首頁 馬達驅動器 步進馬達驅動器
首頁
馬達驅動器
步進馬達驅動器

DRV8889-Q1

現行

具有整合式電流感測和熄火偵測功能的車用 50V、1.5A 雙極步進馬達驅動器

立即訂購
產品規格表

DRV8889-Q1

現行
產品規格表 立即訂購

產品詳細資料

Vs ABS (max) (V) 50 Vs (min) (V) 4.5 Peak output current (A) 2.4 Control mode STEP/DIR Control interface Hardware (GPIO), SPI Number of full bridges 2 Full-scale current (A) 1.5 RDS(ON) (HS + LS) (mΩ) 900 Sleep current (µA) 2 Microstepping levels 256 Decay mode Mixed, Slow, Smart Tune Features Integrated Current Sensing, Open-Load Detection, Smart Tune, Stall Detection Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
Vs ABS (max) (V) 50 Vs (min) (V) 4.5 Peak output current (A) 2.4 Control mode STEP/DIR Control interface Hardware (GPIO), SPI Number of full bridges 2 Full-scale current (A) 1.5 RDS(ON) (HS + LS) (mΩ) 900 Sleep current (µA) 2 Microstepping levels 256 Decay mode Mixed, Slow, Smart Tune Features Integrated Current Sensing, Open-Load Detection, Smart Tune, Stall Detection Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4 VQFN (RGE) 24 16 mm² 4 x 4
  • AEC-Q100 Qualified for Automotive
  • Up to 1/256 microstepping
  • Integrated current sense functionality
    • No sense resistors required
  • Smart tune decay technology, Fixed slow, and mixed decay options
  • 4.5 to 45-V Operating supply voltage range
  • Pin to pin RDS(ON) variants:

    - DRV8889/A-Q1: 900 mΩ HS + LS at 25°C

    - DRV8899-Q1: 1200 mΩ HS + LS at 25°C
  • High current capacity per bridge
    • DRV8889/A-Q1: 2.4-A peak, 1.5-A full-scale
    • DRV8899-Q1: 1.7-A peak, 1-A full-scale
  • TRQ_DAC bits to scale full-scale current
  • Configurable off-time PWM chopping
  • Simple STEP/DIR interface
  • SPI with daisy chain support
  • Low-current sleep mode (2 µA)
  • Programmable output slew rate
  • Programmable open load detection time with DRV8889A-Q1
  • Spread spectrum clocking to minimize EMI
  • Protection features
    • VM undervoltage lockout
    • Overcurrent protection
    • Stall detection
    • Open load detection
    • Overtemperature warning and shutdown
    • Undertemperature warning
    • Fault condition indication pin (nFAULT)
  • Functional Safety-Capable
  • AEC-Q100 Qualified for Automotive
  • Up to 1/256 microstepping
  • Integrated current sense functionality
    • No sense resistors required
  • Smart tune decay technology, Fixed slow, and mixed decay options
  • 4.5 to 45-V Operating supply voltage range
  • Pin to pin RDS(ON) variants:

    - DRV8889/A-Q1: 900 mΩ HS + LS at 25°C

    - DRV8899-Q1: 1200 mΩ HS + LS at 25°C
  • High current capacity per bridge
    • DRV8889/A-Q1: 2.4-A peak, 1.5-A full-scale
    • DRV8899-Q1: 1.7-A peak, 1-A full-scale
  • TRQ_DAC bits to scale full-scale current
  • Configurable off-time PWM chopping
  • Simple STEP/DIR interface
  • SPI with daisy chain support
  • Low-current sleep mode (2 µA)
  • Programmable output slew rate
  • Programmable open load detection time with DRV8889A-Q1
  • Spread spectrum clocking to minimize EMI
  • Protection features
    • VM undervoltage lockout
    • Overcurrent protection
    • Stall detection
    • Open load detection
    • Overtemperature warning and shutdown
    • Undertemperature warning
    • Fault condition indication pin (nFAULT)
  • Functional Safety-Capable

The DRV8889-Q1 and DRV8889A-Q1 are fully integrated stepper motor drivers, supporting up to 1.5 A full scale current with an internal microstepping indexer, smart tune decay technology, advanced stall detection algorithm, and integrated current sensing.

The device supports up to 1/256 levels of microstepping to enable a smooth motion profile. Integrated current sensing eliminates the need for two external resistors, saving board space and cost. With advanced stall detection algorithm, designers can detect if the motor stopped and take action as needed which can improve efficiency and reduce noise. The device provides 8 decay mode options including: smart tune, slow, and mixed decay options. Smart tune automatically adjusts for optimal current regulation performance. The device also includes an integrated torque DAC which allows for the controller to scale the output current through SPI without needing to scale the VREF voltage reference. A low-power sleep mode is provided using an nSLEEP pin. The device features full duplex, 4-wire synchronous SPI communication, with daisy chain support for up to 63 devices connected in series, for configurability and detailed fault reporting. View our full portfolio of stepper motor drivers on ti.com.

The DRV8889-Q1 and DRV8889A-Q1 are fully integrated stepper motor drivers, supporting up to 1.5 A full scale current with an internal microstepping indexer, smart tune decay technology, advanced stall detection algorithm, and integrated current sensing.

