程式碼範例或展示
CC1120
- High-Performance, Single-Chip Transceiver
- Adjacent Channel Selectivity:
64 dB at 12.5-kHz Offset - Blocking Performance: 91 dB at 10 MHz
- Excellent Receiver Sensitivity:
- –123 dBm at 1.2 kbps
- –110 dBm at 50 kbps
- –127 dBm Using Built-in Coding Gain
- Very Low Phase Noise:
–111 dBc/Hz at 10-kHz Offset
- Adjacent Channel Selectivity:
- Suitable for Systems Targeting ETSI Category 1
Compliance in 169-MHz and 433-MHz Bands - High Spectral Efficiency (9.6 kbps in 12.5-kHz
Channel in Compliance With FCC Narrowbanding
Mandate) - Separate 128-Byte RX and TX FIFOs
- Support for Seamless Integration With the CC1190
Device for Increased Range Giving up to 3-dB
Improvement in Sensitivity and up to +27-dBm
Output Power - Power Supply
- Wide Supply Voltage Range (2.0 V to 3.6 V)
- Low Current Consumption:
- RX: 2 mA in RX Sniff Mode
- RX: 17 mA Peak Current in Low-Power
Mode - RX: 22 mA Peak Current in
High-Performance Mode - TX: 45 mA at +14 dBm
- Power Down: 0.12 µA
(0.5 µA With eWOR Timer Running)
- Programmable Output Power up to +16 dBm With
0.4-dB Step Size - Automatic Output Power Ramping
- Configurable Data Rates: 0 to 200 kbps
- Supported Modulation Formats: 2-FSK,
2-GFSK, 4-FSK, 4-GFSK, MSK, OOK - WaveMatch: Advanced Digital Signal Processing
for Improved Sync Detect Performance - RoHS-Compliant 5-mm × 5-mm No-Lead QFN
32-Pin Package (RHB) - Regulations – Suitable for Systems Targeting
Compliance With- Europe: ETSI EN 300 220, ETSI EN 54-25
- US: FCC CFR47 Part 15, FCC CFR47 Part 90,
24, and 101 - Japan: ARIB RCR STD-T30,
ARIB STD-T67, ARIB STD-T108
- Peripherals and Support Functions
- Enhanced Wake-On-Radio (eWOR)
Functionality for Automatic Low-Power Receive
Polling - Includes Functions for Antenna Diversity Support
- Support for Retransmissions
- Support for Automatic Acknowledge of Received
Packets - TCXO Support and Control, Also in Power
Modes - Automatic Clear Channel Assessment (CCA) for
Listen-Before-Talk (LBT) Systems - Built-in Coding Gain Support for Increased
Range and Robustness - Digital RSSI Measurement
- Temperature Sensor
- Enhanced Wake-On-Radio (eWOR)
The CC1120 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for Industrial, Scientific, and Medical (ISM) applications and Short Range Device (SRD) frequency bands at 164 to 192 MHz, 274 to 320 MHz, 410 to 480 MHz, and 820 to 960 MHz.
The CC1120 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters of the CC1120 device can be controlled through an SPI interface. In a typical system, the CC1120 device is used with a microcontroller and only a few external passive components.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 36 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
BOOSTXL-CC1120-90 — 適用於 902 MHz 至 928 MHz 應用的 BoosterPack
CC1120-CC1190 BoosterPack™ 模組專為搭配 MSP-EXP430F5529 及 MSP-EXP430G2553 LauchPad™ 開發套件使用而設計，並可透過 SmartRF Studio 應用軟體做為獨立模組使用。 此模組配備整合式 PCB 追蹤天線，可於美國 902~928MHz 和歐洲 869~870MHz ISM 頻帶運作。
開發板
SMARTRFTRXEBK — SmartRF 收發器評估板
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- (...)
