MSP430FR6005
- Best-in-class ultrasonic water-flow measurement with ultra-low power consumption
- <100-ps differential time-of-flight (dTOF) accuracy
- High-precision time measurement resolution of 20 ps
- Ability to detect low flow rates (4-6 liters per hour)
- Approximately 4-µA current consumption with one measurement per second
- Compliant to and exceeds ISO 4064, OIML R49, and EN 1434 accuracy standards
- Ability to directly interface standard ultrasonic sensors (up to 2.5 MHz)
- Integrated analog front end – ultrasonic sensing solution (USS)
- Programmable pulse generation (PPG) to generate pulses at different frequencies
- Integrated physical interface (PHY) with low-impedance (4-Ω) output driver to control input and output channels
- High-performance high-speed 12-bit sigma-delta ADC (SDHS) with output data rates up to 8 Msps
- Programmable gain amplifier (PGA) with –6.5 dB to 30.8 dB
- High-performance phase-locked loop (PLL) with output range of 68 MHz to 80 MHz
- Low-energy accelerator (LEA)
- Operation independent of CPU
- 4KB of RAM shared with CPU
- Efficient 256-point complex FFT: Up to 40× faster than Arm Cortex-M0+ core
- Embedded microcontroller
- 16-bit RISC architecture up to 16‑MHz clock
- Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS specifications)
- Optimized ultra-low-power modes
- Active mode: approximately 120 µA/MHz
- Standby mode with real-time clock (RTC) (LPM3.5): 450 nA (1)
- Shutdown (LPM4.5): 30 nA
- Ferroelectric random access memory (FRAM)
- Up to 256KB of nonvolatile memory
- Ultra-low-power writes
- Fast write at 125 ns per word (64KB in 4 ms)
- Unified memory = program + data + storage in one space
- 1015 write cycle endurance
- Radiation resistant and nonmagnetic
- Intelligent digital peripherals
- 32-bit hardware multiplier (MPY)
- 6-channel internal DMA
- RTC with calendar and alarm functions
- Six 16-bit timers with up to seven capture/compare registers each
- 32-bit and 16-bit cyclic redundancy check (CRC)
- High-performance analog
- 16-channel analog comparator
- 12-bit SAR ADC featuring window comparator, internal reference, and sample-and-hold, up to 16 external input channels
- Integrated LCD driver with contrast control for up to 264 segments
- Multifunction input/output ports
- Accessible bit-, byte-, and word-wise (in pairs)
- Edge-selectable wake from LPM on all ports
- Programmable pullup and pulldown on all ports
- Code security and encryption
- 128- or 256-bit AES security encryption and decryption coprocessor
- Random number seed for random number generation algorithms
- IP encapsulation protects memory from external access
- FRAM provides inherent security advantages
- Enhanced serial communication
- Up to four eUSCI_A serial communication ports
- UART with automatic baud-rate detection
- IrDA encode and decode
- Up to two eUSCI_B serial communication ports
- I2C with multiple-slave addressing
- Hardware UART or I2C bootloader (BSL)
- Up to four eUSCI_A serial communication ports
- Flexible clock system
- Fixed-frequency DCO with 10 selectable factory-trimmed frequencies
- Low-power low-frequency internal clock source (VLO)
- 32-kHz crystals (LFXT)
- High-frequency crystals (HFXT)
- Development tools and software (also see Tools and Software)
- Ultrasonic Sensing Design Center graphical user interface
- Ultrasonic sensing software library
- EVM430-FR6047 water meter evaluation module
- MSP-TS430PZ100E target socket board for 100-pin package
- Free professional development environments with EnergyTrace++ technology
- MSP430Ware™ for MSP430™ microcontrollers
- Device Comparison summarizes the available device variants and package options
(1)The RTC is clocked by a 3.7-pF crystal.
The Texas Instruments MSP430FR600x family of ultrasonic sensing and measurement SoCs are powerful, highly integrated microcontrollers (MCUs) that are optimized for water and heat meters. The MSP430FR600x MCUs offer an integrated ultrasonic sensing solution (USS) module, which provides high accuracy for a wide range of flow rates. The USS module helps achieve ultra-low-power metering combined with lower system cost due to maximum integration requiring very few external components. MSP430FR600x MCUs implement a high-speed ADC-based signal acquisition followed by optimized digital signal processing using the integrated low-energy accelerator (LEA) module to deliver a high-accuracy metering solution with ultra-low power optimum for battery-powered metering applications.
The USS module includes a programmable pulse generator (PPG) and a physical interface (PHY) with a low-impedance output driver for optimum sensor excitation to deliver best results for zero-flow drift (ZFD). The module also includes a programmable gain amplifier (PGA) and a high-speed 12-bit 8-Msps sigma-delta ADC (SDHS) for accurate signal acquisition from industry-standard ultrasonic transducers.
Additionally, MSP430FR600x MCUs integrate other peripherals to improve system integration for metering. The MSP430FR600x MCUs also have an on-chip 8-mux LCD driver, an RTC, a 12-bit SAR ADC, an analog comparator, an advanced encryption accelerator (AES256), and a cyclic redundancy check (CRC) module.
MSP430FR600x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the MSP‑TS430PZ100E 100-pin target development board and EVM430‑FR6047 ultrasonic water flow meter EVM. TI also provides free software including the ultrasonic sensing design center, ultrasonic sensing software library, and MSP430Ware™ software.
TIs MSP430 ultra-low-power (ULP) FRAM microcontroller platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, letting system designers increase performance while lowering energy consumption. FRAM technology combines the low-energy fast writes, flexibility, and endurance of RAM with the nonvolatility of flash.
