CC115L
- KEY FEATURES
- Programmable Output Power up to +12 dBm for all Supported Frequencies
- Programmable Data Rate from 0.6 to 600 kbps
- Frequency Bands: 300 - 348 MHz, 387 - 464 MHz, and 779 - 928 MHz
- 2-FSK, 4-FSK, GFSK, MSK, and OOK Supported
- DIGITAL FEATURES
- Flexible Support for Packet Oriented Systems
- On-chip Support for Sync Word Insertion, Flexible Packet Length, and Automatic CRC Calculation
- LOW-POWER FEATURES
- 200 nA Sleep Mode Current Consumption
- Fast Startup Time; 240 μs From Sleep to TX Mode
- 64-byte TX FIFO
- Few External Components; Fully Integrated Frequency Synthesizer
- Green Package: RoHS Compliant and No Antimony or Bromine
- Small Size (QLP 4x4 mm Package, 20 pins)
- Suited for Systems Targeting Compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US)
- Support for Asynchronous and Synchronous Serial Transmit Mode for Backwards Compatibility with Existing Radio Communication Protocols
The CC115L is a cost optimized sub-1 GHz RF transmitter. The circuit is based on the popular CC1101 RF transceiver, and RF performance characteristics are identical. The CC115L value line transmitter together with the CC113L value line receiver enables a low cost RF link.
The RF transmitter is integrated with a configurable baseband modulator. The modem supports various modulation formats and has a configurable data rates from 0.6 to 600 kbps.
CC115L provides extensive hardware support for packet handling, data buffering and burst transmissions.
The main operating parameters and the 64- byte transmit FIFO of CC115L can be controlled via an SPI interface. In a typical system, the CC115L will be used together with a microcontroller and a few additional passive components.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | CC115L Value Line Transmitter datasheet (Rev. B) | PDF | HTML | 2014年 5月 8日 |
| * | Errata | CC115L Errata Notes | 2011年 5月 26日 | |
| Selection guide | 無線連線技術選擇指南 (Rev. B) | 2022年 3月 7日 | ||
| Application note | Debugging Communication Range (Rev. A) | PDF | HTML | 2019年 5月 23日 | |
| White paper | Migrating your proprietary solution to the SimpleLink™ WMCU | 2018年 11月 7日 | ||
| Application note | CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) | 2017年 10月 2日 | ||
| Application note | TI LPRF EASYMODE | 2014年 12月 12日 | ||
| Application note | DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz | 2012年 11月 27日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
SMARTRFTRXEBK — SmartRF 收發器評估板
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- (...)
SWRC219 — TrxEB RF PER Test Software
支援產品和硬體
產品
Sub-1 GHz 收發器
硬體開發
開發套件
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
支援產品和硬體
產品
MSP430 microcontrollers
低耗電 2.4GHz 產品
Sub-1 GHz 無線 MCU
Sub-1 GHz 收發器
其它無線產品
汽車無線連線產品
硬體開發
開發套件
開發板
介面轉接器
子卡
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 裝置的硬體設計審查
- 步驟 1:申請審查之前,請務必檢閱技術文件與相關產品頁的設計與開發資源(請參閱下方的 CC1xxx 產品頁連結)。
- 步驟 2:下載並填寫硬體設計審查申請表。
- 步驟 3:請將填好的硬體設計審查申請表及所需文件以電子郵件傳送至:connectivity-sub1ghz-hw-review@list.ti.com
SimpleLink 硬體設計審核流程提供一對一接觸的方式,並由主題內容專家協助審查您的設計,提供您寶貴的意見。有關用於申請審核的簡單三步驟流程,以及相關技術文件和資源的連結,可在此處找到。
一般設計問題應張貼在我們的 (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGP) | 20 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。