首頁 微控制器 (MCU) 與處理器 Microcontrollers 即時數位電源 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
即時數位電源 MCU

TMS320F280033

現行

C2000™ 32 位元 MCU 120-MHz 128-KB 快閃記憶體、FPU、TMU、AES 和 CAN-FD

立即訂購
產品規格表
使用指南

TMS320F280033

現行
立即訂購

產品詳細資料

CPU 1 C28 Frequency (MHz) 120 Flash memory (kByte) 128 RAM (kByte) 69 ADC type 3 12-bit SAR Total processing (MIPS) 120 Features CAN FD, Dual security zones, FPU32 UART 4 CAN (#) 2 Sigma-delta filter 8 PWM (Ch) 16 Security Secure storage TI functional safety category Functional Safety Quality-Managed Number of ADC channels 14, 16, 18, 23 Direct memory access (Ch) 6 SPI 2 QEP 2 USB No Hardware accelerators Floating point unit, Trigonometric math accelerator Edge AI enabled Edge AI Studio enabled Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, CAN FD, FSI, I2C, LIN, PMBUS, SCI, SPI, UART Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 128 Number of I2Cs 2
CPU 1 C28 Frequency (MHz) 120 Flash memory (kByte) 128 RAM (kByte) 69 ADC type 3 12-bit SAR Total processing (MIPS) 120 Features CAN FD, Dual security zones, FPU32 UART 4 CAN (#) 2 Sigma-delta filter 8 PWM (Ch) 16 Security Secure storage TI functional safety category Functional Safety Quality-Managed Number of ADC channels 14, 16, 18, 23 Direct memory access (Ch) 6 SPI 2 QEP 2 USB No Hardware accelerators Floating point unit, Trigonometric math accelerator Edge AI enabled Edge AI Studio enabled Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, CAN FD, FSI, I2C, LIN, PMBUS, SCI, SPI, UART Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 128 Number of I2Cs 2
LQFP (PT) 48 81 mm² (9 mm × 9 mm) LQFP (PN) 80 196 mm² (14 mm × 14 mm) LQFP (PM) 64 144 mm² (12 mm × 12 mm) LQFP (PZ) 100 256 mm² (16 mm × 16 mm)
  • TMS320C28x 32-bit DSP core at 120 MHz
    • IEEE 754 Floating-Point Unit (FPU)
      • Support for Fast Integer Division (FINTDIV)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • CRC Engine and Instructions (VCRC)
    • Ten hardware breakpoints (with ERAD)
  • Programmable Control Law Accelerator (CLA)
    • 120 MHz
    • IEEE 754 single-precision floating-point instructions
    • Executes code independently of main CPU
  • On-chip memory
    • 384KB (192KW) of flash (ECC-protected) across three independent banks
    • 69KB (34.5KW) of RAM (ECC-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Two internal 10-MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3-V I/O design
    • Internal VREG generation allows for single-supply design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 55 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins
    • 23 digital inputs on analog pins
    • 2 digital inputs/outputs on analog pins (AGPIO)
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Embedded Real-time Analysis and Diagnostic (ERAD)
    • Unique Identification (UID) number
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
    • Two Inter-integrated Circuit (I2C) interfaces
    • One Controller Area Network (CAN/DCAN) bus port
    • One Controller Area Network with Flexible Data-Rate (CAN FD/MCAN) bus port
    • Two Serial Peripheral Interface (SPI) ports
    • Two UART-compatible Serial Communication Interface (SCI)
    • Two UART-compatible Local Interconnect Network (LIN) interfaces
    • Fast Serial Interface (FSI) with one transmitter and one receiver (up to 200Mbps)
  • Analog system
    • Three 4-MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 23 external channels (includes the two gpdac outputs)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
    • Two 12-bit buffered DAC outputs
  • Enhanced control peripherals
    • 16 ePWM channels with eight channels that have high-resolution capability (150-ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Three Enhanced Capture (eCAP) modules
      • High-resolution Capture (HRCAP) available on one of the three eCAP modules
    • Two Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
    • Eight Sigma-Delta Filter Module (SDFM) input channels (two parallel filters per channel)
      • Standard SDFM data filtering
      • Comparator filter for fast action for overvalue or undervalue condition
    • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • 4 tiles
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Host Interface Controller (HIC)
    • Access to internal memory from an external host
  • Background CRC (BGCRC)
    • One cycle CRC computation on 32 bits of data
  • Advanced Encryption Standard (AES) accelerator
  • Live Firmware Update (LFU)
    • Fast context switching from old to new firmware