For complete module descriptions, see the MSP430FR58xx, MSP430FR59xx, and MSP430FR6xx Family Users Guide .
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
EVM430-FR6047 — MSP430FR6047 超音波感測評估模組
EVM430-FR6047 評估套件是評估 MSP430FR6047 MCU 性能的開發平台,適用於超音波感測應用(例如 智慧水表)。MSP430FR6047 MCU 是一款整合超音波感測類比前端 (USS) 的超低功耗裝置,可進行高精密度與準確的超音波量測。本裝置也包含低功耗加速器 (LEA),可進行最佳化訊號處理,有助於將功率最佳化以延長電池使用壽命。EVM 提供彈性解決方案,能讓工程師使用 MSP430FR6047 MCU 與 50KHz 至 2.5MHz 的各種轉換器進行快速評估與開發。EVM 能夠以板載 LCD 和 RF通訊模組連接器顯示量測參數。
ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器
μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。
在單機模式下,只要按下「開始」按鈕或透過一些 TTL 控制線,就可以執行編程週期。
其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。
MSP-TS430PZ100E — 適用於 100 針腳 MSP430FR604x MCU 的目標開發基板 (不包括微處理器)
MSP-TS430PZ100E 微控制器開發板是一個獨立的 ZIF 插座目標板,用於透過 JTAG 介面或 Spy Bi-Wire (2 線 JTAG) 協定對 MSP430 在系統進行程式設計和偵錯。此開發電路板支援採用 80 針腳 QFP 封裝的所有 MSP430FR604x FRAM 裝置(TI 封裝代碼:PZ)。請檢查目標的裝置文件,尋找正確的目標電路板。
偵錯探針可單獨購買或與目標電路板 (MSP-FET) 搭售。
MSP-FET — MSP MCU 程式設計工具和偵錯器
MSP-FET 是一款強大的模擬開發工具,通常稱為偵錯探測器,可讓使用者快速展開 MSP 低功耗微控制器 (MCU) 的開始工作。
它支援透過 JTAG 和 SBW 介面進行編程和即時偵錯。此外,MSP-FET 也能在電腦 USB 介面與 MSP UART 間提供後通道 UART 連接。這為 MSP 程式設計工具提供了一種便利的方法,能在 MSP 和電腦上執行的終端之間進行串行通訊。它也支援透過 UART 和 I2C 通訊協定,使用 BSL(自舉式載入程式)將程式(通常稱為韌體)載入到 MSP 目標。
USB 介面可將 MSP-FET 連接至電腦,而 14 針腳連接器則可存取 MSP (...)
ALGO-3P-WRITENOW — Algocraft WriteNow!程式設計工具
WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧,便於整合至 ATE 與固定裝置。編程器可單機運作,或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線,並隨附操作簡易的工具軟體。
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
MSP430-ACADEMY — MSP430™ academy
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS
SAFERTOS® 是專為嵌入式處理器設計的獨特即時作業系統。經 TÜV SÜD 預先認證,符合 IEC 61508 SIL3 與 ISO 26262 ASILD 標準。SAFERTOS® 是由 WHIS 專家團隊專為安全而打造,適用於全球重要安全應用。WHIS 與德州儀器的合作已經超過十年。在此期間,WHIS 已將 SAFERTOS® 移植至各種 TI 處理器,支援所有熱門核心,並可依要求提供其他架構。SAFERTOS® 專為您的特定處理器/編譯器組合量身打造,隨附完整的原始程式碼與設計保證包,可完全一目了然整個設計生命週期。許多 WHIS 客戶開始使用 FreeRTOS (...)
USS-SWLIB-WATER — Ultrasonic sensing solution (USS) software library for water metering
超音波設計中心是使用 MSP430TM 微控制器 (MCU) 開發超音波感測應用的一站式資源,其中包含工具、圖形使用者介面 (GUI)、說明文件、軟體程式庫和應用範例。開發人員可以快速配置與自訂與超音波應用相關的轉換器與波形擷取參數。
水計量
MSP430 MCU 超音波感測解決方案 (USS) 軟體庫 (MSP-USSSWLIB_Water) 協助配置 MSP430FR604x 系列裝置中的類比前端 (AFE) 以進行超音波擷取,並與應用程式軟體整合以開發超音波水流計量計。該庫還利用 MSP430FR604x MCU 系列中的低能量加速器 (LEA) 模組來計算飛時測距 (TOF) (...)
MSPFRBOOT — MSPFRBOOT
MSP430™ 微控制器 (MCU) 上的開機載入程式 (BSL) 允許使用者在原型設計階段、最終生產和實際運作中,與 MSP MCU 內的嵌入式記憶體進行通訊。這可透過 UART、I2C、SPI 和 USB 等標準介面進行。可編程記憶體 (快閃記憶體/FRAM) 和資料記憶體 (RAM) 皆可視需要修改。
以下是在 MSP 產品組合中了解和有效使用 MSPBSL 所需的步驟。如需了解您裝置上的 BSL 支援哪些功能,或是與 BSL 通訊所需介面方法的最新資訊,請參閱「表 1.BSL 功能概覽」,其包含在步驟 1 中連結的 BSL 使用者指南中。
STEP 1:了解 MSP 開機載入程式 (...)
MSP-GANG-SOFTWARE — MSP-GANG Software
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分,是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄,以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面,並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行,或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意,mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
MSP-3P-SEARCH — MSP 第三方搜尋工具
TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.
(...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| LQFP (PZ) | 100 | Ultra Librarian |