首頁 無線連線 低耗電 2.4GHz 產品
首頁
無線連線
低耗電 2.4GHz 產品

CC2652R7

現行

具 704-kB 快閃記憶體的 SimpleLink™ Arm® Cortex®-M4F 多協定 2.4 GHz 無線 MCU

立即訂購
產品規格表
使用指南

CC2652R7

現行
產品規格表 立即訂購

產品詳細資料

CPU Arm® Cortex®-M4F Technology Bluetooth® LE, Multi-standard, Proprietary 2.4 GHz, Thread, Zigbee Protocols Bluetooth® Low Energy, Thread, Zigbee 3.0 Flash memory (kByte) 704 RAM (kByte) 152 Peripherals 2 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Features Direction finding, OAD, Sleepy end device, Zigbee coordinator, Zigbee network processor Number of GPIOs 31 Security Cryptographic acceleration, Device attestation & anti-counterfeit, Secure boot, Secure debug, Secure firmware & software update Cryptographic accelerators RNG Operating system FreeRTOS, TI RTOS Type Wireless MCU Sensitivity (best) (dBm) -104 Operating temperature range (°C) -40 to 105 Edge AI enabled No
CPU Arm® Cortex®-M4F Technology Bluetooth® LE, Multi-standard, Proprietary 2.4 GHz, Thread, Zigbee Protocols Bluetooth® Low Energy, Thread, Zigbee 3.0 Flash memory (kByte) 704 RAM (kByte) 152 Peripherals 2 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Features Direction finding, OAD, Sleepy end device, Zigbee coordinator, Zigbee network processor Number of GPIOs 31 Security Cryptographic acceleration, Device attestation & anti-counterfeit, Secure boot, Secure debug, Secure firmware & software update Cryptographic accelerators RNG Operating system FreeRTOS, TI RTOS Type Wireless MCU Sensitivity (best) (dBm) -104 Operating temperature range (°C) -40 to 105 Edge AI enabled No
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4F processor
  • 704KB flash program memory
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM
  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4KB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.10 mA active mode, CoreMark
    • 65 µA/MHz running CoreMark
    • 0.9 µA standby mode, RTC, 144KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption:
    • 29.2 µA in 2 MHz mode
    • 799 µA in 24 MHz mode
  • Radio Consumption:
    • 6.4 mA RX
    • 7.3 mA TX at 0 dBm
    • 9.7 mA TX at +5 dBm

Wireless protocol support

High performance radio

  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +5 dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • ETSI EN 300 328, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Two UART, two SSI, I 2C, I 2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128- and 256-bit cryptographic accelerator
  • ECC and RSA public key hardware accelerator
  • SHA2 Accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • 1.7-V to 1.95-V external regulator mode
  • -40 to +105°C

Package

  • 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4F processor
  • 704KB flash program memory
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM
  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4KB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.10 mA active mode, CoreMark
    • 65 µA/MHz running CoreMark
    • 0.9 µA standby mode, RTC, 144KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption:
    • 29.2 µA in 2 MHz mode
    • 799 µA in 24 MHz mode
  • Radio Consumption:
    • 6.4 mA RX
    • 7.3 mA TX at 0 dBm
    • 9.7 mA TX at +5 dBm

Wireless protocol support

High performance radio

  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +5 dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • ETSI EN 300 328, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Two UART, two SSI, I 2C, I 2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128- and 256-bit cryptographic accelerator
  • ECC and RSA public key hardware accelerator
  • SHA2 Accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • 1.7-V to 1.95-V external regulator mode
  • -40 to +105°C

Package

  • 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
  • RoHS-compliant package

The SimpleLink™ CC2652R7 device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Matter, Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC2652R7 is based on an Arm ® Cortex ® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC2652R7 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. PHY and frequency switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC2652R7 supports +5 dBm TX at 9.7 mA in the 2.4-GHz band. CC2652R7 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.

The CC2652R7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.

The CC2652R7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC2652R7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC2652R7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

The SimpleLink™ CC2652R7 device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Matter, Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC2652R7 is based on an Arm ® Cortex ® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC2652R7 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. PHY and frequency switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC2652R7 supports +5 dBm TX at 9.7 mA in the 2.4-GHz band. CC2652R7 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.

