TM4C1294NCPDT
具有 120-MHZ、1-MB 快閃記憶體、256-KB RAM、USB、ENET MAC+PHY 的 32 位元 Arm Cortex-M4F 架構 MCU
TM4C1294NCPDT
- Performance
- ARM® Cortex™-M4F processor core
- 120-MHz operation; 150 DMIPS performance
- 1024 KB Flash memory
- 256 KB single-cycle System SRAM
- 6KB of EEPROM
- Internal ROM loaded with TivaWare™ for C Series software
- 8-/16-/32- bit dedicated External Peripheral Interface (EPI) for peripherals and memory
- Security
- Cyclical Redundancy Check (CRC) hardware with 16-/32-bit Hash function that supports four CRC forms
- Support for four tamper inputs and configurable tamper event response
- Communication Interfaces
- Eight Universal Asynchronous Receivers/Transmitters (UARTs)
- Four Quad Synchronous Serial Interface (QSSI) modules with Bi-, Quad- and advanced SSI support
- Ten Inter-Integrated Circuit (I2C) modules with four transmission speeds including high-speed mode
- Two Controller Area Network (CAN) 2.0 A/B controllers
- 10/100 Ethernet MAC
- Ethernet PHY with IEEE 1588 PTP hardware support
- Universal Serial Bus (USB) 2.0 OTG/Host/Device with ULPI interface option and Link Power Management (LPM) support
- System Integration
- ARM® PrimeCell® 32-channel configurable Micro Direct Memory Access (µDMA) controller
- Eight 16/32-bit General-Purpose Timer (GPTM) blocks
- Two watchdog timers
- Low-power battery-backed Hibernation module
- 15 physical General-Purpose Input/Output (GPIO) blocks
- Advanced Motion Control
- One Pulse Width Modulator (PWM) module, with four PWM generator blocks and a control block, for a total of 8 PWM outputs
- One Quadrature Encoder Interface (QEI) module
- Analog Support
- Two 12-bit Analog-to-Digital Converter (ADC) modules, each with a maximum sample rate of one million samples/second
- Three independent integrated analog comparators
- 16 digital comparators
- One JTAG module with integrated ARM Serial Wire Debug (SWD)
- 128-pin TQFP package
- Operating Range (Ambient)
- Industrial (-40°C to 85°C) temperature range
- Extended (-40°C to 105°C) temperature range
Tiva™ C Series microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical, real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human machine interface to networked system management controllers.
In addition, Tiva™ C Series microcontrollers offer the advantages of ARM's widely available development tools, System-on-Chip (SoC) infrastructure, and a large user community. Additionally, these microcontrollers use ARM's Thumb®-compatible Thumb-2 instruction set to reduce memory requirements and, thereby, cost. Finally, the TM4C1294NCPDT microcontroller is code-compatible to all members of the extensive Tiva™ C Series, providing flexibility to fit precise needs.
Texas Instruments offers a complete solution to get to market quickly, with evaluation and development boards, white papers and application notes, an easy-to-use peripheral driver library, and a strong support, sales, and distributor network.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AWR2544LOPEVM — 適用於車用第二代、76GHz 至 81GHz、高效能 SoC 的 AWR2544LOP 評估模組
AWR2944EVM — 適用車用第二代、76-GHz 至 81-GHz 高效能 SoC 的 AWR2944 評估模組
AWR2944 評估模組 (EVM) 是一款易於使用的平台,可評估 AWR2944 mmWave 晶片系統 (SoC) 雷達感測器,可與 DCA1000EVM (另售) 直接連線。
AWR2944EVM 套件包含開始為晶片內建 C66x 數位訊號處理器 (DSP)、Arm® Cortex®-R5F 控制器和硬體加速器 (HWA 2.0) 開發軟體的一切所需。
此外也包含適用編程和偵錯的板載模擬,以及板載按鈕和 LED,以快速整合簡單的使用者介面。
AWR2E44PEVM — AWR2E44P 評估模組
AWRL1432BOOST-BSD — 適用於盲點偵測的 AWRL1432 單晶片 mmWave 感測器評估板
AWRL1432BOOST-BSD 是一款易於使用的 70GHz mmWave 感測器評估套件,以具有板載 ROGERS RO3003 高性能天線的 AWRL1432 裝置為基礎。此電路板可存取點雲資料及 USB 供電介面。AWRL1432BOOST-BSD 支援與 DCA1000EVM 開發套件直接連接。AWRL1432BOOST-BSD 也具有適用於汽車應用的 12V 供電 TCAN4550。
此套件受 mmWave 工具、示範與軟體支援,包括 mmWave 軟體開發套件 (mmwave_mcuplus_sdk) 和 TI 的 Code Composer Studio (...)
EK-TM4C1294XL — 基於 ARM® Cortex®-M4F 的 MCU TM4C1294 Connected LaunchPad™ 評估套件
TM4C1294 Connected LaunchPad 評估套件是適用於 Arm® Cortex-M4F 架構微控制器 (MCU) 的低成本開發平台。Connected LaunchPad 設計重點在於 TM4C1294NCPDT MCU,其晶片內建 10/100 Ethernet 媒體存取控制 (MAC) 與實體層 (PHY)、USB 2.0、休眠模組、動作控制脈衝寬度調變,以及多種同步序列連線。
EK-TM4C129EXL — 適用於物聯網應用的 ARM® Cortex®-M4F 架構 MCU TM4C129E Crypto Connected LaunchPad™
由具備硬體加密加速器的 MCU 提供動力,Crypto Connected LaunchPad 可讓您開發從安全雲端連線、建築/工廠自動化與智慧電網到工業控制的高性能、具備資料保護的連網 IoT 應用。
TM4C129E Crypto Connected LaunchPad 評估套件是適用於 ARM® Cortex-M4 架構微控制器的低成本平台。套件設計重點在於 TM4C129ENCPDT MCU,晶片內建加密加速硬體、10/100 乙太網路 MAC 與 PHY、USB 2.0、休眠模組、動作控制脈衝寬度調變與多種同步序列連線。
加密連線 LaunchPad 的開箱即用示範 (...)
