首頁 無線連線 長距離 Sub-1 GHz 產品 Sub-1 GHz 收發器
首頁
無線連線
長距離 Sub-1 GHz 產品
Sub-1 GHz 收發器

CC1125

現行

適用窄頻系統的超高效能 Sub-1 GHz 無線收發器

立即訂購
產品規格表

CC1125

現行
立即訂購

產品詳細資料

Protocols 6LoWPAN, IEEE 802.15.4, Proprietary, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 136.7-160, 164-192, 205-240, 273.3-320, 410-480, 820-960 Type Transceiver TX power (max) (dBm) 16 Sensitivity (best) (dBm) -129 RX current (lowest) (mA) 17 Data rate (max) (Mbps) 0.2 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols 6LoWPAN, IEEE 802.15.4, Proprietary, Wireless M-Bus Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 136.7-160, 164-192, 205-240, 273.3-320, 410-480, 820-960 Type Transceiver TX power (max) (dBm) 16 Sensitivity (best) (dBm) -129 RX current (lowest) (mA) 17 Data rate (max) (Mbps) 0.2 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)
  • High-Performance, Single-Chip Transceiver
    • Adjacent Channel Selectivity: 67 dB at
      6.25-kHz Offset
    • Blocking Performance: 104 dB at 10 MHz
    • Excellent Receiver Sensitivity
      • –129 dBm at 300 bps
      • –123 dBm at 1.2 kbps
      • –110 dBm at 50 kbps
    • Very Low Phase Noise: –115 dBc/Hz at
      10-kHz Offset
  • Suitable for Systems Targeting ETSI
    Category 1
  • Separate 128-Byte RX and TX FIFOs
  • Support for Seamless Integration With the CC1190 Device for Increased Range Giving up to 3-dB Improvement in Sensitivity and up to +27-dBm Output Power
  • High Spectral Efficiency (9.6 kbps in 12.5-kHz Channel in Compliance With FCC Narrowbanding Mandate)
  • Power Supply
    • Wide Supply Voltage Range (2.0 V to 3.6 V)
    • Low Current Consumption:
      • RX: 2 mA in RX Sniff Mode
      • RX: 17 mA Peak Current in Low-Power Mode
      • RX: 26 mA Peak Current in High-Performance Mode
      • TX: 47 mA at +14 dBm
    • Power Down: 0.12 μA (0.5 μA With Enhanced Wake-On-Radio (eWOR) Timer Running)
  • Programmable Output Power up to +16 dBm With 0.4-dB Step Size
  • Automatic Output Power Ramping
  • Configurable Data Rates: 0 to 200 kbps
  • Supported Modulation Formats: 2-FSK,
    2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance
  • RoHS-Compliant 5-mm x 5-mm No-Lead QFN
    32-Pin Package (RHB)
  • Regulations – Suitable for Systems Targeting Compliance With
    • Europe: ETSI EN 300 220 Category 1, ETSI EN 54-25, ETSI EN 300 113, and EN 301 166
    • US: FCC CFR47 Part 15, 24, 90, 101
    • Japan: ARIB RCR STD-T30, T-67, T-108
  • Peripherals and Support Functions
    • eWOR Functionality for Automatic Low-Power Receive Polling
