指南

MSPM0G1107

現行
產品規格表 立即訂購

產品詳細資料

CPU Arm Cortex-M0+ Frequency (MHz) 80 Flash memory (kByte) 128 RAM (kByte) 32 ADC type 12-bit SAR Features 5-V-tolerant I/Os, DMA, General purpose, LIN, OpAmp, RTC UART 4 Security Secure debug TI functional safety category Functional Safety-Compliant Number of ADC channels 9, 11, 16, 17 SPI 2 Hardware accelerators 0 Edge AI enabled Edge AI Studio enabled, Yes Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, LIN, SPI, UART Operating system BareMetal (No OS), FreeRTOS, Zephyr RTOS Nonvolatile memory (kByte) 128 Number of GPIOs 20, 24, 28, 44, 60 Number of I2Cs 2
CPU Arm Cortex-M0+ Frequency (MHz) 80 Flash memory (kByte) 128 RAM (kByte) 32 ADC type 12-bit SAR Features 5-V-tolerant I/Os, DMA, General purpose, LIN, OpAmp, RTC UART 4 Security Secure debug TI functional safety category Functional Safety-Compliant Number of ADC channels 9, 11, 16, 17 SPI 2 Hardware accelerators 0 Edge AI enabled Edge AI Studio enabled, Yes Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, LIN, SPI, UART Operating system BareMetal (No OS), FreeRTOS, Zephyr RTOS Nonvolatile memory (kByte) 128 Number of GPIOs 20, 24, 28, 44, 60 Number of I2Cs 2
VSSOP (DGS) 28 34.79 mm² (7.1 mm × 4.9 mm) LQFP (PM) 64 144 mm² (12 mm × 12 mm) VQFN (RGZ) 48 49 mm² (7 mm × 7 mm) DSBGA (YCJ) 28 4.1615 mm² (0 mm × 0 mm) VQFN (RGE) 24 16 mm² (4 mm × 4 mm) LQFP (PT) 48 81 mm² (9 mm × 9 mm) VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • Core
    • Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80MHz
  • Operating characteristics
    • Extended temperature: –40°C up to 105°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 128KB of flash memory with built-in error correction code (ECC)
    • Up to 32KB of SRAM with hardware parity
  • High-performance analog peripherals
    • Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADCs) with up to 17 external channels
      • 14-bit effective resolution at 250ksps with hardware averaging
    • One general-purpose amplifier (GPAMP)
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 101µA/MHz (CoreMark)
    • SLEEP: 40µA/MHz
    • STOP: 190µA at 4MHz
    • STANDBY: 1.5µA with 32KHz LFXT, RTC with SRAM, CPU state, and registers retained
    • SHUTDOWN: 80nA with IO retained and IO wake-up capability
  • Intelligent digital peripherals
    • 7-channel DMA controller
    • Two 16-bit advanced control timers support dead band insertion and fault handling
    • Seven timers supporting up to 22 PWM channels
      • One 16-bit general purpose timer supports QEI
      • Two 16-bit general-purpose timers support low-power operation in STANDBY mode
      • One 32-bit general-purpose timer
      • Two 16-bit advanced timers with deadband and complementary outputs up to 12 PWM channels
    • Two window-watchdog timers (WWDT)
    • RTC with alarm and calendar mode
  • Enhanced communication interfaces
    • Four UART interfaces
      • One supports LIN, IrDA, DALI, Smart Card, Manchester
      • Three support low-power operation in STANDBY mode
    • Two I2C interfaces supporting FM+ (1Mbit/s), SMBus, PMBus, and wakeup from STOP mode
    • Two SPIs, one SPI supports up to 32Mbits/s
  • Clock system
    • Internal 4MHz to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
    • Phase-locked loop (PLL) up to 80MHz
    • Internal 32kHz oscillator (LFOSC) with ±3% accuracy
    • External 4MHz to 48MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator(LFXT)
    • External clock input
  • Data integrity and encryption
    • Cyclic redundancy checker (CRC-16, CRC-32)
