現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
CC2340R2 現行 具有 256kB 快閃記憶體的 SimpleLink™ 32 位元 Arm® Cortex®-M0+ 2.4GHz 無線 MCU This product is a newer device with improved functionality.
CC2340R5 現行 具有 512kB 快閃記憶體的 SimpleLink™ 32 位元 Arm® Cortex®-M0+ 2.4GHz 無線 MCU This product is a newer device with improved functionality.

產品詳細資料

Frequency range 2400-2483.5 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -50 to 150 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
Frequency range 2400-2483.5 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -50 to 150 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
VQFNP (RSP) 36 36 mm² (6 mm × 6 mm)
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 31
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 Low-Power SoC (System-on-Chip) with MCU, memory, 2.4 GHz RF Transceiver, and USB datasheet (Rev. G) 2013/3/7
* 勘誤表 CC2510Fx, CC2511Fx Silicon Errata (Rev. D) 2015/8/14
應用說明 DN507 -- FEC Decoding 2019/3/21
應用說明 CRC Implementation (Rev. E) PDF | HTML 2018/9/27
應用說明 Using AES Encryption in CC111xFx and CC251xFx (Rev. C) 2015/3/13
應用說明 DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A) 2012/3/21
應用說明 AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A) 2011/9/8
應用說明 AN099 - Wireless Microphone with USB Interface 2011/6/1
應用說明 DN034 -- YAGI 2.4 GHz PCB Antenna 2010/10/14
應用說明 AN058 -- Antenna Selection Guide (Rev. B) 2010/10/6
應用說明 DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 2010/8/26
應用說明 DN505 -- RSSI interpretation and timing (Rev. D) 2010/6/16
應用說明 DN509 -- Data Whitening and Random TX Mode 2010/4/12
應用說明 DN107 -- DMA and Radio Configuration (Rev. A) 2009/12/17
應用說明 DN117 -- SimpliciTI-compatible UART Driver 2009/9/22
應用說明 AN080 -- LED Lighting with Remote Control using CC2510 and CC1110 2009/9/16
應用說明 DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B) 2009/8/11
應用說明 DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A) 2009/8/11
應用說明 DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices 2009/8/3
使用指南 CC1111/CC2511 USB HW User's Guide (Rev. B) 2009/7/31
應用說明 DN115 -- Using PWM for Dimmer Function in LED Lighting 2009/6/16
應用說明 DN111 - Current Consumption for a Polling Receiver (Rev. A) 2009/3/24
應用說明 DN300 -- SmartRF04EB Troubleshooting (Rev. B) 2009/3/24
應用說明 AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D) 2008/4/4
應用說明 DN021 - CC2500 and CC2510 Sensitivity versus Frequency Offset and Crystal Accura 2008/3/10
應用說明 AN048 -- 2.4GHz Chip Antenna (Rev. B) 2008/3/4
應用說明 DN101 -- Using the ADC to Measure Supply Voltage (Rev. A) 2007/10/22
應用說明 DN102 -- SoC Temperature Sensor (Rev. A) 2007/10/22
應用說明 DN504 -- FEC Implementation (Rev. A) 2007/10/22
應用說明 DN004 Folded Dipole Antenna for CCC25xx 2006/12/5
更多文件說明 CC2511 RoHS Confirmation 2006/10/27

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BOOSTXL-CC1120-90 — 適用於 902 MHz 至 928 MHz 應用的 BoosterPack

CC1120-CC1190 BoosterPack™ 模組專為搭配 MSP-EXP430F5529 及 MSP-EXP430G2553 LauchPad™ 開發套件使用而設計,並可透過 SmartRF Studio 應用軟體做為獨立模組使用。  此模組配備整合式 PCB 追蹤天線,可於美國 902~928MHz 和歐洲 869~870MHz ISM 頻帶運作。

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

BOOSTXL-CC1125 — 適用於 868/915 MHz 應用的 CC1125 BoosterPack

CC1125 BoosterPack™ 模組專為搭配 MSP-EXP430F5529 及 MSP-EXP430G2553 LauchPad 開發套件使用而設計,並可透過 SmartRF Studio 應用軟體做為獨立模組使用。  此模組配備整合式 PCB 追蹤天線,可於歐洲 869~870MHz 和美國 902~928MHz ISM 頻帶運作。

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

CC-DEBUGGER — 適用於射頻系統單晶片的偵錯器和程式設計工具

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
IDE、配置、編譯器或偵錯程式

SWRC216 — CCUSB2 IAR workspace

支援產品和硬體
IDE、配置、編譯器或偵錯程式

SWRC217 — CC1110_AIC3104_16kHz16bits_96 IAR workspaces

支援產品和硬體
驅動程式或資料庫

SIMPLICITI — 符合 SimpliciTI 的協定堆疊

SimpliciTI is a simple low-power RF network protocol aimed at small RF networks. SimpliciTI was designed for easy implementation and deployment out-of-the-box on several TI RF platforms such as the MSP430 family of low-power MCUs and the CC1XXX/CC25XX/CC430 transceivers and SoCs.

Small RF networks (...)
支援產品和硬體
韌體

SWRC088 — CC USB Firmware Library and Examples

支援產品和硬體
支援軟體

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

支援產品和硬體
支援軟體

SWRC062 — CC2511 USB-Dongle Reference Design 1.1

支援產品和硬體
支援軟體

SWRC143 — CC2511 Reference Design

支援產品和硬體
計算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 應用程式,功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中,能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生,以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置:

 

資源

支援產品和硬體
設計工具

SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 裝置的硬體設計審核

SimpleLink 硬體設計審核流程提供一對一接觸的方式,並由主題內容專家協助審查您的設計,提供您寶貴的意見。一個簡單的三步驟流程用於請求審查,以及相關技術文件和資源的連結,可在此處找到。

入門指南

一般設計問題應張貼在我們的 E2E 討論區中,然後才能要求 2.4 GHz 硬體設計審查。

請確實備妥下列必要文件,隨硬體設計審查申請表一起傳送:

  • 確認產品頁上提供的所有硬體文件均已經過審查,例如產品規格表、設計指南、使用指南和其他硬體資源
  • 電路圖的可攜式文件格式 (PDF) 版本可供檢閱
  • 物料清單 (BOM) 可供檢閱
  • 堆疊詳細資料可供檢閱
  • 電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFNP (RSP) 36 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片