The CC2652R7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.

The CC2652R7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC2652R7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC2652R7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
filter 尋找其它 低耗電 2.4GHz 產品
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
CC2642R 現行 具有 352kB 快閃記憶體的 SimpleLink™ 32 位元 Arm Cortex-M4F Bluetooth® 低耗能無線 MCU Pin-to-pin compatible with reduced flash and RAM
CC2652R 現行 具有 352kB 快閃記憶體的 SimpleLink™ 32 位元 Arm Cortex-M4F 多協定 2.4 GHz 無線 MCU Pin-to-pin compatible with reduced flash and RAM
CC2674R10 現行 具 1-MB 快閃記憶體的 SimpleLink™ Arm® Cortex®-M33 多協定 2.4-GHz 無線 MCU Pin-to-pin upgrade with increased flash and RAM

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 55
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 CC2652R7 SimpleLink™ Multiprotocol 2.4 GHz Wireless MCU datasheet (Rev. B) PDF | HTML 2023/3/21
* 使用指南 CC13x2x7 and CC26x2x7 Technical Reference Manual PDF | HTML 2021/11/24
* 勘誤表 CC2652R7 Silicon Errata (Rev. A) PDF | HTML 2021/11/30
應用說明 Configuration methods for BQB RF-PHY testing and SRRC fixed frequency testing for TI Bluetooth products (Rev. A) PDF | HTML 2026/5/29
網路安全諮詢 Invalid Bluetooth® LE Data Length Extension (DLE) Parameter Leading to DoS PDF | HTML 2026/5/28
網路安全諮詢 Denial of Service during Bluetooth LE authentication and connection PDF | HTML 2026/5/28
應用說明 How to Certify Your Bluetooth Product (Rev. N) PDF | HTML 2025/11/18
應用說明 CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E) PDF | HTML 2024/8/6
應用說明 CC13xx/CC26xx Hardware Configuration and PCB Design Considerations (Rev. H) PDF | HTML 2024/5/2
技術文章 Two wireless trends that Matter in home automation PDF | HTML 2022/10/27
應用說明 CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A) PDF | HTML 2022/10/20
應用說明 How to Do RF Radio Test With Your Bluetooth Product (Rev. A) PDF | HTML 2022/8/4
應用說明 Antenna Impedance Measurement and Matching PDF | HTML 2022/3/22
選擇指南 無線連線技術選擇指南 (Rev. B) Download English Version (Rev.B) 2022/3/7
應用說明 Configuring Bluetooth LE devices for Direct Test Mode PDF | HTML 2022/2/25
應用說明 TI Bluetooth® Mesh Software Product Brief PDF | HTML 2021/12/17
應用說明 Hardware Migration to CC2652R7 and CC2652P7 PDF | HTML 2021/11/10
應用說明 Hardware Migration From CC26x0 to CC26x2R (Rev. D) 2021/8/23
技術文章 Seamlessly connect your world with 16 new wireless MCUs for the 2.4-GHz and Sub-1- PDF | HTML 2021/6/4
Application brief Dynamic Multi-protocol Manager (DMM) Tech Note (Rev. A) PDF | HTML 2021/5/13
技術文章 An FAQ about the Matter connectivity standard PDF | HTML 2021/5/11
白皮書 Dynamic Multi-Protocol (DMM) Performance 2021/4/21
白皮書 Exploring Thread and Zigbee for home and building automation PDF | HTML 2021/4/12
網路安全諮詢 Bluetooth Low Energy – Invalid Connection Request (SweynTooth) (Rev. A) PDF | HTML 2020/7/17