  • Flexible I/O features
    • Up to 60 GPIOs
      • Two 5V-tolerant open-drain IOs
      • Two high-drive IOs with 20mA drive strength
      • Up to 5 high speed IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 64-pin LQFP (PM) (0.5mm pitch)
    • 48-pin VQFN (RGZ) (0.5mm pitch)
    • 48-pin LQFP (PT) (0.5mm pitch)
    • 32-pin VQFN (RHB) (0.5mm pitch)
    • 28-pin VSSOP (28DGS) (0.5mm pitch))
    • 28-pin DSBGA (YCJ) (0.35mm pitch)
    • 24-pin VQFN (RGE) (0.5mm pitch)
  • Family members (also see Device Comparison)
    • MSPM0G1105: 32KB flash, 16KB RAM
    • MSPM0G1106: 64KB flash, 32KB RAM
    • MSPM0G1107: 128KB flash, 32KB RAM
  • Development kits and software (also see Tools and Software)
  • Core
    • Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80MHz
  • Operating characteristics
    • Extended temperature: –40°C up to 105°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 128KB of flash memory with built-in error correction code (ECC)
    • Up to 32KB of SRAM with hardware parity
  • High-performance analog peripherals
    • Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADCs) with up to 17 external channels
      • 14-bit effective resolution at 250ksps with hardware averaging
    • One general-purpose amplifier (GPAMP)
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 101µA/MHz (CoreMark)
    • SLEEP: 40µA/MHz
    • STOP: 190µA at 4MHz
    • STANDBY: 1.5µA with 32KHz LFXT, RTC with SRAM, CPU state, and registers retained
    • SHUTDOWN: 80nA with IO retained and IO wake-up capability
  • Intelligent digital peripherals
    • 7-channel DMA controller
    • Two 16-bit advanced control timers support dead band insertion and fault handling
    • Seven timers supporting up to 22 PWM channels
      • One 16-bit general purpose timer supports QEI
      • Two 16-bit general-purpose timers support low-power operation in STANDBY mode
      • One 32-bit general-purpose timer
      • Two 16-bit advanced timers with deadband and complementary outputs up to 12 PWM channels
    • Two window-watchdog timers (WWDT)
    • RTC with alarm and calendar mode
  • Enhanced communication interfaces
    • Four UART interfaces
      • One supports LIN, IrDA, DALI, Smart Card, Manchester
      • Three support low-power operation in STANDBY mode
    • Two I2C interfaces supporting FM+ (1Mbit/s), SMBus, PMBus, and wakeup from STOP mode
    • Two SPIs, one SPI supports up to 32Mbits/s
  • Clock system
    • Internal 4MHz to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
    • Phase-locked loop (PLL) up to 80MHz
    • Internal 32kHz oscillator (LFOSC) with ±3% accuracy
    • External 4MHz to 48MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator(LFXT)
    • External clock input
  • Data integrity and encryption
    • Cyclic redundancy checker (CRC-16, CRC-32)
  • Flexible I/O features
    • Up to 60 GPIOs
      • Two 5V-tolerant open-drain IOs
      • Two high-drive IOs with 20mA drive strength
      • Up to 5 high speed IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 64-pin LQFP (PM) (0.5mm pitch)
    • 48-pin VQFN (RGZ) (0.5mm pitch)
    • 48-pin LQFP (PT) (0.5mm pitch)
    • 32-pin VQFN (RHB) (0.5mm pitch)
    • 28-pin VSSOP (28DGS) (0.5mm pitch))
    • 28-pin DSBGA (YCJ) (0.35mm pitch)
    • 24-pin VQFN (RGE) (0.5mm pitch)
  • Family members (also see Device Comparison)
    • MSPM0G1105: 32KB flash, 16KB RAM
    • MSPM0G1106: 64KB flash, 32KB RAM
    • MSPM0G1107: 128KB flash, 32KB RAM
  • Development kits and software (also see Tools and Software)