    • Includes Functions for Antenna Diversity Support
    • Support for Retransmissions
    • Support for Auto-Acknowledge of Received Packets
    • TCXO Support and Control, also in Power Modes
    • Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems
    • Built-in Coding Gain Support for Increased Range and Robustness
    • Digital RSSI Measurement
    • Temperature Sensor
  • High-Performance, Single-Chip Transceiver
    • Adjacent Channel Selectivity: 67 dB at
      6.25-kHz Offset
    • Blocking Performance: 104 dB at 10 MHz
    • Excellent Receiver Sensitivity
      • –129 dBm at 300 bps
      • –123 dBm at 1.2 kbps
      • –110 dBm at 50 kbps
    • Very Low Phase Noise: –115 dBc/Hz at
      10-kHz Offset
  • Suitable for Systems Targeting ETSI
    Category 1
  • Separate 128-Byte RX and TX FIFOs
  • Support for Seamless Integration With the CC1190 Device for Increased Range Giving up to 3-dB Improvement in Sensitivity and up to +27-dBm Output Power
  • High Spectral Efficiency (9.6 kbps in 12.5-kHz Channel in Compliance With FCC Narrowbanding Mandate)
  • Power Supply
    • Wide Supply Voltage Range (2.0 V to 3.6 V)
    • Low Current Consumption:
      • RX: 2 mA in RX Sniff Mode
      • RX: 17 mA Peak Current in Low-Power Mode
      • RX: 26 mA Peak Current in High-Performance Mode
      • TX: 47 mA at +14 dBm
    • Power Down: 0.12 μA (0.5 μA With Enhanced Wake-On-Radio (eWOR) Timer Running)
  • Programmable Output Power up to +16 dBm With 0.4-dB Step Size
  • Automatic Output Power Ramping
  • Configurable Data Rates: 0 to 200 kbps
  • Supported Modulation Formats: 2-FSK,
    2-GFSK, 4-FSK, 4-GFSK, MSK, OOK
  • WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance
  • RoHS-Compliant 5-mm x 5-mm No-Lead QFN
    32-Pin Package (RHB)
  • Regulations – Suitable for Systems Targeting Compliance With
    • Europe: ETSI EN 300 220 Category 1, ETSI EN 54-25, ETSI EN 300 113, and EN 301 166
    • US: FCC CFR47 Part 15, 24, 90, 101
    • Japan: ARIB RCR STD-T30, T-67, T-108
  • Peripherals and Support Functions
    • eWOR Functionality for Automatic Low-Power Receive Polling
    • Includes Functions for Antenna Diversity Support
    • Support for Retransmissions
    • Support for Auto-Acknowledge of Received Packets
    • TCXO Support and Control, also in Power Modes
    • Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems
    • Built-in Coding Gain Support for Increased Range and Robustness
    • Digital RSSI Measurement
    • Temperature Sensor

