TMS470MF06607
- High-Performance Automotive Grade Microcontroller with Safety Features
- Full Automotive Temperature Range
- ECC on Flash and SRAM
- CPU and Memory BIST (Built-In Self Test)
- ARM Cortex™-M3 32-Bit RISC CPU
- Efficient 1.2 DMIPS/MHz
- Optimized Thumb2 Instruction Set
- Memory Protection Unit (MPU)
- Open Architecture With Third-Party Support
- Built-In Debug Module
- Operating Features
- Up to 80MHz System Clock
- Single 3.3V Supply Voltage
- Integrated Memory
- 640KB Total Program Flash with ECC
- Support for Flash EEPROM Emulation
- 64K-Byte Static RAM (SRAM) with ECC
- Key Peripherals
- High-End Timer, MibADC, CAN, MibSPI
- Common TMS470M/570 Platform Architecture
- Consistent Memory Map across the family
- Real-Time Interrupt Timer (RTI)
- Digital Watchdog
- Vectored Interrupt Module (VIM)
- Cyclic Redundancy Checker (CRC)
- Frequency-Modulated Zero-Pin Phase-Locked Loop (FMZPLL)-Based Clock Module
- Oscillator and PLL clock monitor
- Up to 77 Peripheral IO pins
- 8 Dedicated GIO - w/ External Interrupts
- Programmable External Clock (ECLK)
- Communication Interfaces
- Two CAN ControllersOne with 32 mailboxes, one with 16Parity on mailbox RAM
- Two Multi-buffered Serial Peripheral Interface (MibSPI)12 total chip selects64 buffers with parity on eachOne with 4 bit parallel mode
- One Standard SPI Interface4 chip selectsEnable Pin
- Two UART (SCI) interfacesH/W Support for Local Interconnect Network (LIN 2.0)
- High-End Timer (HET)
- Up to 26 Programmable I/O Channels
- 64 Word Instruction RAM with parity
- 10-Bit Multi-Buffered ADCs (MibADC)
- Up to 16 ADC Input channels
- 64 Result FIFO Buffer with parity
- 1.55uS total conversion time
- Calibration and Self Test features
- On-Chip Scan-Base Emulation Logic
- IEEE Standard 1149.1 (JTAG) Test-Access Port and Boundary Scan
- Packages supported
- 144-Pin Plastic Quad Flatpack (PGE Suffix)
- 100-Pin Plastic Quad Flatpack (PZ Suffix)
- Green/Lead-Free
- Development Tools Available
- Development Boards
- Code Composer Studio™ Integrated Development Environment (IDE)
- HET Assembler and Simulator
- nowFlash™ Flash Programming Tool
- Community Reesources
All other trademarks are the property of their respective owners
The TMS470MF06607 device is a member of the Texas Instruments TMS470M family of Automotive Grade 16/32-bit reduced instruction set computer (RISC) microcontrollers. The TMS470M microcontrollers offer high performance utilizing the high efficiency ARM Cortex™-M3 16/32-bit RISC central processing unit (CPU), resulting in a high instruction throughput while maintaining greater code efficiency.
High-end embedded control applications demand more performance from their controllers while maintaining low costs. The TMS470M microcontroller architecture offers solutions to these performance and cost demands while maintaining low power consumption.