MSPM0G110x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 105°C, and operate with supply voltages ranging from 1.62V to 3.6V.

The MSPM0G110x devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with hardware parity option. The devices also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as two 12-bit 4Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces (four UART, two I2C, two SPI).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration that allow customers to find the MCU that meets project needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0G110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.

MSPM0G110x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 105°C, and operate with supply voltages ranging from 1.62V to 3.6V.

The MSPM0G110x devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with hardware parity option. The devices also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as two 12-bit 4Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC) and enhanced communication interfaces (four UART, two I2C, two SPI).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration that allow customers to find the MCU that meets project needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0G110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
filter 尋找其它 通用型 MCU
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 74
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 MSPM0G110x Mixed-Signal Microcontrollers datasheet (Rev. D) PDF | HTML 2025/10/7
* 使用指南 MSPM0 G-Series 80-MHz Microcontrollers Technical Reference Manual (Rev. E) PDF | HTML 2026/7/28
* 勘誤表 MSPM0G350x, MSPM0G150x Mixed-Signal Microcontrollers Errata (Rev. G) PDF | HTML 2026/7/9
應用說明 MSPM0 G-Series MCUs Hardware Development Guide (Rev. E) PDF | HTML 2026/4/29
使用指南 MSPM0 Bootloader User's Guide (Rev. A) PDF | HTML 2026/1/8
應用說明 Cybersecurity Enablers in MSPM0 MCUs (Rev. A) PDF | HTML 2025/12/10
應用說明 EMC Improvement Guide for MSPM0 (Rev. A) PDF | HTML 2025/12/2
應用說明 MSPM0 ADC Noise Analysis and Application (Rev. A) PDF | HTML 2025/11/14
子系統設計 ADC to I2C (Rev. A) PDF | HTML 2025/9/10
子系統設計 DMA Ping Pong With ADC (Rev. B) PDF | HTML 2025/9/9
子系統設計 Thermistor Temperature Sensing (Rev. A) PDF | HTML 2025/9/9
子系統設計 ADC to UART (Rev. A) PDF | HTML 2025/9/9
應用說明 MSPM0 Bootloader Implementation (Rev. D) PDF | HTML 2025/9/4
使用指南 MSPM0 MCUs Development Guide (Rev. G) PDF | HTML 2025/8/27
子系統設計 ADC to SPI (Rev. A) PDF | HTML 2025/8/27
子系統設計 Digital FIR Filter (Rev. A) PDF | HTML 2025/8/27
子系統設計 Digital IIR Filter (Rev. A) PDF | HTML 2025/8/26
子系統設計 Power Sequencer (Rev. A) PDF | HTML 2025/8/25
子系統設計 5V Interface (Rev. A) PDF | HTML 2025/8/20
子系統設計 Data Sensor Aggregator Subsystem Design (Rev. A) PDF | HTML 2025/8/20
子系統設計 CAN to UART bridge (Rev. A) PDF | HTML 2025/8/19
子系統設計 CAN to SPI Bridge (Rev. A) PDF | HTML 2025/8/19
子系統設計 CAN to I2C Bridge (Rev. A) PDF | HTML 2025/8/19
子系統設計 PWM Control Using Push-Buttons PDF | HTML 2025/8/14
子系統設計 Using MSPM0 as a Watchdog Timer PDF | HTML 2025/8/14
子系統設計 Emulate EEPROM with FLASH (Type A) (Rev. A) PDF | HTML 2025/8/13
子系統設計 LED Driver With PWM (Rev. A) PDF | HTML 2025/8/12
子系統設計 Common Amplifier Topologies: PGA (Rev. A) PDF | HTML 2025/8/12
子系統設計 Transimpedance Amplifier (Rev. A) PDF | HTML 2025/8/12
應用說明 Migration Guide From STM32 to Arm-Based MSPM0 (Rev. B) PDF | HTML 2025/8/11
子系統設計 Emulate EEPROM With FLASH (Type B) (Rev. A) PDF | HTML 2025/8/6
應用說明 MSPM0 MCUs Quick Reference Guide (Rev. B) PDF | HTML 2025/8/4