The CC1125 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 164–192 MHz, 274–320 MHz, 410–480 MHz, and 820–960 MHz.

The CC1125 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1125 device can be controlled through an SPI interface. In a typical system, the CC1125 device will be used with a microcontroller and only a few external passive components.

The CC1125 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 164–192 MHz, 274–320 MHz, 410–480 MHz, and 820–960 MHz.

The CC1125 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1125 device can be controlled through an SPI interface. In a typical system, the CC1125 device will be used with a microcontroller and only a few external passive components.
filter 尋找其它 Sub-1 GHz 收發器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
CC1120 現行 適用窄頻系統的高效能 Sub-1 GHz 無線收發器 CC1120 does not have the same RX filter bandwidth.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 30
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 CC1125 Ultra-High Performance RF Narrowband Transceiver datasheet (Rev. E) PDF | HTML 2014/9/29
* 勘誤表 CC112x, CC1175 Silicon Errata (Rev. D) 2015/4/24
應用說明 DN035 -- Antenna Quick Guide (Rev. B) 2022/2/9
應用說明 Debugging Communication Range (Rev. A) PDF | HTML 2019/5/23
應用說明 DN403 -- CC112x/CC120x On-Chip Temperature Sensor (Rev. D) 2018/10/24
應用說明 CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) PDF | HTML 2017/10/2
應用說明 Achieving Optimum Radio Range (Rev. A) PDF | HTML 2017/9/5
使用指南 CC112x TI-SIGFOX SDK Demo Getting Started User’s Guide 2016/5/27
應用說明 CC1125 Boosterpack for 868/915MHz – BOOSTXL-CC1125 2016/5/9
技術文章 Long-range Sub-1 GHz connectivity in the real world PDF | HTML 2015/12/4
白皮書 Diversifying the IoT with Sub-1 GHz technology 2015/11/4
應用說明 CC112x-CC1190 Boost Software Examples PDF | HTML 2015/10/19
應用說明 CC1120-CC1190 BoosterPack 2015/10/5
應用說明 Asynchronous channel hopping system for FCC 15.247 compliance 2015/7/7
技術文章 UNB (ultra-narrow band) long range communication for a smarter City PDF | HTML 2015/4/24
應用說明 TI LPRF EASYMODE 2014/12/12
應用說明 CC112X/CC120X On-Chip Battery Monitor 2014/12/3
應用說明 Antenna Diversity 2014/10/23
應用說明 CC112x/CC120x RX Sniff mode with Smart Preamble 2013/10/23
應用說明 CC112x/CC120x RX Sniff Mode (Rev. A) 2013/10/9
使用指南 CC112x/CC1175 Low-Power High Performance Sub-1 GHz RF Transceivers User’s Guide (Rev. E) 2013/9/26
應用說明 AN112 -- Using CC1190 Front End With CC112x/CC120x Under EN 300 220 (Rev. C) 2013/6/21
應用說明 AN110 – Using CC1190 Front End with CC112x/CC120x under FCC 15.247 (Rev. B) 2013/6/13
應用說明 AN115 -- CC112x/CC1175/CC120x Operation in 274-320 MHz Frequency Band (Rev. A) 2013/6/13
應用說明 AN122 – CC1125 Operating in 25 kHz Channels at 869 MHz ETSI Category 1 2013/3/21
應用說明 AN121 – Wireless M-Bus Implementation with CC112x/CC120x High Performance Transc 2013/2/20
應用說明 DN510 -- CC112X RSSI and CS Response Time 2012/12/5
應用說明 DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz 2012/11/27
應用說明 DN040 -- Reduced Battery Current Using CC112x, CC1175_and CC1200 with TPS62730 2012/10/2
應用說明 DN039 -- IPC for 868/915 MHz operation with the CC112x, CC117x and CC12xx 2012/8/20

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BOOSTXL-CC1125 — 適用於 868/915 MHz 應用的 CC1125 BoosterPack

CC1125 BoosterPack™ 模組專為搭配 MSP-EXP430F5529 及 MSP-EXP430G2553 LauchPad 開發套件使用而設計，並可透過 SmartRF Studio 應用軟體做為獨立模組使用。  此模組配備整合式 PCB 追蹤天線，可於歐洲 869~870MHz 和美國 902~928MHz ISM 頻帶運作。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

SMARTRFTRXEBK — SmartRF 收發器評估板

SmartRF 收發器評估板 (TrxEB) 與德州儀器的低功耗 RF 收發器搭配使用，以進行評估、性能測試和軟體開發。

支援下列收發器評估模組：

  • CC1101EM*
  • CC11xLEM*
  • CC112xEM*
  • CC1175EM*
  • CC1200EM*
  • CC2500EM
  • CC2520EM

(*) 所有頻率變體和 CC1190 的組合也受支援

評估模組可以在 TI Store 以 EMK（評估模組套件）形式單獨購買。

您可以利用 SmartRF TrxEB 做什麼？

  • 在 MSP430F5438A MCU 上開發您的無線電通訊協定。請參閱相關收發器網頁上的程式碼範例。
  • 使用 SmartRF Studio 評估收發器的性能。
  • 將 (...)
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

RDCR-3P-RADIO-MOD — Radiocrafts 嵌入式無線電模組

Radiocrafts’ standard RF modules provide compact, easy-to-use, low cost, low power and high-performance RF solutions for a large number of wireless applications using license-free ISM bands (169 MHz – 2.4 GHz). Using modules, OEM manufacturers without RF design knowledge can easily add (...)
從：Radiocrafts AS
支援產品和硬體
開發套件

CC1125DK — CC1125 開發套件

The CC1125 development kit provides a complete hardware performance testing and software development platform for TI's Sub-1 GHz Performance Line devices and CC1125 specifically. The development kit comes with a pre-programmed packet error rate test.

RF range and robustness can be tested with (...)

