現在提供此產品的更新版本
功能與所比較的裝置相似
MSP430FR2355
- Embedded microcontroller
- 16-bit RISC architecture up to 24 MHz
- Extended temperature: –40°C to 105°C
- Wide supply voltage range from 3.6 V down to 1.8 V (operational voltage is restricted by SVS levels, see VSVSH- and VSVSH+ in PMM, SVS and BOR)
- Optimized low-power modes (at 3 V)
- Active mode: 142 µA/MHz
- Standby:
- LPM3 with 32768-Hz crystal: 1.43 µA (with SVS enabled)
- LPM3.5 with 32768-Hz crystal: 620 nA (with SVS enabled)
- Shutdown (LPM4.5): 42 nA (with SVS disabled)
- Low-power ferroelectric RAM (FRAM)
- Up to 32KB of nonvolatile memory
- Built-in error correction code (ECC)
- Configurable write protection
- Unified memory of program, constants, and storage
- 1015 write cycle endurance
- Radiation resistant and nonmagnetic
- Ease of use
- 20KB ROM library includes driver libraries and FFT libraries
- High-performance analog
- One 12-channel 12-bit analog-to-digital converter (ADC)
- Internal shared reference (1.5, 2.0, or 2.5 V)
- Sample-and-hold 200 ksps
- Two enhanced comparators (eCOMP)
- Integrated 6-bit digital-to-analog converter (DAC) as reference voltage
- Programmable hysteresis
- Configurable high-power and low-power modes
- One with fast 100-ns response time
- One with 1-µs response time with 1.5-µA low power
- Four smart analog combo (SAC-L3) (MSP430FR235x devices only)
- Supports General-Purpose Operational Amplifier (OA)
- Rail-to-rail input and output
- Multiple input selections
- Configurable high-power and low-power modes
- Configurable PGA mode supports
- Noninverting mode: ×1, ×2, ×3, ×5, ×9, ×17, ×26, ×33
- Inverting mode: ×1, ×2, ×4, ×8, ×16, ×25, ×32
- Built-in 12-bit reference DAC for offset and bias settings
- 12-bit voltage DAC mode with optional references
- One 12-channel 12-bit analog-to-digital converter (ADC)
- Intelligent digital peripherals
- Three 16-bit timers with three capture/compare registers each (Timer_B3)
- One 16-bit timer with seven capture/compare registers each (Timer_B7)
- One 16-bit counter-only real-time clock counter (RTC)
- 16-bit cyclic redundancy checker (CRC)
- Interrupt compare controller (ICC) enabling nested hardware interrupts
- 32-bit hardware multiplier (MPY32)
- Manchester codec (MFM)
- Enhanced serial communications
- Two enhanced USCI_A (eUSCI_A) modules support UART, IrDA, and SPI
- Two enhanced USCI_B (eUSCI_B) modules support SPI and I2C
- Clock system (CS)
- On-chip 32-kHz RC oscillator (REFO)
- On-chip 24-MHz digitally controlled oscillator (DCO) with frequency locked loop (FLL)
- ±1% accuracy with on-chip reference at room temperature
- On-chip very low-frequency 10-kHz oscillator (VLO)
- On-chip high-frequency modulation oscillator (MODOSC)
- External 32-kHz crystal oscillator (LFXT)
- External high-frequency crystal oscillator up to 24 MHz (HFXT)
- Programmable MCLK prescaler of 1 to 128
- SMCLK derived from MCLK with programmable prescaler of 1, 2, 4, or 8
- General input/output and pin functionality
- 44 I/Os on 48-pin package
- 32 interrupt pins (P1, P2, P3, and P4) can wake MCU from LPMs
- Development tools and software (also see Tools and Software)
- LaunchPad™ development kit (MSP‑EXP430FR2355)
- Target development board (MSP‑TS43048PT)
- Free professional development environments
- Family members (also see Device Comparison)
- MSP430FR2355: 32KB of program FRAM, 512 bytes of data FRAM, 4KB of RAM
- MSP430FR2353: 16KB of program FRAM, 512 bytes of data FRAM, 2KB of RAM
- MSP430FR2155: 32KB of program FRAM, 512 bytes of data FRAM, 4KB of RAM
- MSP430FR2153: 16KB of program FRAM, 512 bytes of data FRAM, 2KB of RAM
- Package options
- 48-pin: LQFP (PT)
- 40-pin: VQFN (RHA)
- 38-pin: TSSOP (DBT)
- 32-pin: VQFN (RSM)
MSP430FR215x and MSP430FR235x microcontrollers (MCUs) are part of the MSP430™ MCU value line portfolio of ultra-low-power low-cost devices for sensing and measurement applications. MSP430FR235x MCUs integrate four configurable signal-chain modules called smart analog combos, each of which can be used as a 12-bit DAC or a configurable programmable-gain Op-Amp to meet the specific needs of a system while reducing the BOM and PCB size. The device also includes a 12-bit SAR ADC and two comparators. The MSP430FR215x and MSP430FR235x MCUs all support an extended temperature range from –40° up to 105°C, so higher temperature industrial applications can benefit from the devices FRAM data-logging capabilities. The extended temperature range allows developers to meet requirements of applications such as smoke detectors, sensor transmitters, and circuit breakers.
