首頁 微控制器 (MCU) 與處理器 Microcontrollers 感測 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
感測 MCU

MSP430F67641

現行

具有 3 個 Sigma-Delta ADC、10 位元 SAR ADC、LCD、128KB 快閃記憶體和 8KB RAM 的低成本多向量測 SoC

立即訂購
產品規格表

MSP430F67641

現行
產品規格表 立即訂購

產品詳細資料

CPU MSP430 Frequency (MHz) 25 Flash memory (kByte) 128 RAM (kByte) 8 ADC type 24-bit Sigma Delta Features Advanced sensing, LCD, Real-time clock UART 3 Security Secure debug Number of ADC channels 3 SPI 4 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Hardware accelerators 0 Nonvolatile memory (kByte) 128 Number of GPIOs 72 Number of I2Cs 1
CPU MSP430 Frequency (MHz) 25 Flash memory (kByte) 128 RAM (kByte) 8 ADC type 24-bit Sigma Delta Features Advanced sensing, LCD, Real-time clock UART 3 Security Secure debug Number of ADC channels 3 SPI 4 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Hardware accelerators 0 Nonvolatile memory (kByte) 128 Number of GPIOs 72 Number of I2Cs 1
LQFP (PN) 80 196 mm² (14 mm × 14 mm) LQFP (PZ) 100 256 mm² (16 mm × 16 mm)
  • Accuracy <0.5% Over 2000:1 Dynamic Range for Phase Current
  • Meets or Exceeds ANSI C12.20 and IEC 63053 Standards
  • Support for Multiple Sensors Such as Current Transformers, Rogowski Coils, or Shunts
  • Power Measurement for up to Three Phases
  • Four-Quadrant Measurement per Phase or Cumulative
  • Exact Phase Angle Measurements
  • Digital Phase Correction for Current Transformers
  • 40-Hz to 70-Hz Line Frequency Range Using Single Calibration
  • Flexible Power Supply Options With Automatic Switching
  • Display Operates at Very Low Power During AC Mains Failure: 3 µA in LPM3
  • Real-Time Clock (RTC) Module Operates From Dedicated Power Supply (AUXVCC3) and Offers Integrated Offset and Temperature Calibration Features
  • Multiple Communication Interfaces for Smart Meter Implementations
  • High-Performance 25-MHz CPU With 32-Bit Multiplier
  • Up to 128KB of Flash With Single-Cycle Execution
  • Up to 8KB of RAM With Single-Cycle Access
  • Up to Three Independent 24-Bit Sigma-Delta ADCs With Differential Inputs and Variable Gain
  • System Analog-to-Digital Converter (ADC):
    10-Bit 200-ksps 6-Channel Plus Temperature Sensor and Supply Measurement
  • Wide Input Supply Voltage Range:
    1.8 V to 3.6 V
  • Ultra-Low-Power Consumption During Energy Measurement
    • 3.0 mW at 10-MHz Operation (3.0 V)
  • Multiple Low-Power Modes
    • Standby Mode (LPM3): 2.5 µA at 3 V, Wake up in 3 µs (Typical)
    • RTC Mode (LPM3.5): 1.24 µA at 3 V (Typical)
    • Shutdown Mode (LPM4.5): 0.78 µA at 3 V (Typical)
  • LCD Driver With Contrast Control for up to 320 Segments
  • Password-Protected RTC With Crystal Offset Calibration and Temperature Compensation
  • Four Communications Ports
    • Configurable Among Four UART, Three SPI, and One I2C Interfaces
  • Four 16-Bit Timers With Nine Capture/Compare Registers
  • 100-Pin LQFP (PZ) Package with 72 I/O Pins
  • 80-Pin LQFP (PN) Package with 52 I/O Pins
  • Industrial Temperature Range of –40°C to 85°C
  • Development Tool (Also See Tools and Software)
  • Accuracy <0.5% Over 2000:1 Dynamic Range for Phase Current
  • Meets or Exceeds ANSI C12.20 and IEC 63053 Standards
  • Support for Multiple Sensors Such as Current Transformers, Rogowski Coils, or Shunts
  • Power Measurement for up to Three Phases
  • Four-Quadrant Measurement per Phase or Cumulative
  • Exact Phase Angle Measurements
  • Digital Phase Correction for Current Transformers
  • 40-Hz to 70-Hz Line Frequency Range Using Single Calibration
  • Flexible Power Supply Options With Automatic Switching
  • Display Operates at Very Low Power During AC Mains Failure: 3 µA in LPM3
  • Real-Time Clock (RTC) Module Operates From Dedicated Power Supply (AUXVCC3) and Offers Integrated Offset and Temperature Calibration Features
  • Multiple Communication Interfaces for Smart Meter Implementations
  • High-Performance 25-MHz CPU With 32-Bit Multiplier
  • Up to 128KB of Flash With Single-Cycle Execution
  • Up to 8KB of RAM With Single-Cycle Access
  • Up to Three Independent 24-Bit Sigma-Delta ADCs With Differential Inputs and Variable Gain
  • System Analog-to-Digital Converter (ADC):
    10-Bit 200-ksps 6-Channel Plus Temperature Sensor and Supply Measurement
  • Wide Input Supply Voltage Range:
    1.8 V to 3.6 V
  • Ultra-Low-Power Consumption During Energy Measurement
    • 3.0 mW at 10-MHz Operation (3.0 V)
  • Multiple Low-Power Modes
    • Standby Mode (LPM3): 2.5 µA at 3 V, Wake up in 3 µs (Typical)
    • RTC Mode (LPM3.5): 1.24 µA at 3 V (Typical)
    • Shutdown Mode (LPM4.5): 0.78 µA at 3 V (Typical)
  • LCD Driver With Contrast Control for up to 320 Segments
  • Password-Protected RTC With Crystal Offset Calibration and Temperature Compensation
  • Four Communications Ports
    • Configurable Among Four UART, Three SPI, and One I2C Interfaces
  • Four 16-Bit Timers With Nine Capture/Compare Registers
  • 100-Pin LQFP (PZ) Package with 72 I/O Pins
  • 80-Pin LQFP (PN) Package with 52 I/O Pins
  • Industrial Temperature Range of –40°C to 85°C
  • Development Tool (Also See Tools and Software)

