首頁 微控制器 (MCU) 與處理器 Microcontrollers 通用型 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
通用型 MCU

MSPM0G1518

現行

具有雙區 256kB 快閃記憶體、128kB SRAM、2xADC、DAC、3xCOMP 的 80 MHz ARM® Cortex®-M0+ MCU

立即訂購
產品規格表
使用指南

MSPM0G1518

現行
產品規格表 立即訂購

產品詳細資料

CPU Arm Cortex-M0+ Frequency (MHz) 80 Flash memory (kByte) 256 RAM (kByte) 128 ADC type 12-bit SAR Features 5-V-tolerant I/Os, AES encryption, Comparator, DAC, DMA, LIN, MATHACL, RTC UART 5, 6, 7 Security Cryptographic acceleration, Hardware-enforced isolation, Secure boot, Secure communication, Secure debug, Secure firmware & software update, Secure storage, Software IP protection TI functional safety category Functional Safety-Compliant Number of ADC channels 16, 20, 21, 27 SPI 2, 3 Hardware accelerators Trigonometric math accelerator Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface I2C, LIN, SPI, UART Operating system AutoSAR, BareMetal (No OS), FreeRTOS, Zephyr RTOS Nonvolatile memory (kByte) 256 Number of GPIOs 28, 38, 44, 60, 74, 94 Number of I2Cs 3
CPU Arm Cortex-M0+ Frequency (MHz) 80 Flash memory (kByte) 256 RAM (kByte) 128 ADC type 12-bit SAR Features 5-V-tolerant I/Os, AES encryption, Comparator, DAC, DMA, LIN, MATHACL, RTC UART 5, 6, 7 Security Cryptographic acceleration, Hardware-enforced isolation, Secure boot, Secure communication, Secure debug, Secure firmware & software update, Secure storage, Software IP protection TI functional safety category Functional Safety-Compliant Number of ADC channels 16, 20, 21, 27 SPI 2, 3 Hardware accelerators Trigonometric math accelerator Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface I2C, LIN, SPI, UART Operating system AutoSAR, BareMetal (No OS), FreeRTOS, Zephyr RTOS Nonvolatile memory (kByte) 256 Number of GPIOs 28, 38, 44, 60, 74, 94 Number of I2Cs 3
LQFP (PZ) 100 256 mm² (16 mm × 16 mm) VQFN (RGZ) 48 49 mm² (7 mm × 7 mm) LQFP (PM) 64 144 mm² (12 mm × 12 mm) LQFP (PT) 48 81 mm² (9 mm × 9 mm) NFBGA (ZAW) 100 81 mm² (9 mm × 9 mm) VQFN (RHB) 32 25 mm² (5 mm × 5 mm) LQFP (PN) 80 196 mm² (14 mm × 14 mm)
  • Core
    • Arm 32-bit Cortex M0+ CPU with memory protection unit, frequency up to 80MHz
  • PSA-L1 Certification targeted
  • Operating characteristics
    • Extended temperature: –40°C up to 125°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 512KB of flash memory with error correction code (ECC)