IWRL1432BOOST-BSD — 具有低功率 76-GHz 至 81-GHz 工業雷達感測器且適用於 BSD 的 IWRL1432 評估模組
IWRL1432BOOST-BSD 是一款易於使用的 77GHz mmWave 感測器評估套件,以具有板載 ROGERS RO3003 高性能天線的 IWRL1432 裝置為基礎。此電路板可存取點雲資料及 USB 供電介面。IWRL1432BOOST-BSD 還具有一個 12V 操作的 TCAN4550,適用於需要此介面的應用。
TMDSCNCD263P — AM263Px 通用 controlCARD™ 開發套件 Arm® 架構 MCU
TMDSCNCD263P 是適用於 AM263Px 系列 Sitara™ 高性能微控制器的 HSEC180 controlCARD 型評估和開發工具。此電路板極適用於初始評估與原型,因為它提供標準化且使用方便的平台,可用於開發您的下一個應用程式。AM263P 控制卡配備了 Sitara AM263P4 處理器與 PMIC 型電源解決方案及其他零組件,可讓使用者使用各種裝置介面,其中包括工業乙太網路、標準乙太網路、快速序列介面 (FSI) 及其他功能,以輕鬆開發和測試應用程式。AM263P4 支援 EtherCAT、EtherNet/IP 和 PROFINET 等各種工業乙太網路通訊協定。
(...)
TMDSCNCD263P-SIP — AM263Px-SIP 控制卡評估模組
AM263Px-SIP(矽晶級封裝)控制卡評估模組 (EVM) 是一款適用於德州儀器 Sitara™ AM263Px 的評估和開發板,具有微控制器 (MCU) 的晶粒上快閃記憶體封裝。此 EVM 透過適用於編程與偵錯的板載模擬,以及可做為簡易使用者介面的按鈕與 LED,提供了可輕鬆使用 AM263Px-SIP MCU 著手開發的方式。控制卡還透過使用高速邊緣連接器 (HSEC) 基板擴充站,進行接頭接腳對關鍵訊號的存取,以實現快速原型設計。
TMDSEMU200-U — XDS200 USB 偵錯探測器
XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器(模擬器)。對於大多數裝置,建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準(IEEE1149.1、IEEE1149.7、SWD)。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。
XDS200 透過 TI 20 接腳連接器(配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器)連接到目標電路板,並透過 USB2.0 高速 (...)
TMDSEMU560V2STM-U — XDS560™ 軟體 v2 系統追蹤 USB 偵錯探測器
XDS560v2 是 XDS560™ 系列偵錯探測器中性能最高的,且同時支援傳統 JTAG 標準 (IEEE1149.1) 與 cJTAG (IEEE1149.7)。 請注意,其不支援序列線偵錯 (SWD)。
所有 XDS 偵錯探測器均在所有配備嵌入式追蹤緩衝器 (ETB) 的 ARM 與 DSP 處理器中支援核心與系統追蹤。 對於針腳上的追蹤,則需要 XDS560v2 PRO TRACE。
XDS560v2 透過 MIPI HSPT 60 針腳接頭 (具有用於 TI 14 針腳、TI 20 針腳和 ARM 20 針腳的多轉接器) 連接到目標電路板,並透過 USB2.0 高速 (...)
TMDSEMU560V2STM-UE — XDS560v2 System Trace USB 與乙太網路偵錯探測器
The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).
All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)
TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger
TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)
SW-TM4C — TivaWare for C Series Software (Complete)
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
TSK-3P-VX-TOOLSET — 適用於 Arm 的 TASKING VX 工具套件
適用於 Arm 的 VX 工具套件是一套經過認證的編譯器工具鏈,可用於指定 Cortex-M 與 Cortex-R 核心裝置的安全關鍵嵌入式軟體開發。透過整合 Eclipse IDE、進階多核心支援,以及與 TASKING BlueBox 除錯器的相容性,VX 工具套件可簡化開發流程。通過 TÜV NORD 認證,符合 ISO 26262(最高支援 ASIL D)及 ISO 21434 標準。
SW-ICDI-DRIVERS — Stellaris™ ICDI Drivers
Tiva™ C Series evaluation and reference design kits provide an integrated In-Circuit Debug Interface (ICDI) which allows programming and debugging of the onboard C Series microcontroller. The ICDI can be used with the LM Flash Programmer as well as any of the Tiva-supported toolchains such as Texas (...)
LMFLASHPROGRAMMER — 快閃記憶體程式設計工具、GUI 和命令行
LM 快閃記憶體程式設計工具是一款免費的快閃記憶體編程公用程式,適用於與德州儀器 Tiva™ C 系列和 Stellaris® 微控制器、開發板或評估板配合使用。
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分,是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄,以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面,並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行,或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意,mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
SPMC023 — LLDP Software
許多 TI 參考設計包含 TM4C1294NCPDT
使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TQFP (PDT) | 128 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。