    • Flash bank erase time improvements
  • Diagnostic features
    • Memory Power On Self Test (MPOST)
    • Hardware Built-in Self Test (HWBIST)
  • Functional Safety-Compliant (PZ and Q100 PM packages only)
  • Safety-related certification
  • Package options:
    • 100-pin Low-profile Quad Flatpack (LQFP) [PZ suffix]
    • 80-pin Low-profile Quad Flatpack (LQFP) [PN suffix]
    • 64-pin (LQFP) [PM suffix]
    • 48-pin (LQFP) [PT suffix]
  • Temperature options:
    • Free-air (T A): –40°C to 125°C
    • Junction (T J): –40°C to 150°C
  • TMS320C28x 32-bit DSP core at 120 MHz
    • IEEE 754 Floating-Point Unit (FPU)
      • Support for Fast Integer Division (FINTDIV)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • CRC Engine and Instructions (VCRC)
    • Ten hardware breakpoints (with ERAD)
  • Programmable Control Law Accelerator (CLA)
    • 120 MHz
    • IEEE 754 single-precision floating-point instructions
    • Executes code independently of main CPU
  • On-chip memory
    • 384KB (192KW) of flash (ECC-protected) across three independent banks
    • 69KB (34.5KW) of RAM (ECC-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Two internal 10-MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3-V I/O design
    • Internal VREG generation allows for single-supply design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 55 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins
    • 23 digital inputs on analog pins
    • 2 digital inputs/outputs on analog pins (AGPIO)
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Embedded Real-time Analysis and Diagnostic (ERAD)
    • Unique Identification (UID) number
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
    • Two Inter-integrated Circuit (I2C) interfaces
    • One Controller Area Network (CAN/DCAN) bus port
    • One Controller Area Network with Flexible Data-Rate (CAN FD/MCAN) bus port
    • Two Serial Peripheral Interface (SPI) ports
    • Two UART-compatible Serial Communication Interface (SCI)
    • Two UART-compatible Local Interconnect Network (LIN) interfaces
    • Fast Serial Interface (FSI) with one transmitter and one receiver (up to 200Mbps)
  • Analog system
    • Three 4-MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 23 external channels (includes the two gpdac outputs)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
    • Two 12-bit buffered DAC outputs
  • Enhanced control peripherals
    • 16 ePWM channels with eight channels that have high-resolution capability (150-ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Three Enhanced Capture (eCAP) modules
      • High-resolution Capture (HRCAP) available on one of the three eCAP modules
    • Two Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
    • Eight Sigma-Delta Filter Module (SDFM) input channels (two parallel filters per channel)
      • Standard SDFM data filtering
      • Comparator filter for fast action for overvalue or undervalue condition
    • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • 4 tiles
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Host Interface Controller (HIC)
    • Access to internal memory from an external host
  • Background CRC (BGCRC)
    • One cycle CRC computation on 32 bits of data
  • Advanced Encryption Standard (AES) accelerator
  • Live Firmware Update (LFU)
    • Fast context switching from old to new firmware
    • Flash bank erase time improvements
  • Diagnostic features
    • Memory Power On Self Test (MPOST)
    • Hardware Built-in Self Test (HWBIST)
  • Functional Safety-Compliant (PZ and Q100 PM packages only)
  • Safety-related certification
  • Package options:
    • 100-pin Low-profile Quad Flatpack (LQFP) [PZ suffix]
    • 80-pin Low-profile Quad Flatpack (LQFP) [PN suffix]
    • 64-pin (LQFP) [PM suffix]
    • 48-pin (LQFP) [PT suffix]
  • Temperature options:
    • Free-air (T A): –40°C to 125°C
    • Junction (T J): –40°C to 150°C

The TMS320F28003x (F28003x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 120 MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

The CLA allows significant offloading of common tasks from the main C28x CPU. The CLA is an independent 32-bit floating-point math accelerator that executes in parallel with the CPU. Additionally, the CLA has its own dedicated memory resources and it can directly access the key peripherals that are required in a typical control system. Support of a subset of ANSI C is standard, as are key features like hardware breakpoints and hardware task-switching.