      • Dual-bank with address swap for OTA updates

    • 16KB data flash bank with ECC protection
    • 128KB total SRAM
      • SRAM (Bank 0): 64kB SRAM with ECC protection or hardware parity, and retention down to STANDBY mode
      • SRAM (Bank 1): 64kB SRAM with retention down to STOP mode
  • High-performance analog peripherals
    • Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADC) with up to 27 external channels
      • 14-bit effective resolution at 250ksps with hardware averaging
    • Three high-speed comparators (COMP) with integrated 8-bit reference DACs
      • 32ns propagation delay in high-speed mode
      • Support low-power mode operation down to <1µA
    • One 12-bit 1Msps digital-to-analog converter (DAC) with integrated output buffer
    • Programmable analog connections between ADC, COMP and DAC
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 123µA/MHz (CoreMark)
    • SLEEP: 38µA/MHz
    • STOP: 223µA at 4MHz
    • STANDBY: 1.7µA at 32kHz with RTC and SRAM Bank 0 and state retention
    • SHUTDOWN: 92nA with IO wake-up capability
  • Intelligent digital peripherals
    • 12-channel DMA controller
    • Math accelerator supports DIV, SQRT, MAC and TRIG computations
    • Nine timers support up to 28 PWM channels
      • Two 16-bit general-purpose timers support QEI
      • Four 16-bit general-purpose timers support low-power operation in STANDBY mode
      • One 32-bit general-purpose timer
      • Two 16-bit advanced timers with deadband support and complimentary outputs up to 12 PWM channels
    • Two windowed watchdog timers (WWDT), one independent watchdog timer (IWDT)
    • RTC with alarm and calendar mode
  • Enhanced communication interfaces
    • Seven UART interfaces
      • Two supporting LIN, IrDA, DALI, Smart Card, Manchester
      • Three supporting low-power operation in STANDBY mode
    • Three I2C interfaces supporting up to FM+ (1Mbit/s), SMBus/PMBus, and wakeup from STOP mode
    • Three SPI interfaces, with one supporting up to 32Mbits/s
    • Two Controller Area Network (CAN) interfaces support CAN 2.0 A or B and CAN-FD
  • Clock system
    • Internal 4 to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
    • Phase-locked loop (PLL) up to 80MHz
    • Internal 32kHz low-frequency oscillator (LFOSC) with ±3% accuracy
    • External 4 to 48MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator (LFXT)
    • External clock input
  • Data integrity and encryption
    • AES-128/256 accelerator with support for GCM/GMAC, CCM/CBC-MAC, CBC, CTR
    • Secure key storage for up to four AES keys
    • Flexible firewalls for protecting code and data
    • True random number generator (TRNG)
    • Cyclic redundancy checker (CRC-16, CRC-32)
  • Flexible I/O features
    • Up to 94 GPIOs
      • Two 5V-tolerant open-drain IOs
      • Three high-drive IOs with 20mA drive strength
      • Four high-speed IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 100-pin nFBGA (ZAW) (0.8mm pitch)
    • 100-pin LQFP (PZ) (0.5mm pitch)
    • 80-pin LQFP (PN) (0.5mm pitch)
    • 64-pin LQFP (PM) (0.5mm pitch)
    • 48-pin LQFP (PT) (0.5mm pitch)
    • 48-pin VQFN (RGZ) (0.5mm pitch)
    • 42-pin DSBGA (YCJ) (0.35mm pitch) - Preview
    • 32-pin VQFN (RHB) (0.5mm pitch)
  • Family members (also see Device Comparison)
    • MSPM0G1518: 256KB flash, 128KB RAM
    • MSPM0G1519: 512KB flash, 128KB RAM
    • MSPM0G3518: 256KB flash, 128KB RAM
    • MSPM0G3519: 512KB flash, 128KB RAM
  • Development kits and software (also see Tools and Software)
  • Core
    • Arm 32-bit Cortex M0+ CPU with memory protection unit, frequency up to 80MHz
  • PSA-L1 Certification targeted
  • Operating characteristics
    • Extended temperature: –40°C up to 125°C
    • Wide supply voltage range: 1.62V to 3.6V
  • Memories
    • Up to 512KB of flash memory with error correction code (ECC)