網路安全諮詢 Variable Time Tag Comparison on SimpleLink™ Devices PDF | HTML 2020/6/5
網路安全諮詢 Bluetooth Low Energy, Basic Rate/Enhanced Data Rate – Method Confusion Pairing V PDF | HTML 2020/5/18
應用說明 Cloning Z-Stack Network Properties Using the SimpleLink Wireless MCU Family PDF | HTML 2020/3/31
應用說明 SimpleLink WLAN Access Point (Rev. A) PDF | HTML 2020/3/16
應用說明 Z-Stack Large Mesh Network Performance Using the SimpleLink™ Wireless MCU Family (Rev. B) PDF | HTML 2020/2/5
應用說明 Cryptographic Performance and Energy Efficiency on SimpleLink CC13x2/CC26x2 MCUs PDF | HTML 2020/1/28
應用說明 Ultra-Low Power Sensing Applications With CC13x2/CC26x2 (Rev. B) PDF | HTML 2020/1/27
白皮書 Simple and efficient software development with the SimpleLink™ MCU platform (Rev. E) 2019/12/6
白皮書 Exploring IoT wireless connectivity in mechanical shock and vibration environme 2019/11/7
白皮書 Deep dive into the tools and development kits of the SimpleLink™ MCU platform (Rev. B) 2019/9/25
應用說明 Running Bluetooth® Low Energy on CC13x2/CC26xx Without a 32 kHz Crystal (Rev. C) PDF | HTML 2019/9/23
更多文件說明 Understanding security features for SimpleLink™ Zigbee CC13x2 and CC26x2 Wireles 2019/6/17
Application brief What's New in Zigbee 3.0 (Rev. A) PDF | HTML 2019/6/6
應用說明 Bluetooth® Low Energy Tree Structure Network PDF | HTML 2019/5/29
應用說明 Debugging Communication Range (Rev. A) PDF | HTML 2019/5/23
應用說明 Z-Stack End Dev Pwr Cons Measuremen w/ the SimpleLink™ Wireless MCU Family (Rev. B) PDF | HTML 2019/5/17
應用說明 Secure Boot in SimpleLink™ CC13x2/CC26x2 Wireless MCUs PDF | HTML 2019/4/15
白皮書 SimpleLink Crystal-Less Wireless MCU based on TI BAW technology 2019/2/18
Product overview Out-of-box star-network solution: TI 15.4-Stack 2019/1/14
應用說明 Measuring CC13xx and CC26xx current consumption (Rev. D) PDF | HTML 2019/1/10
應用說明 RF PCB Simulation Cookbook 2019/1/9
Product overview Meet the SimpleLink™ Sensor Controller 2019/1/4
Product overview Time Multiplexing: Concurrent Multi-standard Operation 2019/1/3
白皮書 Migrating your proprietary solution to the SimpleLink™ WMCU 2018/11/7
Product overview Electronic Smart Locks: Ultra-low power and Multi-Standard operation 2018/11/5
應用說明 Low-Power ADC Solution for CC13x2 and CC26x2 2018/3/2
白皮書 Thread and Zigbee for home and building automation 2018/3/1
Application brief Ultra-Low Power Designs With the CC13x2 and CC26x2 Sensor Controller PDF | HTML 2018/2/27
應用說明 Use of Low-power Zigbee® and Thread With the SimpleLink™ Wireless MCU Family 2018/2/27
應用說明 Sensor Sequencing Using the CC13x2 and CC26x2 Sensor Controller 2017/3/5
應用說明 TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) 2017/2/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP-CC2652R7 — 適用 SimpleLink™ 多標準無線 MCU 的 CC2652R7 LaunchPad™ 開發套件