The F28003x supports up to 384KB (192KW) of flash memory divided into three 128KB (64KW) banks, which enable programming and execution in parallel. Up to 69KB (34.5KW) of on-chip SRAM is also available to supplement the flash memory.

The Live Firmware Update hardware enhancements on F28003x allow fast context switching from the old firmware to the new firmware to minimize application downtime when updating the device firmware.

High-performance analog blocks are integrated on the F28003x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Sixteen PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to power factor correction and advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, CAN and CAN FD) and offers multiple pin-muxing options for optimal signal placement. The Fast Serial Interface (FSI) enables up to 200Mbps of robust communications across an isolation boundary.

New to the C2000 platform is the Host Interface Controller (HIC), a high-throughput interface that allows an external host to access the resources of the TMS320F28003x directly.

Want to learn more about features that make C2000 Real-Time MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD280039C evaluation board and download C2000Ware.

The TMS320F28003x (F28003x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 120 MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

The CLA allows significant offloading of common tasks from the main C28x CPU. The CLA is an independent 32-bit floating-point math accelerator that executes in parallel with the CPU. Additionally, the CLA has its own dedicated memory resources and it can directly access the key peripherals that are required in a typical control system. Support of a subset of ANSI C is standard, as are key features like hardware breakpoints and hardware task-switching.

The F28003x supports up to 384KB (192KW) of flash memory divided into three 128KB (64KW) banks, which enable programming and execution in parallel. Up to 69KB (34.5KW) of on-chip SRAM is also available to supplement the flash memory.

The Live Firmware Update hardware enhancements on F28003x allow fast context switching from the old firmware to the new firmware to minimize application downtime when updating the device firmware.

High-performance analog blocks are integrated on the F28003x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Sixteen PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to power factor correction and advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, CAN and CAN FD) and offers multiple pin-muxing options for optimal signal placement. The Fast Serial Interface (FSI) enables up to 200Mbps of robust communications across an isolation boundary.

New to the C2000 platform is the Host Interface Controller (HIC), a high-throughput interface that allows an external host to access the resources of the TMS320F28003x directly.

Want to learn more about features that make C2000 Real-Time MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD280039C evaluation board and download C2000Ware.

filter 尋找其它 即時數位電源 MCU
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TMS320F280034-Q1 現行 搭配 CLA、AES 和 CAN-FD 的車用 C2000™ 32 位元 MCU 120-MHz 128-KB 閃存記憶體、FPU、TMU This product is the automotive grade equivalent with CLA (240 MIPS).
TMS320F280039 現行 搭配 CLA、AES 和 CAN-FD 的 C2000™ 32 位元 MCU 120-MHz 384-KB 閃存記憶體、FPU、TMU This product is the 384-KB flash equivalent with CLA (240 MIPS).
TMS320F280037 現行 搭配 CLA、AES 和 CAN-FD 的 C2000™ 32 位元 MCU 120-MHz 256-KB 閃存記憶體、FPU、TMU This product is the 256-KB flash equivalent with CLA (240 MIPS).
TMS320F280034 現行 搭配 CLA、AES 和 CAN-FD 的 C2000™ 32 位元 MCU 120-MHz 128-KB 閃存記憶體、FPU、TMU This product is the equivalent with CLA (240 MIPS).
功能相似於所比較的產品。
TMS320F2800132 現行 具有 100 MHz、64-KB 快閃記憶體、FPU、TMU、六 PWM 和零 CAN 的 C2000™ 32 位元 MCU Newer C2000 device with options for higher MHz and more flash memory
TMS320F2800133 現行 具有 120 MHz、64-KB 快閃記憶體、FPU 與 TMU 的 C2000™ 32 位元 MCU Newer C2000 device with options for higher MHz and more flash memory
TMS320F2800135 現行 具有 120 MHz、128-KB 快閃記憶體、FPU 與 TMU 的 C2000™ 32 位元 MCU Newer C2000 device with options for higher MHz and more flash memory

