首頁 微控制器 (MCU) 與處理器 Microcontrollers 即時數位電源 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
即時數位電源 MCU
最新

F28E120SB

預覽

具有 160MHz、64KB 快閃記憶體、FPU、PGA 的 C2000™ 32 位元 MCU

立即訂購
產品規格表
使用指南
勘誤表

F28E120SB

預覽
產品規格表 立即訂購

產品詳細資料

CPU 1 C28 Frequency (MHz) 160 Flash memory (kByte) 64 RAM (kByte) 16 ADC type 12-bit ADC Total processing (MIPS) 160 Features 32-bit CPU timers, Dual security zones, FPU32, Programmable gain amplifier, Watchdog timer UART 3 CAN (#) 0 PWM (Ch) 8 TI functional safety category Functional Safety-Compliant Number of ADC channels 10, 17 Direct memory access (Ch) 2 SPI 1 QEP 1 USB No Hardware accelerators Floating point unit Edge AI enabled Yes Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, SCI, SPI, UART Operating system BareMetal (No OS), FreeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 24, 26, 36 Number of I2Cs 1
CPU 1 C28 Frequency (MHz) 160 Flash memory (kByte) 64 RAM (kByte) 16 ADC type 12-bit ADC Total processing (MIPS) 160 Features 32-bit CPU timers, Dual security zones, FPU32, Programmable gain amplifier, Watchdog timer UART 3 CAN (#) 0 PWM (Ch) 8 TI functional safety category Functional Safety-Compliant Number of ADC channels 10, 17 Direct memory access (Ch) 2 SPI 1 QEP 1 USB No Hardware accelerators Floating point unit Edge AI enabled Yes Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, SCI, SPI, UART Operating system BareMetal (No OS), FreeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 24, 26, 36 Number of I2Cs 1
VQFN (RHB) 32 25 mm² 5 x 5
  • Real-time processing
  • On-chip memory
    • Up to 128KB (64KW) of single bank flash (ECC-protected)
    • 16KB (8KW) of RAM (Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Internal 32MHz oscillator with up to ±2% accuracy (SYSOSC)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 27 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (8 shared with Analog)
    • 9 digital inputs on analog pins
    • One 2-channel Direct Memory Access (DMA) controller
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • One Inter-integrated Circuit (I2C) interface

    • One high-speed (20Mbps) Universal Asynchronous Receiver/Transmitter (UART)

    • One Serial Peripheral Interface (SPI) port
    • Two UART-compatible Serial Communication Interfaces (SCIs)
  • Analog system
    • One 8.9 MSPS, 12-bit Analog-to-Digital Converter (ADC)
      • Up to 17 external channels (8 shared with GPIO)
      • Three integrated Post-Processing Blocks (PPB)
    • Three windowed comparators (CMPSS_LITE) with 10-bit effective reference DACs
      • Digital glitch filters
      • One DAC output (CMP3_LITE_DACL) available on a pin
    • One Programmable Gain Amplifier (PGA)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Inputs with 3-to-1 multiplexer
      • Programmable output filtering
  • Enhanced control peripherals
    • 2 MCPWM modules, 8 total PWM channels (one 6-channel MCPWM module and one 2-channel module)
    • One Enhanced Capture (eCAP) module
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
  • CMAC Keys (128-bit) for SW AES
  • Package options:
    • 48-pin Low-Profile Quad Flat Pack (LQFP) [PT suffix]
    • 32-pin Low-Profile Quad Flat Pack (LQFP) [VFC suffix]
    • 32-pin Very Thin Quad Flatpack No-Lead (VQFN) [RHB suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 125°C
  • Real-time processing
  • On-chip memory
    • Up to 128KB (64KW) of single bank flash (ECC-protected)
    • 16KB (8KW) of RAM (Parity-protected)
    • Security
      • JTAGLOCK
      • Zero-pin boot
      • Dual-zone security
  • Clock and system control
    • Internal 32MHz oscillator with up to ±2% accuracy (SYSOSC)
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Brownout reset (BOR) circuit
  • System peripherals
    • 27 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (8 shared with Analog)
    • 9 digital inputs on analog pins
    • One 2-channel Direct Memory Access (DMA) controller
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Unique Identification (UID) number
  • Communications peripherals
    • One Inter-integrated Circuit (I2C) interface

    • One high-speed (20Mbps) Universal Asynchronous Receiver/Transmitter (UART)

    • One Serial Peripheral Interface (SPI) port
    • Two UART-compatible Serial Communication Interfaces (SCIs)
  • Analog system
    • One 8.9 MSPS, 12-bit Analog-to-Digital Converter (ADC)
      • Up to 17 external channels (8 shared with GPIO)
      • Three integrated Post-Processing Blocks (PPB)
    • Three windowed comparators (CMPSS_LITE) with 10-bit effective reference DACs
      • Digital glitch filters
      • One DAC output (CMP3_LITE_DACL) available on a pin
    • One Programmable Gain Amplifier (PGA)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Inputs with 3-to-1 multiplexer
      • Programmable output filtering
  • Enhanced control peripherals
    • 2 MCPWM modules, 8 total PWM channels (one 6-channel MCPWM module and one 2-channel module)
    • One Enhanced Capture (eCAP) module
    • One Enhanced Quadrature Encoder Pulse (eQEP) module with support for CW/CCW operation modes
  • CMAC Keys (128-bit) for SW AES
  • Package options:
    • 48-pin Low-Profile Quad Flat Pack (LQFP) [PT suffix]
    • 32-pin Low-Profile Quad Flat Pack (LQFP) [VFC suffix]
    • 32-pin Very Thin Quad Flatpack No-Lead (VQFN) [RHB suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 125°C

The F28E12x is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in motor drive applications.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 160MHz of signal-processing performance for fixed-point code running from either on-chip flash or SRAM.