The MSP430FR215x and MSP430FR235x MCUs feature a powerful 16-bit RISC CPU, 16-bit registers, and a constant generator that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode typically in less than 10 µs.
The MSP430 ultra-low-power (ULP) FRAM microcontroller platform combines uniquely embedded FRAM and a holistic ultra-low-power system architecture, allowing system designers to increase performance while lowering energy consumption. FRAM technology combines the low-energy fast writes, flexibility, and endurance of RAM with the nonvolatile behavior of flash.
MSP430FR215x and MSP430FR235x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the MSP-EXP430FR2355 LaunchPad™ development kit and the MSP-TS430PT48 48-pin target development board. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. The MSP430 MCUs are also supported by extensive online collateral, training, and online support through the E2E™ support forums.
For complete module descriptions, see the MSP430FR4xx and MSP430FR2xx Family Users Guide.
更多資訊
造訪 TI 開發人員區以開始進行評估及開發。
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器
μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。
在單機模式下,只要按下「開始」按鈕或透過一些 TTL 控制線,就可以執行編程週期。
其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。
MSP-EXP430FR2355 — MSP430FR2355 LaunchPad™ 開發套件
MSP-EXP430FR2355 LaunchPad™ 開發套件是以 MSP430FR2355 經濟型微控制器 (MCU) 為基礎的易用評估模組 (EVM)。其包含開始在超低功耗 MSP430FR2x 經濟型 MCU 平台上開發的一切所需,包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板含 2 個按鈕和 2 個 LED,以建立簡單的使用者介面。此外也配備環境光感測器及外部類比來源的連接器。
MSP430FR2355 MCU 包括可配置訊號鏈元件的智慧類比組合,其中包含多個 12 位元數位轉類比轉換器 (DAC) 和可編程增益放大器 (PGA) 選項,以及 12 位元類比轉數位轉換器 (...)
MSP-TS430PT48 — 適用於 48 針腳 MSP430FR2355 MCU 的目標開發基板 (不包括微處理器)
附註: 此套件不包含 MSP430 ™ 微控制器 (MCU) 樣品。 若要索取相容裝置的樣品,請造訪產品頁面,或在將工具新增至 TI Store 購物車後選擇相關 MCU:
MSP430FR2355。
MSP-TS430PT48 微控制器開發板是一個獨立的 ZIF 插座目標板,用於透過 JTAG 介面或 Spy Bi-Wire (2 線 JTAG) 協定對 MSP430 在系統進行程式設計和偵錯。 此開發電路板支援採用 48 接腳 QFP 封裝的 MSP430FR2355 FRAM 裝置 (TI 封裝代碼: PT)。 請檢查目標的裝置文件,尋找正確的目標電路板。
(...)
MSP-FET — MSP MCU 程式設計工具和偵錯器
MSP-FET 是一款強大的模擬開發工具,通常稱為偵錯探測器,可讓使用者快速展開 MSP 低功耗微控制器 (MCU) 的開始工作。
它支援透過 JTAG 和 SBW 介面進行編程和即時偵錯。此外,MSP-FET 也能在電腦 USB 介面與 MSP UART 間提供後通道 UART 連接。這為 MSP 程式設計工具提供了一種便利的方法,能在 MSP 和電腦上執行的終端之間進行串行通訊。它也支援透過 UART 和 I2C 通訊協定,使用 BSL(自舉式載入程式)將程式(通常稱為韌體)載入到 MSP 目標。
USB 介面可將 MSP-FET 連接至電腦,而 14 針腳連接器則可存取 MSP (...)
ALGO-3P-WRITENOW — Algocraft WriteNow!程式設計工具
WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧,便於整合至 ATE 與固定裝置。編程器可單機運作,或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線,並隨附操作簡易的工具軟體。
MSP-FRAM-UTILITIES — FRAM embedded software utilities for MSP ultra-low-power microcontrollers
The Texas Instruments FRAM Utilities is designed to grow as a collection of embedded software utilities that leverage the ultra-low-power and virtually unlimited write endurance of FRAM. The utilities are available for MSP430FRxx FRAM microcontrollers and provide example code to help start (...)
支援產品和硬體
產品
MSP430 microcontrollers
MSPFRBOOT — MSPFRBOOT
The bootloader (BSL) on MSP430™ microcontrollers (MCUs) lets users communicate with embedded memory in the MSP MCUs during the prototyping phase, final production, and in service. This is done through standard interfaces such as UART, I2C, SPI, and USB. Both the programmable memory (Flash/FRAM) and (...)