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 58
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TMS320F28003x Real-Time Microcontrollers datasheet (Rev. C) PDF | HTML 2023/12/7
* 使用指南 TMS320F28003x Real-Time Microcontrollers Technical Reference Manual (Rev. C) PDF | HTML 2024/3/28
* 勘誤表 TMS320F28003x Real-Time MCUs Silicon Errata (Rev. D) PDF | HTML 2024/5/29
使用指南 C2000 Real-Time Control Peripheral Reference Guide (Rev. V) PDF | HTML 2026/7/6
應用說明 Secure BOOT On C2000 Device (Rev. A) PDF | HTML 2026/6/15
Product overview Implementing IEC 60730 / UL 1998 Compliance for C2000 Real-Time Microcontrollers (Rev. B) PDF | HTML 2026/6/4
功能安全資訊 VDE Safety Certification for C2000 MCUs (Rev. A) 2026/6/4
功能安全資訊 TUV SUD Certificate No. Z10 084071 0025 Rev. 00 (Rev. B) 2025/12/15
應用說明 Live Firmware Update Without Device Reset on C2000™ MCUs (Rev. C) PDF | HTML 2025/10/29
應用說明 Serial Flash Programming of C2000 Microcontrollers (Rev. I) PDF | HTML 2025/8/14
應用說明 MCU Control Center Tool Developer's Guide PDF | HTML 2025/8/4
應用說明 MCU Signal Sight Tool Developer's Guide PDF | HTML 2025/8/1
Product overview Safety Package for Automotive and Industrial Real-Time Microcontrollers (Rev. E) PDF | HTML 2025/6/23
類比設計期刊 如何限制 PFC 再湧浪電流 PDF | HTML Download English Version 2025/5/7
Product overview Industrial Functional Safety for C2000™ Real-Time Microcontrollers (Rev. F) 2025/4/23
Application brief How to Debug Interrupt Abnormalities PDF | HTML 2025/2/25
應用說明 C2000 IDE Assist Tool Features Guide (Rev. A) PDF | HTML 2025/1/29
應用說明 Digital Control Implementation for Hybrid Hysteretic Control LLC Converter (Rev. A) PDF | HTML 2024/8/21
應用說明 ADC Oversampling (Rev. A) PDF | HTML 2024/8/6
證書 Certificate of Compliance UL-CA-2340465-0 2024/5/23
應用說明 Power Supply and Monitoring Solution for C2000 MCU Automotive Applications PDF | HTML 2024/4/17
應用說明 VREFHI Input Driver Design for C2000 MCUs PDF | HTML 2024/1/18
應用說明 Clock Edge Delay Compensation With Isolated Modulators Digital Interface to MCUs (Rev. A) PDF | HTML 2024/1/12
使用指南 TMS320F28003x Flash API Version 1.58.10.00 Reference Guide (Rev. C) PDF | HTML 2023/11/13
功能安全資訊 Functional Safety Manual for TMS320F28003x Real-Time Microcontrollers PDF | HTML 2023/11/1
應用說明 Optimized Control Schemes for Totem Pole PFC With Digital Controller PDF | HTML 2023/9/22
白皮書 Simplifying Robotics Motor Drive Safety Assessments PDF | HTML 2023/5/19
應用說明 Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 2023/4/19
應用說明 Charge-Sharing Driving Circuits for C2000 ADCs (using PSPICE-FOR-TI) (Rev. A) PDF | HTML 2023/3/24
應用說明 Charge-Sharing Driving Circuits for C2000 ADCs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 2023/3/24
應用說明 Methods for Mitigating ADC Memory Cross-Talk (Rev. A) PDF | HTML 2023/3/24
應用說明 ADC Input Circuit Evaluation for C2000 MCUs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 2023/3/24
應用說明 ADC Input Circuit Evaluation for C2000 Real-Time MCUs (using PSPICE-FOR-TI) PDF | HTML 2023/3/24
應用說明 C2000 ePWM Developer’s Guide (Rev. A) PDF | HTML 2023/2/24
應用說明 C2000 SysConfig Linker Command Tool PDF | HTML 2023/1/26
應用說明 Using the Fast Serial Interface (FSI) With Multiple Devices in an Application (Rev. E) PDF | HTML 2023/1/25
應用說明 Hardware Design Guide for F2800x C2000™ Real-Time MCU Series (Rev. A) PDF | HTML 2022/12/21
使用指南 Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) (Rev. C) PDF | HTML 2022/6/29
應用說明 Intelligent LLC SR Control Using C2000 and UCD7138 (Rev. A) PDF | HTML 2022/6/27
應用說明 Interfacing EEPROM Using PMBus in I2C Mode PDF | HTML 2022/5/6
應用說明 Implement three-phase interleaved LLC on C2000 Type-4 PWM PDF | HTML 2022/3/30
應用說明 The Essential Guide for Developing With C2000 Real-Time Microcontrollers (Rev. F) PDF | HTML 2022/3/3
應用說明 Real-Time Benchmarks Showcasing C2000™ Control MCU's Optimized Signal Chain (Rev. A) PDF | HTML 2021/12/15
更多文件說明 New Product Update: Latest cost-optimized C2000 real-time MCU family: F28003x 2021/12/9
電子書 Real-Time Control Reference Guide PDF | HTML 2021/10/29
使用指南 Migration Between TMS320F28002x and TMS320F28003x PDF | HTML 2021/10/20
應用說明 C2000 SysConfig PDF | HTML 2021/10/20
白皮書 Speed Up Development With C2000™ Real-Time MCUs Using SysConfig PDF | HTML 2021/10/20
應用說明 Getting Started with the MCAN (CAN FD) Module PDF | HTML 2021/10/20
應用說明 Designing With the C2000™ Embedded Pattern Generator (EPG) PDF | HTML 2021/10/20
更多文件說明 C2000™ F28003x Real-Time Microcontrollers 2021/10/14
白皮書 Prototype Motor Drive System for Autonomous Industrial Mobile Robots PDF | HTML 2021/9/29
應用說明 Leverage New Type ePWM Features for Multiple Phase Control PDF | HTML 2021/5/11
應用說明 C2000™ DCSM Security Tool (Rev. A) PDF | HTML 2021/5/10
更多文件說明 Maximize density, power, and reliability with TI GaN and C2000™ real-time MCUs 2020/12/15
使用指南 Migration Between TMS320F28004x and TMS320F28003x PDF | HTML 2020/6/25
應用說明 How to Migrate Custom Logic From an FPGA/CPLD to C2000 Microcontrollers (Rev. A) PDF | HTML 2020/6/15
應用說明 Calculating FIT for a Mission Profile 2015/3/24