這款 LaunchPad™ 用於加快 SimpleLink™ 多重標準 CC2652R7 無線 MCU 的開發，支援 Bluetooth®、Zigbee® 和 Thread。  軟體支援由 SIMPLELINK-LOWPOWER-SDK 軟體開發套件提供。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
開發套件

AMZN-3P-SIDEWALK-TOOLKIT — Amazon Sidewalk 開發工具套件

Amazon Sidewalk 是能夠涵蓋居家內部、建物內部、整個鄰近區域，甚至整個城市使用案例的安全可靠社區網路，運用相容 Amazon Echo 與 Ring 裝置等 Amazon Sidewalk 橋接器，為 IoT 裝置提供雲端連線能力。Amazon Sidewalk 採用適合短距離通訊的 Bluetooth® 低耗能技術，以及適合長距離通訊的 Sub-1 GHz 915 MHz 頻率，在家中和外面都能實現低頻寬與長距離連線。Amazon Sidewalk 運用數百萬參與的 Sidewalk (...)

從：Amazon
支援產品和硬體
開發套件

RFSTAR-3P-CC2652-MODULES — 以 CC2652R CC2652R7 CC2652P CC2652P7 為基礎的 RFSTAR 多協定無線模組

RF-star 超過十年來均是 TI 的無線連線模組第三方 IDH，專門供應以 TI 產品為基礎的各種無線模組及解決方案，例如 BLE、Matter、ZigBee、Thread、Wi-Fi、Sub-1G 與 Wi-SUN。 
RF-BM-2652B1 無線模組是以 CC2652R 為基礎、RF-BM-2652B2 是以 CC2652R7 為基礎、RF-BM-2652P2(I) 系列是以 CC2652P為基礎，而 RF-BM-2652P4(I) 則是以 CC2652P7 為基礎，這些 SimpleLink 多協定 2.4 GHz 無線模組均支援 Matter (僅限 (...)

從：Shenzhen RF-star Technology Co., Ltd.
支援產品和硬體
偵錯探測器

LB-3P-TRACE32-WIRELESS — 適用於無線連線的 Lauterbach TRACE32® 偵錯系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證 TI 許多無線連線晶片。全球知名的嵌入式系統偵錯解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段：   完整的晶片內建斷點支援；執行階段記憶體存取；快閃記憶體編程和基準計數器。所有內容都是可編寫指令碼，使開發人員能夠一再地重複相同的測試順序。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。經認證的工具資格認證支援套件 (TQSK) 提供便利的全方位方式，鑒定 (...)

從：Lauterbach GmbH
支援產品和硬體
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
軟體開發套件 (SDK)

SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices

SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。

支援產品和硬體
軟體開發套件 (SDK)

SIMPLELINK-MATTER — SimpleLink™ family of devices Matter software

SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。

支援產品和硬體
軟體開發套件 (SDK)

SIMPLELINK-TI-OPENTHREAD-SDK — SimpleLink™ family of devices OpenThread software

This Texas Instruments OpenThread GitHub repository (ot-ti) contains all the software development components and tools that enable engineers to develop Thread based products.
支援產品和硬體
軟體開發套件 (SDK)

TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit

The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ARM-CGT — Arm® 程式碼產生工具 - 編譯器

The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.

The current tools ARM-CGT-CLANG are derived from the (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
支援產品和硬體
IDE、配置、編譯器或偵錯程式

SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio

Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
線上培訓

SIMPLELINK-ACADEMY-CC13XX-CC26XX — SimpleLink™ CC13xx and CC26xx Academy

SimpleLink™ Academy is an interactive learning experience for TI's wireless protocols. Our hands-on training modules cover all phases of development for LaunchPad™ development kits alongside software development kits (SDKs) in the SimpleLink MCU family.
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
應用軟體及架構

SIMPLELINK-CONNECT — SimpleLink Connect App for the SimpleLink Low Power SDKs

SimpleLink Connect 行動應用程式是 Bluetooth® 低功耗應用範例，適用於搭配以下項目的行動裝置：

  • 執行 SIMPLELINK-LOWPOWER-SDK 的 CC23XX 裝置
  • 連接至執行 CC33XX-SOFTWARE 之主機的 CC33xx 裝置

應用程式提供了基準，讓使用者可使用 iOS 或 Android 快速建置自己的行動應用程式。提供原始碼，便於客製化。

支援產品和硬體
計算工具

BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices

This tool is used to calculate Bluetooth Low Energy power consumption estimates for various use cases on TI Bluetooth devices. The calculator includes both advertising and peripheral use cases with the ability to configure different use case profile parameters. The calculator outputs an estimate (...)
支援產品和硬體
計算工具

PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

支援產品和硬體
計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置：

 

資源

支援產品和硬體
設計工具

SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。一個簡單的三步驟流程用於請求審查，以及相關技術文件和資源的連結，可在此處找到。

入門指南

一般設計問題應張貼在我們的 E2E 討論區中，然後才能要求 2.4 GHz 硬體設計審查。

請確實備妥下列必要文件，隨硬體設計審查申請表一起傳送：

  • 確認產品頁上提供的所有硬體文件均已經過審查，例如產品規格表、設計指南、使用指南和其他硬體資源
  • 電路圖的可攜式文件格式 (PDF) 版本可供檢閱
  • 物料清單 (BOM) 可供檢閱
  • 堆疊詳細資料可供檢閱
  • 電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGZ) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片