The TI MSP430F676x1 polyphase metering SoCs are powerful highly integrated solutions for revenue meters that offer accuracy and low system cost with few external components. The F676x1 uses the low-power MSP430™ CPU with a 32-bit multiplier to perform all energy calculations, metering applications such as tariff rate management, and communications with AMR or AMI modules. The F676x1 features TI’s 24-bit sigma-delta converter technology, which provides better than 0.5% accuracy. Family members include up to 128KB of flash and 8KB of RAM and an LCD controller with support for up to 320 segments.

The ultra-low-power nature of the F676x1 means that the system power supply can be minimized to reduce overall cost. Lowest standby power means that backup energy storage can be minimized, and critical data retained longer in case of a mains power failure. The F676x1 family executes the TI energy measurement software library, which calculates all relevant energy and power results. The energy measurement software library is available with the F676x1 at no cost. Industry standard development tools and hardware platforms are available to speed development of meters that meet all of the ANSI and IEC standards globally.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User’s Guide.

The TI MSP430F676x1 polyphase metering SoCs are powerful highly integrated solutions for revenue meters that offer accuracy and low system cost with few external components. The F676x1 uses the low-power MSP430™ CPU with a 32-bit multiplier to perform all energy calculations, metering applications such as tariff rate management, and communications with AMR or AMI modules. The F676x1 features TI’s 24-bit sigma-delta converter technology, which provides better than 0.5% accuracy. Family members include up to 128KB of flash and 8KB of RAM and an LCD controller with support for up to 320 segments.

The ultra-low-power nature of the F676x1 means that the system power supply can be minimized to reduce overall cost. Lowest standby power means that backup energy storage can be minimized, and critical data retained longer in case of a mains power failure. The F676x1 family executes the TI energy measurement software library, which calculates all relevant energy and power results. The energy measurement software library is available with the F676x1 at no cost. Industry standard development tools and hardware platforms are available to speed development of meters that meet all of the ANSI and IEC standards globally.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User’s Guide.
filter 尋找其它 感測 MCU
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
MSP430F67641A 現行 具有 3 個 Sigma-Delta ADC、10 位元 SAR ADC、LCD、128KB 快閃記憶體和 8KB RAM 的低成本多向量測 SoC This product has the same memory, peripherals including the sigma-delta ADC(s), and pin-out configuration while incorporating several errata improvements.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 MSP430F676x1 Polyphase Metering SoCs datasheet (Rev. A) PDF | HTML 2018/10/3
* 勘誤表 MSP430F67641 Microcontroller Errata (Rev. V) PDF | HTML 2021/6/11
應用說明 Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2025/6/2
應用說明 ESD Diode Current Specification (Rev. B) PDF | HTML 2021/8/23
應用說明 MSP430 System-Level ESD Considerations (Rev. B) PDF | HTML 2021/7/14
使用指南 MSP430 MCUs Development Guide Book (Rev. A) PDF | HTML 2021/5/13
應用說明 Answers to Common Sigma-Delta ADC Questions on MSP MCUs PDF | HTML 2020/8/11
應用說明 MSP430 System ESD Troubleshooting Guide PDF | HTML 2019/12/13
使用指南 MSP430x5xx and MSP430x6xx Family User's Guide (Rev. Q) 2018/3/15
技術文章 Quantifying harmonic distortion - Effect of sinc3 filter roll off (part 3) PDF | HTML 2017/8/7
應用說明 General Oversampling of MSP ADCs for Higher Resolution (Rev. A) PDF | HTML 2016/4/1
應用說明 MSP Code Protection Features PDF | HTML 2015/12/7
應用說明 Implementation of a Low-Cost Three-Phase Watt-Hour Meter Using the MSP430F67641 (Rev. C) 2015/8/5
應用說明 Designing With MSP430™ MCUs and Segment LCDs (Rev. A) PDF | HTML 2015/7/20