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

XDS110ISO-EVM — 適用於 C2000 和 Sitara™ controlSOM 的 XDS110 隔離插入式評估模組

XDS110 隔離插入式電路板是一款適用於 C2000 和 Sitara controlSOM 的即時偵錯及 Flash 編程評估模組。可透過非隔離式 120 針腳連接器或電氣隔離式 16 針腳連接器連接 C2000 及 Sitara controlSOM。兩種接頭皆具備 JTAG/cJTAG/SWD 支援和全雙工 UART 埠。電路板支援兩個額外功能，可在目標電路板偵錯中使用：序列周邊介面 (SPI) 至四個隔離式數位類比轉換器 (DAC) 通道，以及最多六個數位和四個類比非隔離通道。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
開發套件

LAUNCHXL-F280039C — 適用於 C2000™ 即時 MCU 的 TMS320F280039C LaunchPad™ 開發套件

LAUNCHXL-F280039C 是適用 TI C2000™ 即時微控制器 TMS320F28003x 裝置系列的低成本開發電路板。其適合進行初始評估與原型設計，提供標準化且使用方便的平台，可讓您開發下一個應用。此擴充版本 LaunchPad™ 開發套件提供額外針腳以助開發，並支援連接兩個 BoosterPack™ 外掛模組。屬於 TI MCU LaunchPad 龐大生態系統的一部分，也與各種外掛程式模組交互相容。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
子卡