The TMS470MF06607 device contains the following:
- 16/32-Bit RISC CPU Core
- 640K-Byte Total Flash with SECDED ECC
- 512K-Byte Program Flash
- 128K- Byte Flash for additional program space or EEPROM Emulation
- 64K-Byte Static RAM (SRAM) with SECDED ECC
- Real-Time Interrupt Timer (RTI)
- Vectored Interrupt Module (VIM)
- Hardware built-in self-test (BIST) checkers for SRAM (MBIST) and CPU (LBIST)
- 64-bit Cyclic Redundancy Checker (CRC)
- Frequency-Modulated Zero-Pin Phase-Locked Loop (FMZPLL)-Based Clock Module With Prescaler
- Two Multi-buffered Serial Peripheral Interfaces (MibSPI)
- Two UARTs (SCI) with Local Interconnect Network Interfaces (LIN)
- Two CAN Controller (DCAN)
- High-End Timer (HET)
- External Clock Prescale (ECP) Module
- One 16-Channel 10-Bit Multi-Buffered ADC (MibADC)
- Error Signaling Module (ESM)
- Four Dedicated General-Purpose I/O (GIO) Pins and 47 (2 of them are muxed with JTAG pins) Additional Peripheral I/Os (100-Pin Package)
The TMS470M memory includes general-purpose SRAM supporting single-cycle read/write accesses in byte, half-word, and word modes. The SRAM on the TMS470M devices can be protected by means of ECC. This feature utilizes a single error correction and double error detection circuit (SECDED circuit) to detect and optionally correct single bit errors as well as detect all dual bit and some multi-bit errors. This is achieved by maintaining an 8-bit ECC checksum/code for each 64-bit double-word of memory space in a separate ECC RAM memory space.
技術文件
設計與開發
電源供應解決方案
為 TMS470MF06607 尋找可用的電源供應解決方案。TI 提供適用於 TI 與非 TI 之系統單晶片 (SoC)、處理器、微控制器、感測器或現場可編程邏輯閘陣列 (FPGA) 的電源供應解決方案。
TMDSEMU200-U — XDS200 USB 偵錯探測器
XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。
XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)
TMDSEMU560V2STM-U — XDS560™ 軟體 v2 系統追蹤 USB 偵錯探測器
XDS560v2 是 XDS560™ 系列偵錯探測器中性能最高的，且同時支援傳統 JTAG 標準 (IEEE1149.1) 與 cJTAG (IEEE1149.7)。 請注意，其不支援序列線偵錯 (SWD)。
所有 XDS 偵錯探測器均在所有配備嵌入式追蹤緩衝器 (ETB) 的 ARM 與 DSP 處理器中支援核心與系統追蹤。 對於針腳上的追蹤，則需要 XDS560v2 PRO TRACE。
XDS560v2 透過 MIPI HSPT 60 針腳接頭 (具有用於 TI 14 針腳、TI 20 針腳和 ARM 20 針腳的多轉接器) 連接到目標電路板，並透過 USB2.0 高速 (...)
TMDSEMU560V2STM-UE — XDS560v2 System Trace USB 與乙太網路偵錯探測器
The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).
All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
HALCOGEN — HAL 程式碼產生器工具 - TMS570 (v4.07.01)
HALCoGen allows users to generate hardware abstraction layer device drivers for Hercules™ microcontrollers. HALCoGen provides a graphical user interface that allows the user to configure peripherals, interrupts, clocks, and other Hercules microcontroller parameters. Once the Hercules device (...)
HET_IDE — 高階計時器 (HET)
The High-End Timer (HET) is a programmable timer co-processor available on TI’s high-performance Hercules Microcontrollers. The HET enables sophisticated timing functions for real-time control applications. Programming the HET provides an alternate approach to the use of costly FPGAs or ASICs which (...)
TMS470MFEE — TMS470M Flash EEPROM Emulation Driver
F035FLASHAPI — TMS470/570 Platform F035 Flash API (v1.09)
These functions must be used when creating Flash bootloaders or other programming utilities for the TMS470/570 (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。
UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。
請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。
HERCULES_SAFETY_MCU_DEMOS — Hercules Software Kit (v4.0.0)
NHET-ASSEMBLER — TMS570 NHET Assembler Software (v2.0.1)
TI's Enhanced High-End Timer (NHET) module provides sophisticated timing functions for real-time control applications.
The NHET Assembler translates programs written in the NHET assembly language into multiple output formats for use in code-generation tools such as TI's Code Composer Studio.
NOWECC — TMS570 nowECC v2.22.00
FMZPLL_CALCULATOR — FMzPLL 配置工具
- OSCIN speed
- multiplier setting
- divider settings
- frequency modulation settings
- PLL/OSC fail options
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| LQFP (PZ) | 100 | Ultra Librarian |