首頁 無線連線 長距離 Sub-1 GHz 產品 Sub-1 GHz 無線 MCU
首頁
無線連線
長距離 Sub-1 GHz 產品
Sub-1 GHz 無線 MCU

CC1352P7

現行
立即訂購
產品規格表
使用指南

CC1352P7

現行
產品規格表 立即訂購

產品詳細資料

Protocols 6LoWPAN, Amazon Sidewalk, Bluetooth low energy, IEEE 802.15.4, MIOTY, Matter, Proprietary, Proprietary 2.4 GHz, Thread, Wi-SUN, Wireless M-Bus, Zigbee Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1069-1329, 2360-2500, 431-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 20 RAM (kByte) 152 Flash memory (kByte) 704 Security Cryptographic acceleration, Device attestation & anti-counterfeit, Secure boot, Secure debug, Secure firmware & software update Cryptographic accelerators AES, ECC, RSA, SHA-2, TRNG CPU Arm® Cortex®-M4F Operating system FreeRTOS, RTOS, TI RTOS Peripherals 12-bit ADC 8-channel, 2 SPI, 2 UART, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Sensitivity (best) (dBm) -121 Number of GPIOs 26 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled Edge AI Studio enabled, Yes
Protocols 6LoWPAN, Amazon Sidewalk, Bluetooth low energy, IEEE 802.15.4, MIOTY, Matter, Proprietary, Proprietary 2.4 GHz, Thread, Wi-SUN, Wireless M-Bus, Zigbee Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 1069-1329, 2360-2500, 431-527, 861-1054 Type Wireless MCU TX power (max) (dBm) 20 RAM (kByte) 152 Flash memory (kByte) 704 Security Cryptographic acceleration, Device attestation & anti-counterfeit, Secure boot, Secure debug, Secure firmware & software update Cryptographic accelerators AES, ECC, RSA, SHA-2, TRNG CPU Arm® Cortex®-M4F Operating system FreeRTOS, RTOS, TI RTOS Peripherals 12-bit ADC 8-channel, 2 SPI, 2 UART, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller Sensitivity (best) (dBm) -121 Number of GPIOs 26 Rating Catalog Operating temperature range (°C) -40 to 105 Edge AI enabled Edge AI Studio enabled, Yes
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4F processor
  • 704KB flash program memory
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM
  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation
  • Dual-band Sub-1 GHz and 2.4 GHz operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4KB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 2.63 mA active mode, CoreMark
    • 55 µA/MHz running CoreMark
    • 0.8 µA standby mode, RTC, 144KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption:
    • 25.2 µA in 2 MHz mode
    • 701 µA in 24 MHz mode
  • Radio Consumption:
    • 5.4 mA RX at 868 MHz
    • 6.4 mA RX at 2.4 GHz
    • 21 mA TX at +10 dBm at 2.4 GHz
    • 24.9 mA TX at +14 dBm at 868 MHz
    • 64 mA TX at +20 dBm at 915 MHz
    • 101 mA TX at +20 dBm at 2.4 GHz

Wireless protocol support

High performance radio

  • -121 dBm for 2.5-kbps long-range mode
  • -110 dBm at 50 kbps, 802.15.4, 868 MHz
  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +20 dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 300 328, EN 303 131, EN 303 204, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T108 and STD-T66

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Two UART, two SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128- and 256-bit cryptographic accelerator
  • ECC and RSA public key hardware accelerator
  • SHA2 Accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • -40 to +105°C

Package

  • 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4F processor
  • 704KB flash program memory
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM
  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation
  • Dual-band Sub-1 GHz and 2.4 GHz operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4KB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 2.63 mA active mode, CoreMark
    • 55 µA/MHz running CoreMark
    • 0.8 µA standby mode, RTC, 144KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption:
    • 25.2 µA in 2 MHz mode
    • 701 µA in 24 MHz mode
  • Radio Consumption:
    • 5.4 mA RX at 868 MHz
    • 6.4 mA RX at 2.4 GHz
    • 21 mA TX at +10 dBm at 2.4 GHz
    • 24.9 mA TX at +14 dBm at 868 MHz
    • 64 mA TX at +20 dBm at 915 MHz
    • 101 mA TX at +20 dBm at 2.4 GHz