TMDSCNCD280039C — TMS320F280039C 評估模組 C2000™ MCU controlCARD™

TMDSCNCD280039C 是一款用於 TI C2000™ MCU 系列 F28003x 裝置的低成本評估和開發板。除了隨附 HSEC180 (180 針腳高速邊緣連接器)，還可用作 controlCARD，是初始評估和原型設計的理想之選。對於評估 TMDSCNCD280039C，需要 180 接腳擴充站 TMDSHSECDOCK，並且可以單獨購買。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
子卡

TMDSHSECDOCK — HSEC180 controlCARD 基板擴充站

TMDSHSECDOCK 為一塊基板，可為相容的 HSEC180 架構 controlCARD 提供關鍵訊號的接頭針腳存取。提供模擬板區域以快速進行原型設計。電路板電源可由 USB 纜線或 5-V 桶式電源供應器供電。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU110-U — XDS110 JTAG 偵錯探測器

德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。  對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。

德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU200-U — XDS200 USB 偵錯探測器

XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。

XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU560V2STM-U — XDS560™ 軟體 v2 系統追蹤 USB 偵錯探測器

XDS560v2 是 XDS560™ 系列偵錯探測器中性能最高的，且同時支援傳統 JTAG 標準 (IEEE1149.1) 與 cJTAG (IEEE1149.7)。  請注意，其不支援序列線偵錯 (SWD)。

所有 XDS 偵錯探測器均在所有配備嵌入式追蹤緩衝器 (ETB) 的 ARM 與 DSP 處理器中支援核心與系統追蹤。  對於針腳上的追蹤，則需要 XDS560v2 PRO TRACE。

XDS560v2 透過 MIPI HSPT 60 針腳接頭 (具有用於 TI 14 針腳、TI 20 針腳和 ARM 20 針腳的多轉接器) 連接到目標電路板，並透過 USB2.0 高速 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

從：TASKING Germany GmbH
支援產品和硬體
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
硬體程式設計工具

SEGGR-3P-FLASHER — 適用於高容量大量生產和 gang 編程的 SEGGER Flasher

SEGGER Flasher 是一系列專業的電路內編程器 (ICP)，專為維修服務環境、原型編程以及大量生產而設計。它們能夠對微控制器、系統單晶片 (SoC) 以及外部 SPI 介面快閃記憶體中的非揮發性記憶體進行編程，並支援透過多個 I/O 引腳進行串行與並行資料傳輸。

從：SEGGER
支援產品和硬體
軟體開發套件 (SDK)

C2000WARE — C2000Ware for C2000 Microcontrollers

C2000Ware 是一套完整的軟體和文件，可將開發時間縮至最短。其中包括裝置專用驅動程式，程式庫和週邊設備範例。

  • C2000 controlCARD、實驗套件及 LaunchPad 的硬體設計電路圖、BOM、Gerber 檔案和文件。
  • 裝置專用支援檔案、位元欄位標頭、位元欄位裝置週邊設備範例 (包括 LaunchPad™ 示範) 及裝置開發使用指南。
  • 裝置專用驅動程式庫和以驅動程式為基礎的週邊設備範例。
  • FreeRTOS 核心、C28x 與 Cortex-M4(CM) 連接埠與示範範範例。
  • 裝置專用與核心程式庫，例如：
    • (...)
支援產品和硬體
軟體開發套件 (SDK)

C2000WARE-DIGITALPOWER-SDK — DigitalPower SDK for C2000 Real-time Controllers

    • C2000™ 微控制器 (MCU) 的 DigitalPower SDK 是一套完整的軟體基礎設施、工具和文件，旨在減少針對各種 AC-DC、DC-DC 和 DC-AC 電源應用的 C2000 MCU 基準數位電源系統開發時間。該軟體包含在 C2000 數位電源評估模組 (EVM) 和 TI 設計 (TID) 上執行的韌體，這些模組專為太陽能、電信、伺服器、電動汽車充電器和工業電力傳輸應用而設計。DigitalPower SDK 在數位電源應用的開發和評估的每一個階段提供所有所需的資源
    • SDK 中提供了 C2000Ware (...)
支援產品和硬體
軟體開發套件 (SDK)