      • Dual-bank with address swap for OTA updates

    • 16KB data flash bank with ECC protection
    • 128KB total SRAM
      • SRAM (Bank 0): 64kB SRAM with ECC protection or hardware parity, and retention down to STANDBY mode
      • SRAM (Bank 1): 64kB SRAM with retention down to STOP mode
  • High-performance analog peripherals
    • Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADC) with up to 27 external channels
      • 14-bit effective resolution at 250ksps with hardware averaging
    • Three high-speed comparators (COMP) with integrated 8-bit reference DACs
      • 32ns propagation delay in high-speed mode
      • Support low-power mode operation down to <1µA
    • One 12-bit 1Msps digital-to-analog converter (DAC) with integrated output buffer
    • Programmable analog connections between ADC, COMP and DAC
    • Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 123µA/MHz (CoreMark)
    • SLEEP: 38µA/MHz
    • STOP: 223µA at 4MHz
    • STANDBY: 1.7µA at 32kHz with RTC and SRAM Bank 0 and state retention
    • SHUTDOWN: 92nA with IO wake-up capability
  • Intelligent digital peripherals
    • 12-channel DMA controller
    • Math accelerator supports DIV, SQRT, MAC and TRIG computations
    • Nine timers support up to 28 PWM channels
      • Two 16-bit general-purpose timers support QEI
      • Four 16-bit general-purpose timers support low-power operation in STANDBY mode
      • One 32-bit general-purpose timer
      • Two 16-bit advanced timers with deadband support and complimentary outputs up to 12 PWM channels
    • Two windowed watchdog timers (WWDT), one independent watchdog timer (IWDT)
    • RTC with alarm and calendar mode
  • Enhanced communication interfaces
    • Seven UART interfaces
      • Two supporting LIN, IrDA, DALI, Smart Card, Manchester
      • Three supporting low-power operation in STANDBY mode
    • Three I2C interfaces supporting up to FM+ (1Mbit/s), SMBus/PMBus, and wakeup from STOP mode
    • Three SPI interfaces, with one supporting up to 32Mbits/s
    • Two Controller Area Network (CAN) interfaces support CAN 2.0 A or B and CAN-FD
  • Clock system
    • Internal 4 to 32MHz oscillator (SYSOSC) with up to ±1.2% accuracy
    • Phase-locked loop (PLL) up to 80MHz
    • Internal 32kHz low-frequency oscillator (LFOSC) with ±3% accuracy
    • External 4 to 48MHz crystal oscillator (HFXT)
    • External 32kHz crystal oscillator (LFXT)
    • External clock input
  • Data integrity and encryption
    • AES-128/256 accelerator with support for GCM/GMAC, CCM/CBC-MAC, CBC, CTR
    • Secure key storage for up to four AES keys
    • Flexible firewalls for protecting code and data
    • True random number generator (TRNG)
    • Cyclic redundancy checker (CRC-16, CRC-32)
  • Flexible I/O features
    • Up to 94 GPIOs
      • Two 5V-tolerant open-drain IOs
      • Three high-drive IOs with 20mA drive strength
      • Four high-speed IOs
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 100-pin nFBGA (ZAW) (0.8mm pitch)
    • 100-pin LQFP (PZ) (0.5mm pitch)
    • 80-pin LQFP (PN) (0.5mm pitch)
    • 64-pin LQFP (PM) (0.5mm pitch)
    • 48-pin LQFP (PT) (0.5mm pitch)
    • 48-pin VQFN (RGZ) (0.5mm pitch)
    • 42-pin DSBGA (YCJ) (0.35mm pitch) - Preview
    • 32-pin VQFN (RHB) (0.5mm pitch)
  • Family members (also see Device Comparison)
    • MSPM0G1518: 256KB flash, 128KB RAM
    • MSPM0G1519: 512KB flash, 128KB RAM
    • MSPM0G3518: 256KB flash, 128KB RAM
    • MSPM0G3519: 512KB flash, 128KB RAM
  • Development kits and software (also see Tools and Software)

MSPM0Gx51x microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform, operating at up to 80MHz frequency. These MCUs offer a blend of cost optimization and design flexibility for applications requiring 256KB to 512KB of flash memory in small packages or high pin count packages (up to 100 pins). These devices include dual CAN-FD controllers, cybersecurity enablers, high performance integrated analog, and provide excellent low power performance across the operating temperature range.

The device has up to 512KB of embedded flash program memory with built-in error correction code (ECC) and up to 128KB SRAM (with ECC and parity protection for the first 64kB). The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.

Flexible cybersecurity enablers can be used to support secure boot, secure in-field firmware updates, IP protection (execute-only memory), key storage, and more. Hardware acceleration is provided for a variety of AES symmetric cipher modes, as well as a TRNG entropy source. The cybersecurity architecture is pending Arm® PSA Level 1 certification.

A set of high performance analog modules is provided, such as two simultaneously sampling 12-bit, 4Msps ADCs supporting up to 27 external channels, on-chip voltage reference (1.4V or 2.5V), one 12-bit 1Msps DAC, and three comparators operable in low-power and high-speed modes with additional built-in 8-bit reference DACs .

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0Gx51x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSPM0 Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.

MSPM0Gx51x microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform, operating at up to 80MHz frequency. These MCUs offer a blend of cost optimization and design flexibility for applications requiring 256KB to 512KB of flash memory in small packages or high pin count packages (up to 100 pins). These devices include dual CAN-FD controllers, cybersecurity enablers, high performance integrated analog, and provide excellent low power performance across the operating temperature range.