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

CC-DEBUGGER — 適用於射頻系統單晶片的偵錯器和程式設計工具

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
介面轉接器

BOOST-CCEMADAPTER — EM 變壓器 BoosterPack

The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the wide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the (...)
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
程式碼範例或展示

SWRC253 — CC112x Software Examples

支援產品和硬體
支援軟體

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

支援產品和硬體
支援軟體

RF-RANGE-ESTIMATOR — RF Range Estimator

This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
支援產品和硬體
支援軟體

SWRC219 — TrxEB RF PER Test Software

支援產品和硬體
計算工具

PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

支援產品和硬體
計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置：

 

資源

支援產品和硬體
設計工具

3P-WIRELESS-MODULES — 第三方無線模組搜尋工具

第三方無線模組搜尋工具協助開發人員識別符合其終端設備規格的產品，並採購可投入生產的無線模組。搜尋工具中包含的第三方模組供應商是獨立的第三方公司，擁有使用 TI 無線連接產品設計與製造無線模組的專業知識。

支援產品和硬體
設計工具

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 裝置的硬體設計審查

開始使用 SimpleLink ™ Sub-1GHz 硬體設計審審查程序：

  • 步驟 1：申請審查之前，請務必檢閱技術文件與相關產品頁的設計與開發資源（請參閱下方的 CC1xxx 產品頁連結）。
  • 步驟 2：下載並填寫硬體設計審查申請表。
  • 步驟 3：請將填好的硬體設計審查申請表及所需文件以電子郵件傳送至：connectivity-sub1ghz-hw-review@list.ti.com

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。有關用於申請審核的簡單三步驟流程，以及相關技術文件和資源的連結，可在此處找到。

一般設計問題應張貼在我們的 (...)

支援產品和硬體
參考設計

CC1125EM-868-915-RD — CC1125EM 868/915 MHz 參考設計

This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.

支援產品和硬體
參考設計

CC1125EM-868-RD — ETSI Cat 1 射頻配置參考設計

This reference design for the CC1125 shows how to successfully do the RF layout and filtering to meet the ETSI Category 1 requirements in the 868 MHz frequency band.

支援產品和硬體
參考設計

TIDC-CC1120-LRM-420-470MHZ — 具有 CC1120 (420 至 470 MHz) 的 Sub-1GHz 無線長距離參考設計

窄頻是實現遠距離 RF 通訊的行業標準方法，相對於寬頻解決方案，它具有更高的抗干擾能力。  使用此參考設計測試 TI 為您的物聯網 (IoT) 應用提供的最遠距離解決方案。  420 至 470MHz 的工具採用 CC1120DK，其中評估模組上的晶體被 TCXO 取代，並配備了專為窄頻遠距離通訊最佳化的 SW 解決方案。

支援產品和硬體
參考設計

TIDC-CC1120-LRM-868-915MHZ — 具有 CC1120 (868 至 915 MHz) 的 Sub-1GHz 無線長距離參考設計

窄頻是實現遠距離 RF 通訊的行業標準方法，相對於寬頻解決方案，它具有更高的抗干擾能力。使用此參考設計測試 TI 為您的物聯網 (IoT) 應用提供的最遠距離解決方案。868 至 915MHz 的工具採用 CC1120DK，其中評估模組上的晶體被 TCXO 取代，並配備了專為窄頻遠距離通訊最佳化的 SW 解決方案。

支援產品和硬體
參考設計

TIDC-DSSS868WMBUS-DC — 適用於 wM-Bus T-/C-模式和 DSSS 編碼數據封包 @ 868.95MHz 的電池供電數據收集器參考設計

TIDC-130 可讓資料收集器具備最佳韌體，以 868.95 MHz 頻率的頻繁傳輸 (T-) 和小型 (C-) 模式，接收無線 M-Bus (wM-Bus) 封包。為了擴大範圍，也支援自訂的直接序列展頻 (DSSS) 編碼封包接收。此參考設計可針對 169-MHz 和 433-MHz 頻帶的 wM-Bus 和 DSSS 資料收集器和行動讀取器進行調整。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片