C2000WARE-MOTORCONTROL-SDK — MotorControl software development kit (SDK) for C2000™ MCUs

C2000™ 微控制器 (MCU) 的 MotorControl SDK 是一套完整的軟體基礎設施、工具和文件，旨在減少針對各種三相馬達控制應用的 C2000 即時控制器基馬達控制系統開發時間。該軟體包含在 C2000 馬達控制評估模組 (EVM) 和 TI 設計 (TID) 上運作的韌體，這些模組專為工業驅動、機器人、家電和汽車應用而設計。MotorControl SDK 在高性能馬達控制應用程式的每一個開發和評估階段提供所有所需的資源。

SDK 中提供了 C2000Ware 的副本，因此它提供了裝置特定的驅動程式和支援軟體，以完成複雜系統應用中的範例

請注意，以下列出的是此 SDK 支援的 (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

C2000-CGT — C28x/CLA code generation tools (CGT) - compiler

The TI C28x code generation tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI C2000™ microcontroller platforms. They are engineered to maximize the potential of C28x and C29x real-time control devices.

The CCStudio™ IDE is the integrated (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

C2000_CLA_SAFETI_CQKIT_RV — C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

開發安全編譯器資格認證套件是為了協助客戶對 TI ARM、C6000、C7000 或 C2000/CLA C/C++ 編譯器的使用進行認證，以確保符合功能安全標準，如 IEC 61508 和 ISO 26262。

安全編譯器資格認證套件：

  • 對 TI 客戶免費
  • 不需要使用者進行資格測試
  • 支援編譯器覆蓋範圍分析*
    • * 覆蓋範圍資料收集的說明可從每個 QKIT 下載頁面下載。
  • 不包括 Validas 諮詢

如需存取安全編譯器資格認證套件，請按一下上面其中一個索取按鈕。

如需進一步了解功能安全產品，請造訪 (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

EDGE-AI-STUDIO — Edge AI Studio

Edge AI Studio 是一系列圖形和命令行工具，旨在加速 TI 處理器、微控制器和雷達感測器上的邊緣 AI 開發。不管是使用來自 TI Model Zoo 的模型，還是
運用您自己的模型來開發概念驗證，Edge AI Studio 都能提供您所需的工具。

Edge AI Studio 圖形使用者介面提供完全整合的解決方案，用於收集和註釋資料、訓練和編譯模型，以在即時開發平台上部署。從 TI Model Zoo 中的各種預先訓練的模型中選擇，並可選擇透過自訂資料重新訓練，以提升準確度和性能。Edge AI Studio (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

EDGE-AI-STUDIO-MCU — Edge AI Studio for Microcontrollers

Edge AI Studio 是一系列圖形和命令行工具，旨在加速 TI 處理器、微控制器和雷達感測器上的邊緣 AI 開發。不管是使用來自 TI Model Zoo 的模型，還是
運用您自己的模型來開發概念驗證，Edge AI Studio 都能提供您所需的工具。

Edge AI Studio 圖形使用者介面提供完全整合的解決方案，用於收集和註釋資料、訓練和編譯模型，以在即時開發平台上部署。從 TI Model Zoo 中的各種預先訓練的模型中選擇，並可選擇透過自訂資料重新訓練，以提升準確度和性能。Edge AI Studio (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

TSK-3P-VX-TOOLSET — 適用於 Arm 的 TASKING VX 工具套件

適用於 Arm 的 VX 工具套件是一套經過認證的編譯器工具鏈，可用於指定 Cortex-M 與 Cortex-R 核心裝置的安全關鍵嵌入式軟體開發。透過整合 Eclipse IDE、進階多核心支援，以及與 TASKING BlueBox 除錯器的相容性，VX 工具套件可簡化開發流程。通過 TÜV NORD 認證，符合 ISO 26262（最高支援 ASIL D）及 ISO 21434 標準。

從：TASKING Germany GmbH
支援產品和硬體
線上培訓

C28X-ACADEMY — C28X-ACADEMY

The C28x Academy is a great resource for developers to learn about C28x-based C2000 real-time microcontrollers. The Academy delivers informational training modules as well as hands-on lab exercises that span a variety of topics.
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
作業系統 (OS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS

