The AWR1843 device is an integrated single-chip FMCW radar sensor capable of operation in the 76 to 81GHz band. The device is built with TI’s low-power 45nm RFCMOS process and enables unprecedented levels of integration in an extremely small form factor. The AWR1843 is an ideal solution for low-power, self-monitored, ultra-accurate radar systems in the automotive space.
The AWR1843 device is a self-contained FMCW radar sensor single-chip solution that simplifies the implementation of Automotive Radar sensors in the band of 76 to 81GHz. It is built on TI’s low-power 45nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLL and ADC converters. It integrates the DSP subsystem, which contains TI’s high-performance C674x DSP for the Radar Signal processing. The device includes a BIST processor subsystem, which is responsible for radio configuration, control, and calibration. Additionally the device includes a user programmable ARM R4F based for automotive interfacing. The Hardware Accelerator block (HWA) can perform radar processing and can help save MIPS on the DSP for higher level algorithms. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as a complete platform solution including TI reference designs, software drivers, sample configurations, API guides, and user documentation.
造訪 TI 開發人員區以開始進行評估及開發。
為 AWR1843 尋找可用的電源供應解決方案。TI 提供適用於 TI 與非 TI 之系統單晶片 (SoC)、處理器、微控制器、感測器或現場可編程邏輯閘陣列 (FPGA) 的電源供應解決方案。
AWR1843 BoosterPack™ 外掛模組是一款易於使用的 77GHz mmWave 感測器評估板，適用於單晶片 AWR1843 裝田置，且可直接連接至 TI MCU LaunchPad™ 開發套件生態系統。
BoosterPack™ 包含著手開發用於晶片內建 C67x DSP 核心及低功耗 ARM® R4F 控制器之軟體所需的一切功能，包括用於編程與偵錯的板載模擬功能，以及可快速整合簡易使用者介面的板載按鈕與 LED 之功能。
此套件受 mmWave 工具和軟體支援，包含 mmWave Studio (MMWAVE-STUDIO) 和 mmWave 軟體開發套件 (...)
DCA1000 評估模組 (EVM) 可針對來自 TI AWR 和 IWR 雷達感測器 EVM 的雙通道和四通道低電壓差動訊號 (LVDS) 流量，提供即時數據擷取和串流功能。數據可透過 1-Gbps 乙太網路即時串流到執行 MMWAVE-Studio 工具的 PC，以進行擷取、視覺化，然後可傳送至選擇的應用，以處理數據和開發演算法。
D3 Embedded 推出的微型感測器、感測器評估板和感測器融合裝置，可運用我們的 mmWave 雷達技術快速評估 D3 Embedded 雷達模組。這些感測器可輕鬆整合針對工業應用的雷達演算法。產品範圍包括彈性 60GHz 與 77GHz 模組、封裝微型天線 (AoP) 60GHz 與 77GHz 模組，以及玻璃纖維 60GHz（未來包括 77GHz）微型天線模組。
德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。 對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。
德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)
XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。
XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)
XDS560v2 是 XDS560™ 偵錯探測器系列的最高性能表現，支援傳統 JTAG 標準 (IEEE1149.1) 和 cJTAG (IEEE1149.7)。請注意，序列線偵錯 (SWD) 不受支援。
所有 XDS 偵錯探測器均支援所有具有嵌入式追踪緩衝區 (ETB) 的 ARM 和 DSP 處理器中的核心和系統追蹤功能。對於針腳追蹤則需要 XDS560v2 PRO TRACE。
XDS560v2 透過 MIPI HSPT 60 針腳接頭 (具有用於 TI 14 針腳、TI 20 針腳和 ARM 20 針腳的多轉接器) 連接到目標電路板，並透過 USB2.0 高速 (480Mbps) (...)
The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).
All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)
重要：XDS560v2 PRO TRACE 接收器為一舊型產品，其支援 TI 處理器的引腳追蹤功能。對於新裝置，建議使用第三方追蹤接收器。
XDS560v2 PRO TRACE 接收器具備與 XDS560v2 系統追蹤系列（USB 版本、USB 與乙太網路版本）相同的功能，並在其大型外部記憶體緩衝區中新增對核心接腳追蹤（指令與資料）的支援。此外部記憶體緩衝區適用於特定 TI 裝置，能擷取處理器或核心執行的所有指令，以便分析嵌入式系統中難以發現的問題。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。
XDS560v2 (...)
TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)
77GHz 3D 波導天線 4Tx4R - RF 無需基板解決方案系列
HUBER+SUHNER 開發並製造了第二代 3D 金屬化塑膠波導天線，專為 RF 無需基板解決方案設計。這項以專屬介面實現的尖端技術，支援新一代高密度封裝發射 (LOP) 單體微波積體電路 (MMIC)，以 4TX、4RX 配置通道涵蓋完整的車用 77GHz 雷達頻帶（76GHz 至 81GHz），且具備 125mm2 的小巧連接埠面積。天線設計可大幅縮減 MMIC 封裝尺寸，同時強化傳輸功率、接收器靈敏度，並維持高隔離等級，即使組裝公差偏大也不例外。
Gapwaves offers high-performance, low-loss, and cost-efficient waveguide antennas for short-, mid- and long-range automotive radars and industrial applications. Our antennas feature a flexible design and a compact form factor, robust contact-free PCB integration and support contact-free LoP (...)