The device has up to 512KB of embedded flash program memory with built-in error correction code (ECC) and up to 128KB SRAM (with ECC and parity protection for the first 64kB). The flash memory is organized into two main banks to support field firmware updates, with address swap support provided between the two main banks.

Flexible cybersecurity enablers can be used to support secure boot, secure in-field firmware updates, IP protection (execute-only memory), key storage, and more. Hardware acceleration is provided for a variety of AES symmetric cipher modes, as well as a TRNG entropy source. The cybersecurity architecture is pending Arm® PSA Level 1 certification.

A set of high performance analog modules is provided, such as two simultaneously sampling 12-bit, 4Msps ADCs supporting up to 27 external channels, on-chip voltage reference (1.4V or 2.5V), one 12-bit 1Msps DAC, and three comparators operable in low-power and high-speed modes with additional built-in 8-bit reference DACs .

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.

MSPM0Gx51x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSPM0 Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference Manual.
filter 尋找其它 通用型 MCU
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 64
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 MSPM0Gx51x Mixed-Signal Microcontrollers With CAN-FD Interface datasheet (Rev. B) PDF | HTML 2025/10/13
* 使用指南 MSPM0 G-Series 80-MHz Microcontrollers Technical Reference Manual (Rev. E) PDF | HTML 2026/7/28
* 勘誤表 MSPM0Gx51x Mixed-Signal Microcontrollers Errata (Rev. E) PDF | HTML 2026/7/6
應用說明 Live Firmware Update via Flash Bank Swap PDF | HTML 2026/1/30
使用指南 MSPM0 Bootloader User's Guide (Rev. A) PDF | HTML 2026/1/8
應用說明 Cybersecurity Enablers in MSPM0 MCUs (Rev. A) PDF | HTML 2025/12/10
應用說明 EMC Improvement Guide for MSPM0 (Rev. A) PDF | HTML 2025/12/2
應用說明 MSPM0 ADC Noise Analysis and Application (Rev. A) PDF | HTML 2025/11/14
子系統設計 ADC to I2C (Rev. A) PDF | HTML 2025/9/10
子系統設計 Thermistor Temperature Sensing (Rev. A) PDF | HTML 2025/9/9
子系統設計 ADC to UART (Rev. A) PDF | HTML 2025/9/9
使用指南 MSPM0 MCUs Development Guide (Rev. G) PDF | HTML 2025/8/27
子系統設計 ADC to SPI (Rev. A) PDF | HTML 2025/8/27
子系統設計 Digital FIR Filter (Rev. A) PDF | HTML 2025/8/27
子系統設計 Digital IIR Filter (Rev. A) PDF | HTML 2025/8/26
子系統設計 Power Sequencer (Rev. A) PDF | HTML 2025/8/25
子系統設計 5V Interface (Rev. A) PDF | HTML 2025/8/20
子系統設計 Data Sensor Aggregator Subsystem Design (Rev. A) PDF | HTML 2025/8/20
子系統設計 CAN to UART bridge (Rev. A) PDF | HTML 2025/8/19
子系統設計 CAN to SPI Bridge (Rev. A) PDF | HTML 2025/8/19
子系統設計 CAN to I2C Bridge (Rev. A) PDF | HTML 2025/8/19
子系統設計 PWM Control Using Push-Buttons PDF | HTML 2025/8/14
子系統設計 Using MSPM0 as a Watchdog Timer PDF | HTML 2025/8/14
功能安全資訊 Functional Safety Manual for MSPM0Gx51x PDF | HTML 2025/8/13
子系統設計 Emulate EEPROM with FLASH (Type A) (Rev. A) PDF | HTML 2025/8/13
子系統設計 Emulate EEPROM With FLASH (Type B) (Rev. A) PDF | HTML 2025/8/6
子系統設計 Frequency Counter: Tone Detection (Rev. A) PDF | HTML 2025/8/6
