Wireless microcontroller
Low power consumption
Wireless protocol support
High performance radio
Regulatory compliance
MCU peripherals
Security enablers
Development tools and software
Operating range
Package
The SimpleLink™ CC2651P3 device is a single-protocol 2.4-GHz wireless microcontroller (MCU) supporting Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4g, TI 15.4-Stack (2.4 GHz). The CC2651P3 is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.
The CC2651P3 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. The CC2651P3 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBm TX at 101 mA (7x7 package). CC2651P3 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.
The CC2651P3 has a low sleep current of 0.8 µA with RTC and 32KB RAM retention.
Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.
The CC2651P3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1 GHz MCUs, and host MCUs. CC2651P3 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | CC2651P3 SimpleLink™ Single-Protocol 2.4 GHz Wireless MCU With Integrated Power Amplifier datasheet | PDF | HTML | 2022年 3月 30日 |
| * | Errata | CC2651P3 Silicon Errata | PDF | HTML | 2022年 3月 30日 |
| * | User guide | CC13x1x3, CC26x1x3 SimpleLink™ Wireless MCU Technical Reference Manual | PDF | HTML | 2022年 5月 11日 |
| Application note | CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E) | PDF | HTML | 2024年 8月 6日 | |
| Application note | Configuring Bluetooth LE devices for Direct Test Mode | PDF | HTML | 2022年 2月 25日 | |
| Application note | Hardware Migration to CC2651R3 and CC2651P3 | PDF | HTML | 2022年 2月 17日 | |
| Application note | RF PCB Simulation Cookbook | 2019年 1月 9日 | ||
| Application note | TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) | 2017年 2月 28日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
此 LaunchPad™ 開發套件用於加快 SimpleLink™ 多重標準 CC2651P3 無線 MCU 的開發，支援 Bluetooth®、Zigbee® 和 Thread。軟體支援由 SIMPLELINK-LOWPOWER-SDK 軟體開發套件 (SDK) 提供。
μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。
在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。
其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。
Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證 TI 許多無線連線晶片。全球知名的嵌入式系統偵錯解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段： 完整的晶片內建斷點支援；執行階段記憶體存取；快閃記憶體編程和基準計數器。所有內容都是可編寫指令碼，使開發人員能夠一再地重複相同的測試順序。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。經認證的工具資格認證支援套件 (TQSK) 提供便利的全方位方式，鑒定 (...)
WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。
The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)
The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)
The SimpleLink Connect mobile app is an example Bluetooth® Low Energy application for mobile devices that works with:
The app provides a baseline for users to quickly build their (...)
目前的工具 ARM-CGT-CLANG 源自於開源 Clang 編譯器及其支援的 LLVM 基礎架構。舊版專有 (ARM-CGT) 工具處於維護狀態，並將視需要提供錯誤修復。請參閱所使用的軟體開發套件 (SDK) 文件，以確認支援哪些編譯器。一般而言，基於 Clang 的編譯器用於新產品。
Code Composer Studio™ 是適用於 TI 嵌入式裝置的整合式開發環境 (IDE)。開始開發時，建議先從下載 Code (...)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
To get started with the dual-mode Bluetooth® hardware design review process:
The SimpleLink hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback. A simple three-step process for requesting a review as well as links to relevant technical documentation and (...)
一般設計問題應張貼在我們的 E2E 討論區中，然後才能要求 2.4 GHz 硬體設計審查。
請確實備妥下列必要文件，隨硬體設計審查申請表一起傳送：
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
| VQFN (RKP) | 40 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
Apple App Store
Google App Store
The SimpleLink Connect Mobile app is an example Bluetooth® Low Energy application for mobile devices that works with:
The app provides a baseline for users to quickly build their own mobile apps, using iOS or Android. Source code is provided enabling easy customization.
Features:
Hardware Design Review Request Form for SimpleLink 2.4GHz Devices
None
TI 15.4-Stack is an IEEE 802.15.4-based software stack part of the SimpleLink Low Power F2 SDK that supports a Star network topology for wireless applications. TI 15.4-Stack provides a complete end-to-end wireless application development solution to reduce time and cost of getting your product to market.
Hardware Design Review Request Form for SimpleLink 2.4GHz Devices
The SimpleLink™ Low Power F2 Software Development Kit (SDK), formerly known as the CC13xx and CC26xx SDK, delivers components that enable engineers to develop applications on the Texas Instruments SimpleLink CC13xx and CC26xx family of wireless microcontrollers (MCUs). This software toolkit provides a cohesive and consistent software experience for all SimpleLink CC13xx and CC26xx wireless MCU users by packaging essential software components, such as a Bluetooth® Low Energy (LE) protocol stack supporting Bluetooth 5.2, Zigbee 3.0 compliant protocol suite, RF-Proprietary examples, TI 15.4 Stack, TI Wi-SUN FAN Stack, Amazon Sidewalk examples, as well as the TI-RTOS7 and FreeRTOS kernels and TI Drivers in one easy-to-use software package along with example applications and documentation. In addition, the Dynamic Multi-Protocol Manager (DMM) software component enables multiprotocol development on a single SimpleLink wireless MCU.
The SimpleLink MCU portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. With 100 percent code reuse across host MCUs, Wi-Fi™, Bluetooth Low Energy, Sub-1GHz devices and more, choose the MCU or connectivity standard that fits your design. A one-time investment with the SimpleLink software development kit allows you to reuse often, opening the door to create unlimited applications. For more information, visit www.ti.com/simplelink.
This is version 8.32.00.07 of the SimpleLink Low Power F2 SDK. This SDK is also available on GitHub at https://github.com/TexasInstruments/simplelink-lowpower-f2-sdk .
The SysConfig tool is used configure TI software and hardware. For software configuration, SysConfig is used in conjunction with a TI SDK. For PinMux configuration, the tool may be used standalone.
檢查產品詳細資料頁面以確認支援。
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.
CCS v20 is TI’s next generation Integrated Development Environment (IDE) based on Theia IDE framework. CCS v20.4.1 uses a modified version of the Theia-IDE framework and offers a user experience similar to Visual Studio Code™.