使用指南: PDF
開發板
RDCR-3P-RADIO-MOD — Radiocrafts 嵌入式無線電模組
Radiocrafts’ standard RF modules provide compact, easy-to-use, low cost, low power and high-performance RF solutions for a large number of wireless applications using license-free ISM bands (169 MHz – 2.4 GHz). Using modules, OEM manufacturers without RF design knowledge can easily add (...)
子卡
CC1120EMK-169 — CC1120 評估模組套件 169MHz
The CC1120 Evaluation Module Kit for 169MHz can be used in conjunction with the CC1120 Development Kit to evaluate the performance of the Perfomance Line RF-IC at this particular frequency. The CC1120DK is required for operation and needs to be ordered separately.
This is not available in the (...)
子卡
CC1120EMK-420-470 — CC1120 評估模組套件 420-470MHz
The CC1120 Evaluation Module Kit for 420-470 MHz can be used in conjunction with the CC1120 Development Kit to evaluate the performance of the Perfomance Line RF-IC at this particular frequency. The CC1120DK is required for operation and needs to be ordered separately.
This CC1120 Evaluation Module (...)
子卡
CC1120EMK-868-915 — CC1120 評估模組套件 868-915MHz
The CC1120 Evaluation Module Kit for 868-915 MHz can be used in conjunction with the CC1120 Development Kit to evaluate the operation of the Perfomance Line RF-IC at these particular frequency bands. The CC1120DK is required for operation and needs to be ordered separately.
偵錯探測器
CC-DEBUGGER — 適用於射頻系統單晶片的偵錯器和程式設計工具
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
使用指南: PDF
介面轉接器
BOOST-CCEMADAPTER — EM 變壓器 BoosterPack
The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the wide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the (...)
應用軟體及架構
WMBUS — 無線 M-Bus 協定軟體
無線 M-Bus 標準 (EN13757-4:2014-2) 指定了水表、瓦斯表，以及電表和資料收集裝置間的 RF 通訊連結。此技術在歐洲廣受採用，適合智慧量測或進階計量基礎設施 (AMI) 應用。無線 M-Bus 最初的設計用途是在 868 MHz 頻帶中運作，此頻帶可在 RF 範圍與天線尺寸間提供良好取捨，並提供適合建築物內家庭區域網路範圍的鏈路預算。後來在 wM-Bus 規格中新增了歐洲的另外兩個 ISM 頻帶，即 169MHz 和 433MHz，並推出鏈路預算明顯較高的窄頻解決方案，因此可實現範圍較長的解決方案，例如人口密集城市中的都會區網路。
TI 提供哪些項目來協助設計人員？
(...)
支援軟體
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
支援產品和硬體
支援軟體
RF-RANGE-ESTIMATOR — RF Range Estimator
This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
支援產品和硬體
支援軟體
SWRC219 — TrxEB RF PER Test Software
支援產品和硬體
計算工具
PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
支援產品和硬體
計算工具
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支援產品和硬體
設計工具
3P-WIRELESS-MODULES — 第三方無線模組搜尋工具
第三方無線模組搜尋工具協助開發人員識別符合其終端設備規格的產品，並採購可投入生產的無線模組。搜尋工具中包含的第三方模組供應商是獨立的第三方公司，擁有使用 TI 無線連接產品設計與製造無線模組的專業知識。
設計工具
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 裝置的硬體設計審查
開始使用 SimpleLink ™ Sub-1GHz 硬體設計審審查程序：
- 步驟 1：申請審查之前，請務必檢閱技術文件與相關產品頁的設計與開發資源（請參閱下方的 CC1xxx 產品頁連結）。
- 步驟 2：下載並填寫硬體設計審查申請表。
- 步驟 3：請將填好的硬體設計審查申請表及所需文件以電子郵件傳送至：connectivity-sub1ghz-hw-review@list.ti.com
SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。有關用於申請審核的簡單三步驟流程，以及相關技術文件和資源的連結，可在此處找到。
一般設計問題應張貼在我們的 (...)