類比設計期刊 在馬達控制中選擇位置感測器 PDF | HTML Download English Version PDF | HTML 2025/7/10
子系統設計 Simultaneous Sampling of ADCs PDF | HTML 2025/6/30
應用說明 Capturing PWM 0% to 100% Duty Cycle with MSPM0 MCU PDF | HTML 2025/6/12
應用說明 Migration Guide From STM8 to MSPM0 (Rev. A) PDF | HTML 2025/5/21
應用說明 IAR to CCS Project Porting Guide PDF | HTML 2025/3/15
白皮書 MSPM0 MCU Advantages in Automotive Application PDF | HTML 2025/3/11
應用說明 LIN Basics and Implementation on MSPM0 PDF | HTML 2025/2/21
應用說明 Laser Speckle Reduction Solution in Projector based on MSPM0 MCU PDF | HTML 2025/2/20
使用指南 Migration Guide From NXP to MSPM0 PDF | HTML 2025/2/3
應用說明 Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025/1/29
應用說明 Flash Multi Bank Feature in MSPM0 Family PDF | HTML 2025/1/8
應用說明 BQ79616 Control Based on MSPM0 Through UART to CAN PDF | HTML 2024/12/16
應用說明 MSPM0G3507 Low Power Test and Guidance PDF | HTML 2024/10/18
應用說明 Understanding the MSPM0 Debug Subsystem PDF | HTML 2024/9/23
應用說明 A2L Refrigerant Standard Overview and TI Mitigation Control Board Designs for Designers PDF | HTML 2024/9/16
應用說明 TPS929xxx LED Driver Control Using MSPM0 Through UART Over CAN PDF | HTML 2024/9/4
應用說明 SPI to CAN Bridge on MSPM0 MCUs PDF | HTML 2024/8/28
Application brief Bridge Design Between CAN and UART with MSPM0 MCUs PDF | HTML 2024/6/17
Application brief Bridge Design Between CAN and SPI with MSPM0 MCUs PDF | HTML 2024/6/17
Application brief Bridge Design between CAN and I2C with MSPM0 MCUs 2024/6/17
應用說明 Designing Temperature Monitoring Systems with NTC and RTD PDF | HTML 2024/5/15
Application brief Automotive Seat Comfort Module Using MSPM0 PDF | HTML 2024/5/1
應用說明 Realization of Password-Protected Debug Based on Software PDF | HTML 2024/3/6
技術文章 為什麼互通性對於不斷發展的電動車充電市場很重要 PDF | HTML Download English Version PDF | HTML 2024/1/26
Product overview Realizing UWB Passive Entry Passive Start (PEPS) Design with MSPM0 MCU PDF | HTML 2024/1/12
Product overview Realizing HVAC FAN Control Design with MSPM0 MCU PDF | HTML 2023/12/21
應用說明 MSPM0 Enables Cost-Effective Field Transmitter Applications PDF | HTML 2023/12/15
應用說明 Operating Time of MSPM0 Powered by a Capacitor PDF | HTML 2023/10/3
應用說明 EEPROM Emulation Type A Solution PDF | HTML 2023/4/18
應用說明 EEPROM Emulation Type B Design PDF | HTML 2023/4/11
Application brief Optimizing Field Sensor and Transmitter Applications With MSPM0 MCUs PDF | HTML 2023/3/2
Application brief Increasing Flexibility in Your Battery Management Designs With a Low-Cost MSPM0 PDF | HTML 2023/3/2
Application brief Simplifying Pulse Oximeter Designs With Low-Cost Highly Integrated MSPM0 MCUs PDF | HTML 2023/3/2
應用說明 MSPM0 G-Series MCUs Power Optimization Guide PDF | HTML 2023/2/22
應用說明 Make System Design Easy With MSPM0 Precision Analog PDF | HTML 2023/2/22
白皮書 MSPM0: Idea to Product With Easy-to-Use Tools, Software, and Academy PDF | HTML 2023/2/22
應用說明 MSPM0L or MSPM0G: How to Pick the Right MSP Microcontroller for Your Application PDF | HTML 2022/12/13

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP-MSPM0G3519 — LP-MSPM0G3519 評估模組