SAFERTOS® 是專為嵌入式處理器設計的獨特即時作業系統。經 TÜV SÜD 預先認證，符合 IEC 61508 SIL3 與 ISO 26262 ASILD 標準。SAFERTOS® 是由 WHIS 專家團隊專為安全而打造，適用於全球重要安全應用。WHIS 與德州儀器的合作已經超過十年。在此期間，WHIS 已將 SAFERTOS® 移植至各種 TI 處理器，支援所有熱門核心，並可依要求提供其他架構。SAFERTOS® 專為您的特定處理器/編譯器組合量身打造，隨附完整的原始程式碼與設計保證包，可完全一目了然整個設計生命週期。許多 WHIS 客戶開始使用 FreeRTOS (...)

從：WITTENSTEIN High Integrity Systems
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
軟體程式設計工具

PLEXIM-3P-PLECS-CODER — 具有 TI C2000 目標支援套件的 Plexim PLECS Coder

配備 TI C2000 目標支援套件的 PLECS Coder，簡化了電力電子和電力驅動應用的 C2000 微控制器編程程序。PLECS Coder 旨在讓嵌入式軟體開發容易取得並提升效率，彌補控制設計與硬體實作之間的差距。無論您是經驗豐富的開發人員，或是微控制器編程新手，PLECS Coder 都能以最快方式將控制電路圖轉換為有效的 MCU 程式碼。這包括以標準 PLECS 函式庫元件建置的使用者定義控制演算法本身之程式碼，以及感測、致動及通訊所需的各種晶片內建週邊設備和通訊協定介面配置。除了直接從 PLECS 對目標裝置進行編程外，還可以建置為範本 Coder Composer (...)

從：Plexim GmbH
支援產品和硬體
模擬型號

F280037C, F280037, F280034, F280033 PT BSDL Model

SPRM796.ZIP (2 KB) - BSDL 模型
支援產品和硬體
模擬型號

F280037C, F280037, F280034, F280033 PT IBIS Model

SPRM794.ZIP (216 KB) - IBIS 模型
支援產品和硬體
模擬型號

F280039C, F280039, F280037C, F280037, F280034, F280033 PM BSDL Model

SPRM797.ZIP (2 KB) - BSDL 模型
支援產品和硬體
模擬型號

F280039C, F280039, F280037C, F280037, F280034, F280033 PM IBIS Model

SPRM791.ZIP (216 KB) - IBIS 模型
支援產品和硬體
模擬型號

F280039C, F280039, F280037C, F280037, F280034, F280033 PN BSDL Model

SPRM799.ZIP (2 KB) - BSDL 模型
支援產品和硬體
模擬型號

F280039C, F280039, F280037C, F280037, F280034, F280033 PN IBIS Model

SPRM793.ZIP (216 KB) - IBIS 模型
支援產品和硬體
模擬型號

F280039C, F280039, F280037C, F280037, F280034, F280033 PZ BSDL Model

SPRM800.ZIP (2 KB) - BSDL 模型
支援產品和硬體
模擬型號

F280039C, F280039, F280037C, F280037, F280034, F280033 PZ IBIS Model

SPRM795.ZIP (217 KB) - IBIS 模型
支援產品和硬體
設計工具

C2000-3P-SEARCH — C2000 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)

支援產品和硬體
設計工具

CDNS-3P-MIDAS-SAFETY — MIDAS Safety Platform and Report Creator

The Midas Safety Platform provides early phase exploration of functional safety architectures and leverages native chip design data to perform accurate safety analysis efficiently. The platform is a unified solution available across Cadence products, and with its modular architecture, it supports (...)

從：Cadence Design Systems
支援產品和硬體

許多 TI 參考設計包含 TMS320F280033

使用我們的參考設計選擇工具，以檢視並找出最適合您的應用和參數的設計。
封裝 針腳 CAD 符號、佔位空間與 3D 模型
LQFP (PT) 48 Ultra Librarian
LQFP (PN) 80 Ultra Librarian
LQFP (PM) 64 Ultra Librarian
LQFP (PZ) 100 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片