Wireless protocol support

High performance radio

  • -121 dBm for 2.5-kbps long-range mode
  • -110 dBm at 50 kbps, 802.15.4, 868 MHz
  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +20 dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 300 328, EN 303 131, EN 303 204, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T108 and STD-T66

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Two UART, two SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128- and 256-bit cryptographic accelerator
  • ECC and RSA public key hardware accelerator
  • SHA2 Accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • -40 to +105°C

Package

  • 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
  • RoHS-compliant package

The SimpleLink™ CC1352P7 device is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty , Wi-SUN , proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC1352P7 is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC1352P7 has a software defined radio powered by an Arm® Cortex®-M0, which allows support for multiple physical layers and RF standards. CC1352P7 supports operation in 287 to 351-MHz, 359 to 527-MHz, 861 to 1054-MHz, 1076 to 1315-MHz, and 2360 to 2500-MHz frequency bands. PHY and frequency band switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC1352P7 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBm TX at 101 mA in the 2.4-GHz band, and +20 dBm TX at 64 mA in the Sub-1 GHz band.

The CC1352P7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.

The CC1352P7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC1352P7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC1352P7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

The SimpleLink™ CC1352P7 device is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty , Wi-SUN , proprietary systems, including the TI 15.4-Stack (Sub-1 GHz and 2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC1352P7 is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC1352P7 has a software defined radio powered by an Arm® Cortex®-M0, which allows support for multiple physical layers and RF standards. CC1352P7 supports operation in 287 to 351-MHz, 359 to 527-MHz, 861 to 1054-MHz, 1076 to 1315-MHz, and 2360 to 2500-MHz frequency bands. PHY and frequency band switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC1352P7 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBm TX at 101 mA in the 2.4-GHz band, and +20 dBm TX at 64 mA in the Sub-1 GHz band.

The CC1352P7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.