The device supports up to 1/256 levels of microstepping to enable a smooth motion profile. Integrated current sensing eliminates the need for two external resistors, saving board space and cost. With advanced stall detection algorithm, designers can detect if the motor stopped and take action as needed which can improve efficiency and reduce noise. The device provides 8 decay mode options including: smart tune, slow, and mixed decay options. Smart tune automatically adjusts for optimal current regulation performance. The device also includes an integrated torque DAC which allows for the controller to scale the output current through SPI without needing to scale the VREF voltage reference. A low-power sleep mode is provided using an nSLEEP pin. The device features full duplex, 4-wire synchronous SPI communication, with daisy chain support for up to 63 devices connected in series, for configurability and detailed fault reporting. View our full portfolio of stepper motor drivers on ti.com.
filter 尋找其它 步進馬達驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
DRV8849 現行 具智慧調諧及整合式電流感測的 38-V 1.5-A 雙全橋步進馬達驅動器 Dual Stepper for size and cost reduction
功能相同，但引腳輸出與所比較的裝置不同
DRV8434A 現行 具整合式電流感測與熄火偵測 (GPIO) 的 48-V、2.5-A 雙極步進馬達驅動器 48V, 2.5A bipolar stepper motor driver, integrated current sensing & stall detection over Analog interface
DRV8434S 現行 具整合式電流感測與熄火偵測 (SPI) 的 48-V、2.5-A 雙極步進驅動器 48V, 1.5A bipolar stepper motor driver, integrated current sensing & stall detection over SPI interface
功能與所比較的裝置相似
DRV8899-Q1 現行 具整合式電流感測功能的車用 50-V、1.0-A 雙極步進馬達驅動器 Pin to pin part without stall detection

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 19
重要文件 類型 標題 格式選項 日期
* Data sheet DRV8889-Q1, DRV8889A-Q1 Automotive Stepper Driver with Integrated Current Sense, 1/256 Micro-Stepping, and Stall Detection datasheet (Rev. D) PDF | HTML 2021年 4月 23日
White paper 未來 SDV 車輛內部：整合遙控邊緣 節點 PDF | HTML 2025年 9月 26日
White paper How to design heating and cooling systems for HEV/EVs (Rev. A) 2023年 6月 21日
Application brief Advantages of Integrated Current Sensing (Rev. B) PDF | HTML 2022年 6月 20日
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021年 10月 14日
Application note How to Improve Motion Smoothness and Accuracy of Stepper Motors (Rev. A) PDF | HTML 2021年 10月 11日
Application note Daisy Chain Implementation for Serial Peripheral Interface (Rev. A) 2021年 4月 7日
Functional safety information DRV8889-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021年 3月 8日
Application note Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) PDF | HTML 2021年 1月 19日
Application note How to Reduce Audible Noise in Stepper Motors (Rev. A) PDF | HTML 2020年 4月 21日
Application note Sensorless Stall Detection for Stepper Motors (Rev. A) 2020年 1月 10日
Technical article How stepper motors improve noise and efficiency in automotive system design PDF | HTML 2019年 11月 19日
Technical article How semiconductor technologies are changing automotive lighting roadmaps PDF | HTML 2019年 10月 24日
More literature DRV8889-Q1EVM Software User's Guide (Rev. A) 2019年 10月 10日
White paper How smart tune regulates current in stepper motors (Rev. A) 2019年 3月 19日
Application note Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) 2019年 2月 19日
Application brief Smart Tuning for Efficient Stepper Driving 2018年 11月 20日
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
Application brief PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8889-Q1EVM — 具有 1/256 微步進和熄火偵測功能的 DRV8889-Q1 車用步進驅動器評估模組

DRV8889-Q1 評估模組 (EVM) 可輕鬆評估 DRV8889-Q1 裝置。DRV8889-Q1 裝置是適合汽車步進馬達應用的整合式雙全橋驅動器。

評估模組可讓裝置配置其所有功能模式，包括降至 1/256 步進解析度的微型步進、用於智慧微調的多重衰退模式、熄火測試以及打滑測試。電路板上的 MSP430F2617 提供 STEP、DIR (方向) 和 SPI 訊號，以控制 DRV8889-Q1。這些設定可在此 EVM 的可下載裝置 GUI 中進行配置。

如需有關此評估模組的詳細資訊，請參閱 DRV8889-Q1EVM 硬體和 GUI 使用指南。

使用指南: PDF
View Options
快速入門

MSP-MOTOR-CONTROL — MSP firmware solutions for motor control

MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)

支援產品和硬體

支援產品和硬體
開始使用 下載選項
模擬型號

IBIS Models for the SPI Interface Pins

SLVMDE8.ZIP (66 KB) - IBIS Model
下載
參考設計

TIDA-020026 — 適用可調式車前燈和動態車頭燈水平校正的步進馬達驅動器參考設計

此參考設計詳細說明驅動和控制兩個步進馬達的解決方案，以進行汽車頭燈應用之動態頭燈調平與旋轉，例如自動調整 LED 驅動模組或高解析度 DLP 模組。其使用具有整合式線性電壓穩壓器的區域互連網路 (LIN) 系統基本晶片，兩個具有序列周邊介面 (SPI) 的步進馬達驅動器，以及微控制器 LaunchPad™ 開發套件。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 24 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片