MSPM0C1106-Q1
- AEC-Q100 Grade 1 qualified for automotive applications
- Core
- Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 32MHz
- Operating characteristics
- Extended temperature: –40°C up to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 64KB of flash memory
- 8KB of SRAM
- High-performance analog peripherals
- 12-bit 1.6 Msps analog-to-digital converter (ADC), up to 27 external channels
- Configurable 1.4V or 2.5V internal shared voltage reference (VREF)
- Comparator (COMP) with 8-bit reference DAC
- Integrated temperature sensor
- Optimized low-power modes
- RUN: 91µA/MHz (CoreMark)
- STANDBY 2µA and SRAM and registers fully retained
- SHUTDOWN: 68nA with I/O wake-up
- Intelligent digital peripherals
- 3-channel DMA controller
- 7-channel event fabric signaling system
- Five timers supporting up to 18 PWM outputs, all operational down to STANDBY mode
-
One 16-bit advanced timer with deadband and the timer frequency up to 64Mhz
-
One 16-bit general purpose timer with 4 capture/compares
- Three 16-bit general-purpose timers with 2 capture/compares
-
- Window-watchdog timer (WWDT)
- Independent watchdog timer (IWDT)
- RTC with alarm and calendar mode
- BEEPER generating 1/2/4/8kHz square wave to drive an external beeper
- Communication interfaces
- Three UART modules, with one supporting LIN, IrDA, DALI, smart card, Manchester
- Two I2C modules supporting SMBus/PMBus and wakeup from STOP mode, supporting up to FM+ (1Mbps)
-
One SPI module supporting up to 16Mbps
- Clock system
- Internal 32MHz oscillator with -2.1% to 1.6% accuracy (SYSOSC)
- Internal 32kHz oscillator (LFOSC) with ±3% accuracy
- External 4MHz to 32MHz crystal oscillator (HFXT)
- External 32kHz crystal oscillator (LFXT)
- External Low Frequency (LF) and High Frequency (HF) digital clock inputs
- Digital clock output
- Data integrity and encryption
- Cyclic redundancy checker (CRC-16)
- Flexible I/O features
- Up to 45 total GPIOs
- Two 5V-tolerant open-drain IOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options(1)
- 48-pin LQFP (PT), VQFN (RGZ)
- 32-pin VQFN (RHB)
- 28-pin VSSOP (DGS28)
- 24-pin VQFN (RGE)
- 20-pin WQFN (RUK), VSSOP (DGS20)
- Family members (also see Device Comparison)
- MSPM0C1106-Q1: 64KB of flash, 8KB of RAM
- MSPM0C1105-Q1: 32KB of flash, 8KB of RAM
- Development kits and software (also see Tools and Software)
- LP-MSPM0C1106 LaunchPad™ development kit
- MSP Software Development Kit (SDK)
(1)QFN packages have wettable flanks.
MSPM0C1105/6 microcontrollers (MCUs) are part of MSP’s highly integrated, ultra-low-power 32-bit MSPM0 MCU family based on the Arm Cortex-M0+ 32-bit core platform, operating at up to 32MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V.
The MSPM0C1105/6 devices provide up to 64KB embedded flash program memory with 8KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2.1% to +1.6%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.6 Msps ADC with VDD as the voltage reference, a comparator with 8-bit reference DAC and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer with deadband and timer frequency up to 64MHz, four 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including three UART, one SPI, and two I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers to find the MCU that meets the project’s needs. The MSPM0 MCU platform combines the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to increase performance while reducing energy consumption.
MSPM0C1105/6 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad available for purchase. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 C-Series Microcontrollers Technical Reference Manual.
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-MSPM0C1106 — 適用於 32-MHz Arm® Cortex®-M0+ MCU 的 MSPM0C1106 LaunchPad™ 開發套件
LP-MSPM0C1104-OOBE — Out-of-box experience GUI for LP-MSPM0C1104
支援產品和硬體
CCSTUDIO-STARTHUB — Example application browser
支援產品和硬體
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
支援產品和硬體
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)
支援產品和硬體
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.
支援產品和硬體
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
支援產品和硬體
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| LQFP (PT) | 48 | Ultra Librarian |
| VQFN (RGZ) | 48 | Ultra Librarian |
| VSSOP (DGS) | 32 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。