VX1000 硬體能讓 CANape 等量測與校準工具以高效能且對執行階段影響極小的方式存取 ECU。此硬體專為車用設計，但亦可應用於測試平台與實驗室環境。憑藉其高度擴展性與廣泛的產品組合，VX1000 硬體能為各種應用場景提供合適的解決方案。
該系統由兩大主要元件組成：基礎模組與插接裝置。VX1000 系列支援多種控制器，包括 Sitara 系列（AM263、AM263P、AM275）、Jacinto 系列 (TDA4)、AWR1843、AWR2944、MSPM0x 及 TM4C129。JTAG、SWD、Aurora 與 Nexus-Aux 是 VX1000 可直接支援的主流控制器介面。
The mmWave software development kit (SDK) is a collection of software packages to enable application evaluation and development on TI mmWave sensors. This tool includes the MMWAVE-SDK and companion packages to support your design needs.
The MMWAVE-SDK is a unified software platform for the TI (...)
此解決方案設計可與我們的 AWR2944 雷達感知器整合，使開發人員能結合高效能雷達硬體與 Provizio 的 MIMSO 主動式天線及處理技術。MIMSO 與 AWR2944 型雷達系統配對時，可透過提供更高解析度的雷達感知，協助加速自動與進階駕駛輔助應用的開發，同時維持系統成本效率。
The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.
The Safety Compiler Qualification Kit:
The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.
The Safety Compiler Qualification Kit:
The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.
The Safety Compiler Qualification Kit:
CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)
MMWAVE-STUDIO is a stand-alone Windows® GUI that provides the ability to configure and control mmWave sensor modules and collect analog-to-digital (ADC) data for offline analysis. ADC data capture is intended to enable evaluation and characterization of radio-frequency (RF) performance, (...)
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
MathWorks 雷達工具箱：用於設計、模擬、分析和測試多功能雷達系統的演算法和工具。
感測器融合與追蹤工具箱：設計、模擬和測試多感測器追蹤和定位系統。
TI 定義了 3 種類別的第三方解決方案，滿足不同層級的需求：
此設計還可透過同時開啟所有三個傳送 (3TX) 運作來傳送 (TX) 波束成形。也可透過使用 6 位元 TX 相移器來支援波束控制，以方位角方向將波束轉向不同角度。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCCSP (ABL) | 161 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。
Windows Installer for C7000 CQKIT
Instrumented C7000 CGT Binaries for 64-bit Linux
Instrumented C7000 CGT Binaries for 64-bit Windows
Validation Results for C7000 CGT
Coverage Testing User Guide for C7000 CQKIT
For missing artifacts, contact safeti_cqkit_data@ti.com
The C7000 Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI C7000 C/C++ Compiler to functional safety standards such as IEC 61508, ISO 26262, and EN 50657.
For missing artifacts, contact safeti_cqkit_data@ti.com
The C2000 Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI C2000 C/C++ Compiler to functional safety standards such as IEC 61508, ISO 26262, and EN 50657.
See attached release notes
New Modules
For missing artifacts, contact safeti_cqkit_data@ti.com
The C6000 SafeTI Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI C6000 C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.
CCStudio UniFlash is a standalone tool used to program on-chip and external flash memory on TI MCUs and on-board flash memory for Sitara processors. UniFlash has a GUI, command line, and scripting interface. UniFlash is available free of charge.
None
MMWAVE_SDK v 32-bit installer and dependent tools/components for Windows Host
MMWAVE_SDK installer and dependent tools/components for Linux Host
The mmWave SDK enables the development of millimeter wave (mmWave) radar applications using TI mmWave sensors (see list of supported Platform / Devices).The SDK provides foundational components which will facilitate end users to focus on their applications.In addition, it provides few demo applications which will serve as a guide for integrating the SDK into end - user mmWave application
MMWAVE_STUDIO 02.01.01.00 installer for Windows Host
Release Notes for MMWAVE STUDIO
User Guide for MMWAVE STUDIO
Cascade Setup User Guide for MMWAVE STUDIO
Quick start guide for the DCA1000 capture card
Software Manifest of Components Inside the MMWAVE STUDIO
• IWRL6432AOP support for basic, advanced, and power tabs
• Silicon revision selector for power tab
• Additional warnings and errors added for xWR6432 to support the newest DFP released alongside device RTM.
The SysConfig tool is used configure TI software and hardware. For software configuration, SysConfig is used in conjunction with a TI SDK. For PinMux configuration, the tool may be used standalone.
檢查產品詳細資料頁面以確認支援。
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.
CCS v20 is TI’s next generation Integrated Development Environment (IDE) based on Theia IDE framework. CCS v20.4.1 uses a modified version of the Theia-IDE framework and offers a user experience similar to Visual Studio Code™.