子系統設計 MCU Design Techniques: ADC to PWM (Rev. A) PDF | HTML 2025/8/1
類比設計期刊 在馬達控制中選擇位置感測器 PDF | HTML Download English Version PDF | HTML 2025/7/10
子系統設計 Simultaneous Sampling of ADCs PDF | HTML 2025/6/30
Product overview MSPM0 MCUs: More Options, Unlimited Possibilities (Rev. B) PDF | HTML 2025/6/29
應用說明 Capturing PWM 0% to 100% Duty Cycle with MSPM0 MCU PDF | HTML 2025/6/12
應用說明 Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2025/6/2
應用說明 Migration Guide From STM8 to MSPM0 (Rev. A) PDF | HTML 2025/5/21
白皮書 MSPM0 MCU Advantages in Automotive Application PDF | HTML 2025/3/11
應用說明 LIN Basics and Implementation on MSPM0 PDF | HTML 2025/2/21
應用說明 Laser Speckle Reduction Solution in Projector based on MSPM0 MCU PDF | HTML 2025/2/20
使用指南 Migration Guide From NXP to MSPM0 PDF | HTML 2025/2/3
應用說明 Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025/1/29
應用說明 BQ79616 Control Based on MSPM0 Through UART to CAN PDF | HTML 2024/12/16
應用說明 MSPM0G3507 Low Power Test and Guidance PDF | HTML 2024/10/18
應用說明 Understanding the MSPM0 Debug Subsystem PDF | HTML 2024/9/23
應用說明 A2L Refrigerant Standard Overview and TI Mitigation Control Board Designs for Designers PDF | HTML 2024/9/16
應用說明 TPS929xxx LED Driver Control Using MSPM0 Through UART Over CAN PDF | HTML 2024/9/4
應用說明 SPI to CAN Bridge on MSPM0 MCUs PDF | HTML 2024/8/28
Application brief Bridge Design Between CAN and UART with MSPM0 MCUs PDF | HTML 2024/6/17
Application brief Bridge Design Between CAN and SPI with MSPM0 MCUs PDF | HTML 2024/6/17
Application brief Bridge Design between CAN and I2C with MSPM0 MCUs 2024/6/17
應用說明 Designing Temperature Monitoring Systems with NTC and RTD PDF | HTML 2024/5/15
Application brief Automotive Seat Comfort Module Using MSPM0 PDF | HTML 2024/5/1
應用說明 Realization of Password-Protected Debug Based on Software PDF | HTML 2024/3/6
技術文章 為什麼互通性對於不斷發展的電動車充電市場很重要 PDF | HTML Download English Version PDF | HTML 2024/1/26
Product overview Realizing UWB Passive Entry Passive Start (PEPS) Design with MSPM0 MCU PDF | HTML 2024/1/12
Product overview Realizing HVAC FAN Control Design with MSPM0 MCU PDF | HTML 2023/12/21
應用說明 MSPM0 Enables Cost-Effective Field Transmitter Applications PDF | HTML 2023/12/15
應用說明 Operating Time of MSPM0 Powered by a Capacitor PDF | HTML 2023/10/3
Application brief Build Scalability in Cordless Power and Garden Tools Using Low-Cost MSPM0 MCUs (Rev. A) PDF | HTML 2023/9/27
Application brief Designing Single- and Three-Axis Selfie Sticks With MSPM0 MCUs (Rev. A) PDF | HTML 2023/9/21
Application brief Using MSPM0 MCUs to Design Trapezoidal-Based BLDC Motor Controllers (Rev. A) PDF | HTML 2023/9/14
Application brief BLDC and PMSM Control Using Sensorless FOC Algorithm Based on MSPM0 MCUs (Rev. A) PDF | HTML 2023/9/14
應用說明 EEPROM Emulation Type A Solution PDF | HTML 2023/4/18
應用說明 EEPROM Emulation Type B Design PDF | HTML 2023/4/11
Application brief Optimizing Field Sensor and Transmitter Applications With MSPM0 MCUs PDF | HTML 2023/3/2
Application brief Increasing Flexibility in Your Battery Management Designs With a Low-Cost MSPM0 PDF | HTML 2023/3/2
Application brief Simplifying Pulse Oximeter Designs With Low-Cost Highly Integrated MSPM0 MCUs PDF | HTML 2023/3/2
應用說明 MSPM0 G-Series MCUs Power Optimization Guide PDF | HTML 2023/2/22
應用說明 Make System Design Easy With MSPM0 Precision Analog PDF | HTML 2023/2/22
白皮書 MSPM0: Idea to Product With Easy-to-Use Tools, Software, and Academy PDF | HTML 2023/2/22
應用說明 MSPM0L or MSPM0G: How to Pick the Right MSP Microcontroller for Your Application PDF | HTML 2022/12/13