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

EVM430-F67641 — 具有 MSP430F67641 SoC 的多相電錶

此 EVM 採用 MSP430F67641 多相量測系統單晶片，實作完整的智慧電表設計。此設計符合 ANSI/IEC Class 0.5 準確度的所有要求。F67641 SoC 搭載 128KB 晶片快閃記憶體及 320 區段 LCD 控制器，可作為單晶片解決方案，因應低成本多相電表設計挑戰。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
硬體程式設計工具

MSP-FET — MSP MCU 程式設計工具和偵錯器

MSP-FET 是一款強大的模擬開發工具，通常稱為偵錯探測器，可讓使用者快速展開 MSP 低功耗微控制器 (MCU) 的開始工作。

它支援透過 JTAG 和 SBW 介面進行編程和即時偵錯。此外，MSP-FET 也能在電腦 USB 介面與 MSP UART 間提供後通道 UART 連接。這為 MSP 程式設計工具提供了一種便利的方法，能在 MSP 和電腦上執行的終端之間進行串行通訊。它也支援透過 UART 和 I2C 通訊協定，使用 BSL（自舉式載入程式）將程式（通常稱為韌體）載入到 MSP 目標。

USB 介面可將 MSP-FET 連接至電腦，而 14 針腳連接器則可存取 MSP (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
軟體開發套件 (SDK)

MSP430-SDK — 適用於 MSP430 微控制器的 MSP430-SDK

MSP430-SDK 資源集可協助使用者為 MSP430 微控制器 (MCU) 編寫有效程式碼。這些資源支援所有 MSP430 微控制器。就像有位使用者提到的，「基本上就是讓開發人員擁有成為 MSP430 微控制器專家所需的一切！」

此設計資源集合包括各式各樣的高度抽象軟體函式庫任君選擇，內容包含裝置和週邊設備專用函式庫 (如 MSP430 驅動器函式庫)，乃至圖形與電容式觸控函式庫等應用程式專用函式庫。MSP430 驅動器函式庫尤為重要，其可協助軟體開發人員運用便利的 API 來控制低階複雜的硬體週邊設備，讓產生的程式碼更容易讀取及維護。MSP (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ENERGYTRACE — EnergyTrace 技術

EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench delivers a complete development toolchain for building and debugging embedded applications for your selected target microcontroller. The included IAR C/C++ Compiler generates highly optimized code for your application, and the C-SPY Debugger is a fully integrated debugger for (...)

從：IAR Systems
支援產品和硬體
線上培訓

MSP430-ACADEMY — MSP430™ academy

MSP430™ Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 MCU portfolio.
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
作業系統 (OS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS

SAFERTOS® 是專為嵌入式處理器設計的獨特即時作業系統。經 TÜV SÜD 預先認證，符合 IEC 61508 SIL3 與 ISO 26262 ASILD 標準。SAFERTOS® 是由 WHIS 專家團隊專為安全而打造，適用於全球重要安全應用。WHIS 與德州儀器的合作已經超過十年。在此期間，WHIS 已將 SAFERTOS® 移植至各種 TI 處理器，支援所有熱門核心，並可依要求提供其他架構。SAFERTOS® 專為您的特定處理器/編譯器組合量身打造，隨附完整的原始程式碼與設計保證包，可完全一目了然整個設計生命週期。許多 WHIS 客戶開始使用 FreeRTOS (...)