The F28E12x supports up to 128KB (64KW) of flash memory. Up to 16KB (8KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F28E12x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Eight PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and UART) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000 real-time microcontrollers page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the LAUNCHXL-F28E12X development kit and download C2000Ware.

The F28E12x is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in motor drive applications.

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 160MHz of signal-processing performance for fixed-point code running from either on-chip flash or SRAM.

The F28E12x supports up to 128KB (64KW) of flash memory. Up to 16KB (8KW) of on-chip SRAM is also available to supplement the flash memory.

High-performance analog blocks are integrated into the F28E12x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Eight PWM channels enable control of various power stages from a 3-phase inverter to power-factor correction and other advanced multilevel power topologies.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, and UART) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000 real-time microcontrollers page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the LAUNCHXL-F28E12X development kit and download C2000Ware.
filter 尋找其它 即時數位電源 MCU
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
重要文件 類型 標題 格式選項 日期
* Data sheet F28E12x Real-Time Microcontrollers datasheet (Rev. B) PDF | HTML 2025年 10月 22日
* Errata F28E12x Real-Time MCUs Silicon Errata (Rev. A) PDF | HTML 2025年 10月 30日
* User guide F28E12x Real-Time Microcontrollers Technical Reference Manual (Rev. A) PDF | HTML 2025年 10月 31日
User guide TMS320F28E12x Flash API Version 5.00.00.00 Reference Guide PDF | HTML 2025年 9月 25日
User guide Migration Between TMS320F280015x, TMS320F280013x, and F28E12x Guide PDF | HTML 2025年 8月 6日
User guide Migration Between TMS320F2802x, TMS320F2803x and F28E12x Guide PDF | HTML 2025年 8月 6日
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. U) PDF | HTML 2025年 7月 11日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LAUNCHXL-F28E12X — C2000™ 即時 MCU F28E12x LaunchPad™ 開發套件

LAUNCHXL-F28E12X 是適用於 Texas Instruments C2000™ 即時微控制器 (MCU) 系列 F28E12x 裝置的低成本開發板。LAUNCHXL-F28E12X 是圍繞 F28E120SC 即時 MCU 所設計，強調控制、類比和通訊週邊設備，以及整合式非揮發性記憶體。此 LaunchPad™ 亦配備一組 BoosterPack 擴充連接器 (40 針腳)、一組 5V 編碼器介面 (eQEP) 連接器、電源域隔離，以及一個板載 XDS110 偵錯探針。此評估板可做為單一 LaunchPad™ 開發工具，適合較小的記憶體版本 (F28E120SB) 和 (...)
使用指南: PDF | HTML
TI.com 無法提供
開發板

TIEVM-MTR-HVINV — 適用於高電壓 3 相位逆變器馬達控制的 C2000™ MCU 評估模組

TIEVM-MTR-HVINV 是一款適合高電壓馬達驅動應用的 750W 開發電路板。此 EVM 透過 InstaSPIN-FOC FAST 和 eSMO 無感測器估測器，實現了三相永磁同步馬達 (PMSM) 的無感測器 FOC 控制。模組化設計支援隨插即用，能夠將不同子板附加至同一主機板。此 EVM 的硬體和韌體經過測試且可立即使用，有助於加快開發時間，設計詳細資訊和測試結果請見本使用指南。

使用指南: PDF | HTML
TI.com 無法提供
偵錯探測器

TMDSEMU110-U — XDS110 JTAG 偵錯探測器

德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。  對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。

德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)

使用指南: PDF
TI.com 無法提供
軟體開發套件 (SDK)

C2000WARE — C2000Ware for C2000 Microcontrollers

C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.

  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
支援產品和硬體

支援產品和硬體
瀏覽 下載選項
軟體開發套件 (SDK)

C2000WARE-MOTORCONTROL-SDK — MotorControl software development kit (SDK) for C2000™ MCUs

MotorControl SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 real-time controller based motor control system development time targeted for various three-phase motor control applications. The software (...)

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
線上培訓

C28X-ACADEMY — C28X-ACADEMY

The C28x Academy is a great resource for developers to learn about C28x-based C2000 real-time microcontrollers. The Academy delivers informational training modules as well as hands-on lab exercises that span a variety of topics.
支援產品和硬體

支援產品和硬體
瀏覽
模擬型號

F28E120Sx BDSL Models

SLLM513.ZIP (5 KB) - BSDL Model
下載
模擬型號

F28E120Sx IBIS Models

SLLM512.ZIP (1176 KB) - IBIS Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片