LP-MSPM0G3519 LaunchPad™ 開發套件是基於 MSPM0G3519 的易用型評估模組 (EVM)。其包含開始在 MSPM0G3519 M0+ MCU 平台上開發所需的一切，包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板包含三個按鈕、兩個 LED (一個是 RGB LED) 和超過 80 個針腳。運用最佳配置的 ADC 和 DAC 低通濾波器預留位置，以及 Launchpad 背面提供的外部參考選項，改善類比結果。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
偵錯探測器

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

從：TASKING Germany GmbH
支援產品和硬體
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
硬體程式設計工具

C-GANG — 適用於獨立式與整合式快閃且快速可靠的 gang 編程解決方案

C-GANG 是一款低成本的 gang 程式設計工具，可同時編程多達六個相同的目標。本產品相容於各種 TI 微控制器，包括 MSPM0、MSP430 及 C2000 裝置。

從：Elprotronic Inc.
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
軟體開發套件 (SDK)

MSPM0-SDK — MSPM0 Software Development Kit (SDK)

MSPM0 SDK 提供軟體、工具和文件的終極集合，可使用單一軟體套件，加速開發 MSPM0 MCU 平台的應用。

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
支援產品和硬體
IDE、配置、編譯器或偵錯程式

MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers

MSP Zero Code Studio 是一款可簡化韌體開發的視覺設計環境，並且能在數分鐘內設定、開發及執行微控制器應用程式，無須編碼，也不需要 IDE。提供獨立下載或雲端版本。

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

TSK-3P-VX-TOOLSET — 適用於 Arm 的 TASKING VX 工具套件

適用於 Arm 的 VX 工具套件是一套經過認證的編譯器工具鏈，可用於指定 Cortex-M 與 Cortex-R 核心裝置的安全關鍵嵌入式軟體開發。透過整合 Eclipse IDE、進階多核心支援，以及與 TASKING BlueBox 除錯器的相容性，VX 工具套件可簡化開發流程。通過 TÜV NORD 認證，符合 ISO 26262（最高支援 ASIL D）及 ISO 21434 標準。

從：TASKING Germany GmbH
支援產品和硬體
線上培訓

MSPM0-ACADEMY — MSPM0™ academy

MSPM0 Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSPM0 MCU portfolio.
支援產品和硬體
快速入門

CCSTUDIO-STARTHUB — Example application browser

Explore a vast library of example projects, categorized by application type, with support for multiple development environments
支援產品和硬體
快速入門

MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications

MSP 馬達控制為一系列軟體、工具和範例，可在 30 分鐘或更短時間內運用 MSPM0 Arm® Cortex® M0+ MCU 和熱門馬達驅動器解決方案來運轉馬達。

MSP 馬達控制提供可轉動有刷、步進與三相馬達的受支援硬體套件範例，具備最佳性能、整合性與易用性的感測和無感測器控制演算法。透過訂購硬體、連接馬達及使用我們的圖形使用者介面或線上程式碼範例，可隨時運轉您的馬達。

支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
作業系統 (OS)

GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS

The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)

從：Green Hills Software
支援產品和硬體
驅動程式或資料庫

MSPM0-DIAGNOSTIC-LIB — MSPM0 diagnostic library

MSPM0 診斷資料庫軟體開發套件 (SDK) 是一系列功能安全軟體，可協助客戶滿足功能安全診斷需求。

支援產品和硬體
驅動程式或資料庫

MSPM0-DIAGNOSTIC-LIB — MSPM0 diagnostic library

MSPM0 診斷資料庫軟體開發套件 (SDK) 是一系列功能安全軟體，可協助客戶滿足功能安全診斷需求。

支援產品和硬體
開發模組 (EVM) 的 GUI

MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0

MSPM0 類比配置器是一款圖形配置工具，旨在使用 MSPM0 裝置簡化和加速類比訊號鏈的設計和實現，無需進行傳統的程式碼開發。

此工具使用直覺式 GUI，透過 MSPM0 裝置的高類比整合配置訊號鏈，即時分析和繪製訊號，並產生快閃裝置所需的配置和程式碼。

支援產品和硬體
軟體程式設計工具

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
LQFP (PZ) 100 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian
LQFP (PM) 64 Ultra Librarian
LQFP (PT) 48 Ultra Librarian
NFBGA (ZAW) 100 Ultra Librarian
VQFN (RHB) 32 Ultra Librarian
LQFP (PN) 80 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片