從：WITTENSTEIN High Integrity Systems
支援產品和硬體
程式碼範例或展示

SLAC647 — MSP430F67641, MSP430F67621 Code Examples

支援產品和硬體
驅動程式或資料庫

MSP-DSPLIB — Digital Signal Processing (DSP) Library for MSP Microcontrollers

TI MSP430™ 數位訊號處理庫是一組針對 MSP430 微控制器最佳化的函數，用於執行常見的訊號處理操作。這些函數用於需要即時進行高準確度且低功耗的密集運算轉換的應用場景中。該庫對 MSP430 MCU 固有的硬體進行了最佳化利用，用於固定點數學運算，從而實現顯著的性能提升。

支援產品和硬體
驅動程式或資料庫

MSP-GRLIB — MSP Graphics Library

The MSP Graphics Library is a royalty-free set of graphics primitives for displaying images or creating graphical user interfaces (GUIs) on MSP430 and MSP432 microcontroller-based boards that use a graphical display. The graphics library consists of two functional layers: 1) the display driver (...)

支援產品和硬體
驅動程式或資料庫

MSPMATHLIB — 適用於 MSP430 的浮點數學函式庫

MSPMathLib is an accelerated floating point math library for MSP430™ MCUs that delivers up to 26x faster computation for the most commonly used math functions. The library seamlessly integrates with projects to replace floating point math functions such as sin, cos, tan, log, exp and sqrt, (...)

支援產品和硬體
軟體程式設計工具

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
支援產品和硬體
軟體程式設計工具

MSP430-FLASHER — Command Line Programmer for MSP430™ and SimpleLink™ MSP432™ MCUs

MSPFlasher 是開放原始碼、殼層式（命令行）介面，用於透過 JTAG 編程 MSP430™ 和 MSP432™ 微控制器 (MCU)，並提供最常見的編程功能。MSP Flasher 可用於將二進位檔案直接下載至記憶體，無需 CCS 或 IAR 等 IDE。它還可用於擷取韌體和永久鎖定 JTAG 存取。

支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
設計工具

MSP-3P-SEARCH — MSP 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

支援產品和硬體
參考設計

TIDA-00601 — 具有隔離分流感測器的多相能源量測參考設計

TIDA-00601 參考設計實作了具有隔離式分流感測器的 0.5% 級三相電能量測系統。  隔離的方式是透過使用隔離式 ΔΣ 調變器，將輸出電路與輸入電路電容隔離。  電能量測 SoC 從隔離式調變器中取得不同的位元串流，並使用其板載數位濾波器產生 ADC 取樣讀數。  電能量測 SoC 也可用於感測電壓、計算量測參數值、驅動電路板的 LCD，以及透過電路板的隔離式 RS-232 電路與 PC GUI 通訊。

此參考設計使用 ISO7420 和 ISO7421。此參考設計也可搭配 ISO7320C 和 ISO7321C 使用。

此參考設計使用 AMC1304M05。此參考設計也可搭配 (...)

支援產品和硬體
參考設計

TIDA-01088 — 具有隔離分流感測器的多相電源品質量測參考設計

TIDA-01088 參考設計在多相電能量測系統中實作電源品質參數量測。計算總諧波失真 (THD)、基波讀數，以及有功和無功電能和功率等標準計量參數。還可計算相位對相位角度，有助於防止系統安裝不正確。此設計採用隔離式分流電流感測器來維持諧波分析的準確度，並免受磁性篡改攻擊。
支援產品和硬體
參考設計

TIDM-3PH-ENERGY5-ESD — 具有強化 ESD 防護的 0.5 級三相能源量測系統參考設計

TIDM-3PH-ENERGY5-ESD 實作了具有強化型靜電放電 (ESD) 保護的 ANSI/IEC 0.5 級三相電能測量系統。此設計也具備透過 ZigBee™ 連線的通訊功能。能源量測系統單晶片 (SoC) 用於執行所有計量功能，並將有功功率結果傳送至 CC2530EM 附加電路板。您可以使用配套的家用顯示器參考設計 (TIDM-LOWEND-IHD) 遠端顯示結果。

此參考設計使用 MSP430F67641A ，也可搭配 MSP430F67641 使用。

支援產品和硬體
參考設計

TIDM-THREEPHASEMETER-F67641 — 0.5 級三相智慧型電錶參考設計

此設計採用 MSP430F67641 多相量測晶片系統，實作完整的智慧電表設計。此設計符合 ANSI/IEC Class 0.5 準確度的所有要求，且隨附的韌體可計算所有能源測量參數。F67641 SoC 搭載 128KB 晶片快閃記憶體及 320 區段 LCD 控制器，可作為單晶片解決方案，因應低成本多相電表設計挑戰。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
LQFP (PN) 80 Ultra Librarian
LQFP (PZ) 100 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片