The CC1352P7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC1352P7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC1352P7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
filter 尋找其它 Sub-1 GHz 無線 MCU
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
CC1312R7 現行 具有 704-kB 快閃記憶體的 SimpleLink™ Arm® Cortex®-M4F 多協定 Sub-1 GHz 無線 MCU This device is SDK compatible, but removes the dual band and +20dBm PA.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 42
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 CC1352P7 SimpleLink™ High-Performance Multi-Band Wireless MCU With Integrated Power Amplifier datasheet (Rev. A) PDF | HTML 2021/11/30
* 使用指南 CC13x2x7 and CC26x2x7 Technical Reference Manual PDF | HTML 2021/11/24
* 勘誤表 CC1352P7 Silicon Errata (Rev. A) PDF | HTML 2021/11/30
Application brief Enabling Airspace Awareness: Dual-Band ADS-B Passive Reception for Drones PDF | HTML 2026/10/2
網路安全諮詢 Invalid Bluetooth® LE Data Length Extension (DLE) Parameter Leading to DoS PDF | HTML 2026/5/28
網路安全諮詢 Denial of Service during Bluetooth LE authentication and connection PDF | HTML 2026/5/28
應用說明 How to Modify TX and RX Commands Imported/Exported from SysConfig or SmartRF™ Studio PDF | HTML 2026/4/30
應用說明 How to Certify Your Bluetooth Product (Rev. N) PDF | HTML 2025/11/18
應用說明 TI Wi-SUN® Network Performance PDF | HTML 2025/8/1
Product overview TI Wi-SUN® FAN Stack - Software Overview (Rev. B) PDF | HTML 2025/6/9
應用說明 CC2538, CC13xx, and CC26xx Serial Bootloader Interface (Rev. E) PDF | HTML 2024/8/6
使用指南 SimpleLink CC131x and CC135x Family Hardware Migration Guide PDF | HTML 2024/5/2
Application brief Wireless Technologies for Solar Micro Inverters and Trackers (Rev. A) PDF | HTML 2024/4/9
技術文章 TI extends support of Amazon Sidewalk to improve connectivity between homes, neighborhoods and cities PDF | HTML 2023/12/21
應用說明 TI 15.4-Stack Software PDF | HTML 2023/10/17
Application brief Development Platform for a Smart, Connected AC Level 2 EV Charging Station PDF | HTML 2023/7/11
應用說明 Antenna Impedance Measurement and Matching PDF | HTML 2022/3/22
應用說明 Configuring Bluetooth LE devices for Direct Test Mode PDF | HTML 2022/2/25
應用說明 433 to 930-MHz and 2.4-GHz BOM Tunable PCB Antenna PDF | HTML 2022/2/7
應用說明 Connect One TI 15.4 Stack Sensor to Multiple Gateways PDF | HTML 2021/12/20
應用說明 Wide-Band DSSS Mode for FCC Digital Transmission Systems Using CC13x2 (Rev. A) PDF | HTML 2021/11/29
技術文章 4 questions to ask before choosing a Wi-SUN stack PDF | HTML 2021/8/13
技術文章 Seamlessly connect your world with 16 new wireless MCUs for the 2.4-GHz and Sub-1- PDF | HTML 2021/6/4
白皮書 Dynamic Multi-Protocol (DMM) Performance 2021/4/21
白皮書 Exploring Thread and Zigbee for home and building automation PDF | HTML 2021/4/12
應用說明 Finding Settings for New Phy’s for the CC13x0 and CC13x2 Family PDF | HTML 2020/9/14
應用說明 CC13xx IQ Samples (Rev. B) PDF | HTML 2020/8/24
應用說明 Z-Stack Large Mesh Network Performance Using the SimpleLink™ Wireless MCU Family (Rev. B) PDF | HTML 2020/2/5
應用說明 Cryptographic Performance and Energy Efficiency on SimpleLink CC13x2/CC26x2 MCUs PDF | HTML 2020/1/28
應用說明 Ultra-Low Power Sensing Applications With CC13x2/CC26x2 (Rev. B) PDF | HTML 2020/1/27
應用說明 Secure Boot in SimpleLink™ CC13x2/CC26x2 Wireless MCUs PDF | HTML 2019/4/15
Product overview Out-of-box star-network solution: TI 15.4-Stack 2019/1/14
應用說明 Measuring CC13xx and CC26xx current consumption (Rev. D) PDF | HTML 2019/1/10
Product overview Meet the SimpleLink™ Sensor Controller 2019/1/4
Product overview Time Multiplexing: Concurrent Multi-standard Operation 2019/1/3
應用說明 Low-Power ADC Solution for CC13x2 and CC26x2 2018/3/2
白皮書 Thread and Zigbee for home and building automation 2018/3/1
Application brief Single-Chip Flow Metering Solution With the CC13x2R Wireless MCUs PDF | HTML 2018/2/27
Application brief Ultra-Low Power Designs With the CC13x2 and CC26x2 Sensor Controller PDF | HTML 2018/2/27
應用說明 Use of Low-power Zigbee® and Thread With the SimpleLink™ Wireless MCU Family 2018/2/27
應用說明 Sensor Sequencing Using the CC13x2 and CC26x2 Sensor Controller 2017/3/5
應用說明 TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) 2017/2/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LAUNCHXL-CC1352P — 適用 SimpleLink™ 多頻帶無線 MCU 的 CC1352P LaunchPad™ 開發套件

此 LaunchPad 可加速在具備整合式功率放大器和多頻帶無線電支援的裝置上進行開發，可同時進行 Sub-1Ghz 與 2.4-GHz 操作。支援的通訊協定包括 Bluetooth® 低耗能、Sub-1 GHz、Thread、Zigbee、802.15.4 和搭載相容 CC13x2-CC26x2 SDK 的專利 RF。提供具不同 RF 配對網路與功率等級的變化。

LAUNCHXL-CC1352P1：868/915 MHz 高達 20 dBm、2.4 GHz 高達 5 dBm

LAUNCHXL-CC1352P-2*：868/915 MHz 高達 14 dBm、2.4 GHz 高達 20 dBm

(...)