支援產品和硬體
產品
MSP430 microcontrollers
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
支援產品和硬體
產品
Arm Cortex-M0+ MCU
MSP430 microcontrollers
Arm Cortex-R MCU
C2000 即時微控制器
Sub-1 GHz 無線 MCU
低耗電 2.4GHz 產品
汽車無線連線產品
汽車 mmWave 雷達感測器
工業 mmWave 雷達感測器
汽車駕駛輔助 SoC
音訊與雷達 DSP SoC
多媒體與工業網路 SoC
硬體開發
子卡
開發板
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
支援產品和硬體
此設計資源支援此類別中多數產品。
檢查產品詳細資料頁面以確認支援。
-
parametric-filter 微處理器和 DSP -
parametric-filter Microcontrollers -
parametric-filter Wi-Fi 產品 -
parametric-filter 低耗電 2.4GHz 產品 -
parametric-filter 訊號調節器 -
parametric-filter mmWave 雷達感測器
ENERGYTRACE — EnergyTrace 技術
As most developers know, it is difficult to (...)
IAR-KICKSTART — IAR Embedded Workbench
MSP430-ACADEMY — MSP430™ academy
支援產品和硬體
產品
MSP430 microcontrollers
硬體開發
開發板
開發套件
WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS
MSP-GANG-SOFTWARE — MSP-GANG Software
支援產品和硬體
產品
Arm Cortex-M0+ MCU
MSP430 microcontrollers
硬體開發
開發板
開發套件
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
產品
C2000 即時微控制器
工業 mmWave 雷達感測器
汽車 mmWave 雷達感測器
MSP430 microcontrollers
Wi-Fi 產品
Arm Cortex-M4 MCU
Arm Cortex-M0+ MCU
Arm Cortex-R MCU
低耗電 2.4GHz 產品
汽車無線連線產品
Sub-1 GHz 無線 MCU
音訊與雷達 DSP SoC
多媒體與工業網路 SoC
SLAC740 — MSP430FR235x, MSP430FR215x Code Examples
支援產品和硬體
產品
MSP430 microcontrollers
SLAC807 — MCT8316ZTEVM MSP430FR2355 GUI Firmware
支援產品和硬體
產品
MSP430 microcontrollers
硬體開發
開發板
CIRCUIT0020 — 轉阻放大器電路
CIRCUIT060001 — 單電源、低壓側、單向電流感測電路
CIRCUIT060002 — 使用 NTC 熱敏電阻電路的溫度感測
CIRCUIT060003 — 使用 PTC 熱敏電阻電路的溫度感測
CIRCUIT060004 — 低雜訊和長距離 PIR 感測器調節器電路
CIRCUIT060005 — 具有離散差分放大器電路的高壓側電流感測
CIRCUIT060006 — 橋接放大器電路
CIRCUIT060007 — 低壓側雙向電流感測電路
CIRCUIT060009 — 半波整流器電路
CIRCUIT060089 — 具有 MSP430 智慧類比組合的單電源、低壓側、單向電流感測電路
CIRCUIT060090 — 具有 MSP430 智慧類比組合的溫度感測負溫度係數 (NTC) 電路
CIRCUIT060091 — 具有 MSP430 智慧類比組合的溫度感測正溫度係數 (PTC) 電路
CIRCUIT060092 — 具有 MSP430 智慧類比組合的低雜訊和長距離被動式紅外線感測器調節器電路
CIRCUIT060093 — 具有 MSP430 智慧類比組合的高壓側電流感測電路設計
CIRCUIT060094 — 具有 MSP430 智慧類比組合的單電源應變規橋接放大器電路
CIRCUIT060095 — 具有 MSP430 智慧類比組合的低壓側雙向電流感測電路
CIRCUIT060096 — 具有 MSP430 智慧類比組合的半波整流器電路
CIRCUIT060097 — 具有 MSP430 智慧類比組合的轉阻放大器電路
MSP-3P-SEARCH — MSP 第三方搜尋工具
(...)
TIDM-01000 — 具有 MSP430 智慧類比組合的 4 至 20-mA 迴路供電 RTD 溫度發射器參考設計
TIDA-010019 — 溫度感測器中適用於冷接點補償參考設計的 RTD 更換
TIDA-010056 — 適用於 3 相 BLDC 驅動的 54-V、1.5 kW、>99% 效率、70x69 mm2 功率級參考設計
TIDA-010031 — 25.2-V、30-A 高速無感測器 (>100 krpm) 無刷 DC 馬達驅動參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| LQFP (PT) | 48 | Ultra Librarian |
| TSSOP (DBT) | 38 | Ultra Librarian |
| VQFN (RHA) | 40 | Ultra Librarian |
| VQFN (RSM) | 32 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點