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLPDLCR160CPEVM — 適用於具備 0.16 nHD 之 DLP® LightCrafter™ Display 的 DLP160CP 評估模組

DLP® LightCrafter™ Display 0.16-nHD 評估模組 (EVM) 旨在實現微控制器 (MCU) 產生的圖形顯示，且不需具備視訊處理器。這在電器、人機介面、機器人和玩具等工業和個人電子應用中，為平價 DLP 自由形式隨選顯示實作開創了全新的可能性。此 EVM 搭載 DLP160CP 晶片組，包括 DLPC3421、0.16-nHD (360x640) 光學引擎和 MSPM0G3507 MCU，可提供開箱即用的影像產生功能。請造訪 DLPDLCR2000EVM，瞭解使用微處理器驅動 (MPU) 顯示應用的 EVM (不包括 MPU)。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8844AEVM — DRV8844A 評估模組

DRV8844A 評估模組 (EVM) 可用於輕鬆評估 DRV8844A 馬達驅動器。EVM 已編程並配置為可立即使用並開始轉動馬達。EVM 展示四路 1/2 全橋式 DC 馬達驅動器，最多可驅動四個電磁閥、兩個有刷 DC 馬達，以及其他負載。DRV8844A 還能在每個獨立半橋上連接感測電阻器，使馬達控制等應用進行系統層級的電流感測。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

LP-MSPM0G3507 — 適用於 80-MHz Arm® Cortex®-M0+ MCU 的 MSPM0G3507 LaunchPad™ 開發套件

LP-MSPM0G3507 LaunchPad™ 開發套件是基於 MSPM0G3507 的易用型評估模組 (EVM)。其包含開始在 MSPM0G3507 M0+ MCU 平台上開發所需的一切，包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板包含三個按鈕、兩個 LED (一個是 RGB LED) 和一個類比溫度感測器和光感測器。此外也具備外部緩衝器，可在 4 MSPS 顯示高速 ADC 性能。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

PSEM0MCUDAUEVM-018 — 適用於 24 埠 IEEE 802.3bt 就緒 PSE 系統的 MSPM0 MCU 子卡

本參考設計展示了一個 24 埠 PSE 系統的評估模組，其中包含硬體套件、系統韌體映像檔及系統韌體圖形使用者介面。該硬體套件包含一塊主機板 (PSEMTHR24EVM-081)、一塊 MSP430 子卡 (PSEMCUDAUEVM-082) 或 MSPM0 子卡 (PSEM0DAUEVM-018)，以及一塊 PSE 子卡 (TPS23881EVM-083)。欲評估此系統（包含硬體與軟體），亦需配備 USB2ANY 與 MSP-FET 轉接器。本指南已修訂，以反映採用新款 MSPM0G1107 MCU 於多埠 PoE 系統的硬體設計。
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
偵錯探測器

TMDSEMU110-U — XDS110 JTAG 偵錯探測器

德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。  對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。

德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU200-U — XDS200 USB 偵錯探測器

XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。

XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

LB-3P-TRACE32-ARM — 適用於 Arm® 架構微控制器和處理器的 Lauterbach TRACE32® 偵錯和追蹤系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證各種 Arm® 架構微控制器和處理器。全球知名的嵌入式系統和 SoC 偵錯和追蹤解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。藉由 TRACE32® 偵錯器，開發人員也可透過單一偵錯介面，同時偵錯和控制 SoC 中的任何 C28x/C29x/C6x/C7x DSP 核心及所有其他 Arm (...)

從：Lauterbach GmbH
支援產品和硬體
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
硬體程式設計工具

C-GANG — 適用於獨立式與整合式快閃且快速可靠的 gang 編程解決方案

C-GANG 是一款低成本的 gang 程式設計工具，可同時編程多達六個相同的目標。本產品相容於各種 TI 微控制器，包括 MSPM0、MSP430 及 C2000 裝置。

從：Elprotronic Inc.
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
軟體開發套件 (SDK)

MSPM0-SDK — MSPM0 Software Development Kit (SDK)

MSPM0 SDK 提供軟體、工具和文件的終極集合，可使用單一軟體套件，加速開發 MSPM0 MCU 平台的應用。

支援產品和硬體
軟體開發套件 (SDK)

MSPM0-SDK-DESIGN — Secure release for the MSPM0 Software Development Kit (SDK)

Secure release for the MSPM0 Software Development Kit (SDK)
支援產品和硬體
軟體開發套件 (SDK)

MSPM0-SDK-DESIGN — Secure release for the MSPM0 Software Development Kit (SDK)

Secure release for the MSPM0 Software Development Kit (SDK)
支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
支援產品和硬體
IDE、配置、編譯器或偵錯程式

MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers

MSP Zero Code Studio 是一款可簡化韌體開發的視覺設計環境，並且能在數分鐘內設定、開發及執行微控制器應用程式，無須編碼，也不需要 IDE。提供獨立下載或雲端版本。