支援產品和硬體
開發板

LP-CC1352P7 — 適用 SimpleLink™ 多頻帶無線 MCU 的 CC1352P7 LaunchPad™ 開發套件

此 LaunchPad™ 開發套件配備整合式功率放大器與多頻帶無線電支援，可同時進行 Sub-1GHz 與 2.4-GHz 操作，並加快裝置上的開發速度。支援的通訊協定包括 Bluetooth® 低耗能、Sub-1 GHz、Thread、Zigbee®、802.15.4 和搭載相容 CC13xx-CC26xx SDK 的專利 RF。提供具不同 RF 配對網路與功率等級的變化。

  • LP-CC1352P7-1：868/915 MHz 高達 20 dBm、2.4 GHz 高達 5 dBm
  • LP-CC1352P7-4：433 MHz 高達 13 dBm、2.4 GHz 高達 10 dBm
支援產品和硬體
開發板

BEAGL-PLAY-SBC — 以 AM62x 為基礎的 BeagleBoard.org Foundation 的 BeaglePlay® 單板電腦

BeaglePlay 是開放原始碼單板電腦，旨在簡化將感測器、致動器、指示器、人性化介面及連線功能新增至可靠嵌入式系統的程序。它具有強大的 64 位四核心處理器和創新的連接選項，包括 WiFi、GB 乙太網路、Sub-GHz 無線和具有資料線供電能力的單對乙太網路。BeaglePlay 相容於 1,000 種現成附加元件和自訂 Debian Linux 映像，可輕鬆進行擴充及自訂。其也包括適用於攝影機和觸控式螢幕顯示器的排線連接，以及適用於電池備援即時時鐘的插座，因此是人機介面設計的理想選擇。BeaglePlay 透過具競爭力的價格及方便使用的設計，為使用者提供正面的開發體驗。 

從：BeagleBoard.org Foundation
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

AMZN-3P-SIDEWALK-TOOLKIT — Amazon Sidewalk 開發工具套件

Amazon Sidewalk 是能夠涵蓋居家內部、建物內部、整個鄰近區域，甚至整個城市使用案例的安全可靠社區網路，運用相容 Amazon Echo 與 Ring 裝置等 Amazon Sidewalk 橋接器，為 IoT 裝置提供雲端連線能力。Amazon Sidewalk 採用適合短距離通訊的 Bluetooth® 低耗能技術，以及適合長距離通訊的 Sub-1 GHz 915 MHz 頻率，在家中和外面都能實現低頻寬與長距離連線。Amazon Sidewalk 運用數百萬參與的 Sidewalk (...)

從：Amazon
支援產品和硬體
開發套件

RFSTAR-3P-CC1352-MODULES — 以 CC1352R CC1352P CC1352P7 為基礎的 RFSTAR 多協定雙頻無線模組

RF-star 超過十年來均是 TI 的無線連線模組第三方 IDH，專門供應以 TI 產品為基礎的各種無線模組及解決方案，例如 BLE、Matter、ZigBee、Thread、Wi-Fi、Sub-1G 與 Wi-SUN。 
RF-TI1352B1 是以 CC1352R MCU 為基礎、RF-TI1352P1 是以 CC1352P 為基礎，而 RF-TI1352P2 則是以 CC1352P7 為基礎，其皆為多協定與雙頻 Sub-1 GHz (800 MHz - 928 MHz) 和 2.4-GHz 無線模組，支援 Matter (僅限 (...)

從：Shenzhen RF-star Technology Co., Ltd.
支援產品和硬體
子卡

BDE-3P-SUB1GHZ — BDE Sub-1Ghz 模組

VDE Technology Inc. 是 TI 認證的第三方模組供應商。BDE 的模組以 TI 的 CC1XXX Sub-1Ghz 無線連線產品為基礎，讓客戶可縮短開發週期、減少設計不確定性、降低產品成本，並能有效推出具競爭力的產品。BDE 專精於提供超低功耗無線通訊技術，例如 Amazon Sidewalk、Wi-SUN、mioty 和無線 M-Bus 給全球的 OEM、系統整合商、裝置製造商和解決方案供應商。

從：BDE Technology Inc.
支援產品和硬體
偵錯探測器

LB-3P-TRACE32-WIRELESS — 適用於無線連線的 Lauterbach TRACE32® 偵錯系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證 TI 許多無線連線晶片。全球知名的嵌入式系統偵錯解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段：   完整的晶片內建斷點支援；執行階段記憶體存取；快閃記憶體編程和基準計數器。所有內容都是可編寫指令碼，使開發人員能夠一再地重複相同的測試順序。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。經認證的工具資格認證支援套件 (TQSK) 提供便利的全方位方式，鑒定 (...)