參考設計
TIDC-FCC-COMPLIANT-LRM-WITH-CC1120 — 採用 CC1120 高效能射頻收發器且符合 FCC 15.247 規範的長距離模式參考設計
此參考設計提供一個軟體範例，可實作適用於 CC112x 與 CC1200 系列裝置的跳頻驅動程式。此驅動程式旨在讓使用者開發符合 FCC Part 15.247 跳頻系統規範的 IoT 無線應用，並可實現長距離傳輸。
電路圖: PDF
參考設計
TIDA-00676 — 適用於電池供電類儀錶 (30dBm wM-Bus/169 MHz) 的電源解決方案參考設計
此電源管理解決方案可透過各種電池類型提供 900mA @3.6V，適用於智慧流量測量應用 (家用瓦斯表和水表)。TIDA-00676 包含 ETSI Cat.適用於 wM-Bus @ 169 MHz 且支援 1 個接收器的 RF 子系統，傳輸功率高達 +30 dBm，符合義大利和法國 169MHz RF 連結的所有技術要求。電源管理和 RF 子系統可同樣有效運用於具 wM-Bus@ 169 MHz 鏈路的資料收集器和其他終端節點 (E 電表或屋內顯示器)。
參考設計
CC1120EM-169-RD — CC1120EM 169 MHz 參考設計
This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the169 MHz frequency band.
參考設計
CC1120EM-868-915-RD — CC1120EM 868/915 MHz 參考設計
This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.
電路圖: PDF
參考設計
TIDC-CC1120-LRM-420-470MHZ — 具有 CC1120 (420 至 470 MHz) 的 Sub-1GHz 無線長距離參考設計
Narrowband is an industry standard way to get long range RF communication with higher immunity to interference versus wide band solutions. Use this reference design to test out the longest range solution from TI for your Internet of Things (IoT) applications. The tool for 420 to 470 (...)
參考設計
TIDC-CC1120-LRM-868-915MHZ — 具有 CC1120 (868 至 915 MHz) 的 Sub-1GHz 無線長距離參考設計
Narrowband is an industry standard way to get long range RF communication with higher immunity to interference versus wide band solutions. Use this reference design to test out the longest range solution from TI for your Internet of Things (IoT) applications. The tool for 868 to 915 MHz uses (...)
參考設計
TIDC-MULTIBAND-WMBUS — 具有區段 LCD 的多頻段 (169、433 和 868MHz) wM-Bus RF 子系統參考設計
TIDC-MULTIBAND-WMBUS 單一 PCB 涵蓋所有三個 wM-Bus 頻帶，只需變更少許元件值即可。此裝置的功耗非常低，且採用 ETSI Cat。適用於不含 SAW 濾波器和 TCXO 之 wM-Bus 169MHz 及 433 系統，且支援 1 個接收器的 RF 子系統。超低功耗的 MSP430 含持續開啟 LCD 區段支援，非常適合分表測量應用，如暖氣費計費器。
參考設計
TIDC-WMBUS-169MHZ — ETSI 類別適用於智慧型瓦斯表和水表，支援單個接收器的 wM-Bus 169 MHz 射頻子系統
此參考設計的功耗非常低，ETSI Cat。支援 1 個接收器的 RF 子系統，適用於支援 wM-Bus 的智慧型瓦斯表和水表 (169 MHz)。其針對所有 wM-Bus N 模式，提供領先市場的阻斷、選擇性和 RX 靈敏度編號，符合 EN13757-4:2013 及其各自變體的要求，這些模式分別由義大利和法國進行定義。這款不含 SAW 濾波器與 TCXO 的成本最佳化設計採用 RF 相容 DC/DC，可減少平均功耗同時維持最高 RF 性能。
參考設計
TIDM-LPBP-EMADAPTER — 評估模組 (EM) 轉接器
This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific (...)
電路圖: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。