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
線上培訓

MSPM0-ACADEMY — MSPM0™ academy

MSPM0 Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSPM0 MCU portfolio.
支援產品和硬體
快速入門

CCSTUDIO-STARTHUB — Example application browser

Explore a vast library of example projects, categorized by application type, with support for multiple development environments
支援產品和硬體
快速入門

MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications

MSP 馬達控制為一系列軟體、工具和範例，可在 30 分鐘或更短時間內運用 MSPM0 Arm® Cortex® M0+ MCU 和熱門馬達驅動器解決方案來運轉馬達。

MSP 馬達控制提供可轉動有刷、步進與三相馬達的受支援硬體套件範例，具備最佳性能、整合性與易用性的感測和無感測器控制演算法。透過訂購硬體、連接馬達及使用我們的圖形使用者介面或線上程式碼範例，可隨時運轉您的馬達。

支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
作業系統 (OS)

GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS

The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)

從：Green Hills Software
支援產品和硬體
驅動程式或資料庫

MSPM0-DIAGNOSTIC-LIB — MSPM0 diagnostic library

MSPM0 診斷資料庫軟體開發套件 (SDK) 是一系列功能安全軟體，可協助客戶滿足功能安全診斷需求。

支援產品和硬體
開發模組 (EVM) 的 GUI

MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0

MSPM0 類比配置器是一款圖形配置工具，旨在使用 MSPM0 裝置簡化和加速類比訊號鏈的設計和實現，無需進行傳統的程式碼開發。

此工具使用直覺式 GUI，透過 MSPM0 裝置的高類比整合配置訊號鏈，即時分析和繪製訊號，並產生快閃裝置所需的配置和程式碼。

支援產品和硬體
軟體程式設計工具

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
設計工具

MSP-3P-SEARCH — MSP 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

支援產品和硬體
參考設計

TIDA-010262 — 具有資料線供電能力的 10BASE-T1L 四埠單對乙太網路參考設計

此參考設計展現乙太網路閘道，可做為四個配備資料線供電 (PoDL) 和 1000BASE-T 乙太網路埠的 10BASE-T1L 單對乙太網路 (SPE) 埠間的橋接器使用。四個 SPE 埠可用作電源設備 (PSE)，爲實地裝置提供 24V 電壓。閘道由 AM6442 微處理器控制，並使用 Linux® 作業系統，其可以是靈活且可擴展的開放原始碼軟體。

支援產品和硬體
參考設計

TIDA-050026-23881 — 適合多埠應用的 24 埠 (PoE 2、4 對) 電源設備參考設計

此參考設計展示了適合乙太網路供電 (PoE) 應用的 Type-4（PoE 2，4 對）24 埠乙太網路交換器，其針對 IEEE 802.3bt (PoE 2) 應用，每埠可傳送高達 90W，而針對非標準應用，每埠最高可傳送 120W。基於 MSP430F523x 系列與 MSPM0G1107x 系列之基礎，我們適用於此設計的 FirmPSE 系統軟體可透過與系統即時通訊和韌體自訂，縮短上市時間並釋放寶貴的軟體資源。此設計支援優先級電源管理、多電源供應器、舊版 PD 偵測、現場可升級性、與主機的 UART/I2C 通訊等。此外，其中兩種設計可透過邊緣連接器串聯，以支援多達 48 埠的 PSE (...)

支援產品和硬體
參考設計

TIDA-050026-23882 — 適合多埠應用的 24 埠 (PoE 2、2 對) 電源設備參考設計；

此參考設計展示了適合乙太網路供電 (PoE) 應用的 Type-3、30W、2 對 24 埠乙太網路交換器，其針對 IEEE 802.3bt Type 3 應用，每埠可傳送高達 30W，而針對非標準應用，則每埠最高可傳送 60W。以 MSP430F523x 系列和 MSPM0G1107x 系列為基礎，TI 的 TPS2388x FirmPSE 系統韌體提供用於多埠應用的整體系統級解決方案，減少上市時間並釋放寶貴的軟體資源。此設計支援優先級連接埠電源管理、多電源供應器、舊版 PD 偵測、現場可升級性、與主機的 UART/I2C 通訊等。此設計的 TI FirmPSE 系統韌體 GUI (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 28 Ultra Librarian
LQFP (PM) 64 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian
DSBGA (YCJ) 28 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
LQFP (PT) 48 Ultra Librarian
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片