從：Lauterbach GmbH
支援產品和硬體
Third-party accessory

JIAAN-3P-WIRELESS-MODULES — 適用於 CC2340 和 CC1352 的 Jia An Electronics Technology AN2340SA-B 和 AN1352P7 無線模組

Beijing Jia An Electronics Technology Co., Ltd. 之 Cansec 無線品牌的無線和物聯網 (IoT) 模組。AN2340SA-B 模組是 2.4-GHz Bluetooth® 低耗能 5.3 小型物聯網軟體與硬體解決方案，以 CC2340 SimpleLink™ 32 位元 Arm® Cortex®-M0+ Bluetooth® 低耗能無線微控制器 (MCU) 為基礎。此產品針對低功耗無線通訊最佳化，並具有晶片內建雙映像無線下載 (OAD) 功能。AN1352P7-915PUA-2.4SA (...)

從：Beijing Jia An Electronics Technology CO., LTD.
支援產品和硬體
軟體開發套件 (SDK)

SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices

SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。

支援產品和硬體
軟體開發套件 (SDK)

TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit

The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ARM-CGT — ARM Code Generation Tools - Compiler

The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.

The current tools ARM-CGT-CLANG are derived from the (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ARM-CGT-CLANG — Arm® code generation tools - compiler

The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.

The current tools ARM-CGT-CLANG are derived from the (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
支援產品和硬體
IDE、配置、編譯器或偵錯程式

EDGE-AI-STUDIO-MCU — Edge AI Studio for Microcontrollers

Edge AI Studio is part of the CCStudio™ development tool ecosystem.  Edge AI Studio is a collection of graphical and command line tools designed to accelerate edge AI development on TI processors, microcontrollers, connectivity devices and radar sensors.  It supports both AI-accelerated (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio

Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
線上培訓

SIMPLELINK-ACADEMY-CC13XX-CC26XX — SimpleLink™ CC13xx and CC26xx Academy

SimpleLink™ Academy is an interactive learning experience for TI's wireless protocols. Our hands-on training modules cover all phases of development for LaunchPad™ development kits alongside software development kits (SDKs) in the SimpleLink MCU family.
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
外掛程式

SIMPLELINK-SDK-EDGEAI-PLUGIN — Edge AI Plugin and application support for SimpleLink™ family of devices

SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。

支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
支援軟體

RF-RANGE-ESTIMATOR — RF Range Estimator

This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
支援產品和硬體
計算工具

PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

支援產品和硬體
計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置：

 

資源

支援產品和硬體
設計工具

SUB1GHZ-HW-DESIGN-REVIEW — Hardware design reviews for SimpleLink™ CC1xxx devices

開始使用 SimpleLink ™ Sub-1GHz 硬體設計審審查程序：

  • 步驟 1：申請審查之前，請務必檢閱技術文件與相關產品頁的設計與開發資源（請參閱下方的 CC1xxx 產品頁連結）。
  • 步驟 2：下載並填寫硬體設計審查申請表。
  • 步驟 3：請將填好的硬體設計審查申請表及所需文件以電子郵件傳送至：connectivity-sub1ghz-hw-review@list.ti.com

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。有關用於申請審核的簡單三步驟流程，以及相關技術文件和資源的連結，可在此處找到。

一般設計問題應張貼在我們的 (...)

支援產品和硬體
參考設計

TIDA-010949 — 以 GaN 為基礎，具備有線與無線通訊功能的 600W 太陽能優化器參考設計

此參考設計為太陽能最佳化工具，可支援高達 80V 的輸入電壓及 80V 的輸出電壓，並提供高達 18A 的輸出及輸入電流。此設計使用可配置的四開關降壓升壓轉換器，將面板電流升壓或降壓至串列電流。旁路電路採用智慧型二極體控制器架構設計。

此參考設計包括電源線通訊 (PLC)，同時具備無線通訊功能。數位控制和通訊皆在單一 C2000™ 微控制器 (MCU) 中執行。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGZ) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片