TMS320F280023-Q1

활성

100MHz, FPU, TMU, 64KB 플래시를 지원하는 차량용 C2000™ 32비트 MCU

제품 상세 정보

CPU 1 C28 Frequency (MHz) 100 Flash memory (kByte) 64 RAM (kByte) 24 ADC type 2 12-bit SAR Total processing (MIPS) 100 Features FPU32 UART 3 CAN (#) 1 Sigma-delta filter 0 PWM (Ch) 14 TI functional safety category Functional Safety Quality-Managed Number of ADC channels 14, 16 Direct memory access (Ch) 6 SPI 2 QEP 2 USB No Operating temperature range (°C) -40 to 125 Rating Automotive Communication interface CAN, FSI, I2C, LIN, PMBUS, SCI, SPI Operating system FreeRTOS Hardware accelerators Floating point unit, Trigonometric math accelerator Nonvolatile memory (kByte) 64 Number of GPIOs 43 Number of I2Cs 2 Security Secure storage Edge AI enabled No
CPU 1 C28 Frequency (MHz) 100 Flash memory (kByte) 64 RAM (kByte) 24 ADC type 2 12-bit SAR Total processing (MIPS) 100 Features FPU32 UART 3 CAN (#) 1 Sigma-delta filter 0 PWM (Ch) 14 TI functional safety category Functional Safety Quality-Managed Number of ADC channels 14, 16 Direct memory access (Ch) 6 SPI 2 QEP 2 USB No Operating temperature range (°C) -40 to 125 Rating Automotive Communication interface CAN, FSI, I2C, LIN, PMBUS, SCI, SPI Operating system FreeRTOS Hardware accelerators Floating point unit, Trigonometric math accelerator Nonvolatile memory (kByte) 64 Number of GPIOs 43 Number of I2Cs 2 Security Secure storage Edge AI enabled No
LQFP (PM) 64 144 mm² 12 x 12 LQFP (PN) 80 196 mm² 14 x 14 LQFP (PT) 48 81 mm² 9 x 9
  • TMS320C28x 32-bit DSP core at 100MHz
    • IEEE 754 Floating-Point Unit (FPU)
      • Support for Fast Integer Division (FINTDIV)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • CRC Engine and Instructions (VCRC)
    • Ten hardware breakpoints (with ERAD)
  • On-chip memory
    • 128KB (64KW) of flash (ECC-protected)
    • 24KB (12KW) of RAM (ECC or parity-protected)
    • Dual-zone security
  • Clock and system control
    • Two internal zero-pin 10MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • Single 3.3V supply
    • Internal VREG generation
    • Brownout reset (BOR) circuit
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 43 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins
    • 16 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Embedded Real-time Analysis and Diagnostic (ERAD)
    • Unique Identification (UID) number
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
    • Two Inter-integrated Circuit (I2C) interfaces
    • One Controller Area Network (CAN) bus port
    • Two Serial Peripheral Interface (SPI) ports
    • One UART-compatible Serial Communication Interface (SCI)
    • Two UART-compatible Local Interconnect Network (LIN) interfaces
    • Fast Serial Interface (FSI) with one transmitter and one receiver (up to 200Mbps)
  • Analog system
    • Two 3.45MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 16 external channels
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
  • Enhanced control peripherals
    • 14 ePWM channels with eight channels that have high-resolution capability (150ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Three Enhanced Capture (eCAP) modules
      • High-resolution Capture (HRCAP) available on one of the three eCAP modules
    • Two Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
  • Configurable Logic Block (CLB)
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Host Interface Controller (HIC)
    • Access to internal memory from an external host
  • Background CRC (BGCRC)
    • One cycle CRC computation on 32 bits of data
  • Diagnostic features
    • Memory Power On Self Test (MPOST)
    • Hardware Built-in Self Test (HWBIST)
  • Package options:
    • 80-pin Low-profile Quad Flatpack (LQFP) [PN suffix]
    • 64-pin LQFP [PM suffix]
    • 48-pin LQFP [PT suffix]
  • Temperature options:
    • S: –40°C to 125°C junction
    • Q: –40°C to 125°C free-air (AEC Q100 qualification for automotive applications)
  • Functional Safety Quality-Managed
    • Documentation available to aid ISO 26262, IEC 61508, and IEC 60730 system design
  • TMS320C28x 32-bit DSP core at 100MHz
    • IEEE 754 Floating-Point Unit (FPU)
      • Support for Fast Integer Division (FINTDIV)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • CRC Engine and Instructions (VCRC)
    • Ten hardware breakpoints (with ERAD)
  • On-chip memory
    • 128KB (64KW) of flash (ECC-protected)
    • 24KB (12KW) of RAM (ECC or parity-protected)
    • Dual-zone security
  • Clock and system control
    • Two internal zero-pin 10MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • Single 3.3V supply
    • Internal VREG generation
    • Brownout reset (BOR) circuit
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 43 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins
    • 16 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
    • Embedded Real-time Analysis and Diagnostic (ERAD)
    • Unique Identification (UID) number
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
    • Two Inter-integrated Circuit (I2C) interfaces
    • One Controller Area Network (CAN) bus port
    • Two Serial Peripheral Interface (SPI) ports
    • One UART-compatible Serial Communication Interface (SCI)
    • Two UART-compatible Local Interconnect Network (LIN) interfaces
    • Fast Serial Interface (FSI) with one transmitter and one receiver (up to 200Mbps)
  • Analog system
    • Two 3.45MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 16 external channels
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
  • Enhanced control peripherals
    • 14 ePWM channels with eight channels that have high-resolution capability (150ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Three Enhanced Capture (eCAP) modules
      • High-resolution Capture (HRCAP) available on one of the three eCAP modules
    • Two Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
  • Configurable Logic Block (CLB)
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Host Interface Controller (HIC)
    • Access to internal memory from an external host
  • Background CRC (BGCRC)
    • One cycle CRC computation on 32 bits of data
  • Diagnostic features
    • Memory Power On Self Test (MPOST)
    • Hardware Built-in Self Test (HWBIST)
  • Package options:
    • 80-pin Low-profile Quad Flatpack (LQFP) [PN suffix]
    • 64-pin LQFP [PM suffix]
    • 48-pin LQFP [PT suffix]
  • Temperature options:
    • S: –40°C to 125°C junction
    • Q: –40°C to 125°C free-air (AEC Q100 qualification for automotive applications)
  • Functional Safety Quality-Managed
    • Documentation available to aid ISO 26262, IEC 61508, and IEC 60730 system design

The TMS320F28002x (F28002x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 100MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Trigonometric Math Unit (TMU) and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

High-performance analog blocks are integrated on the F28002x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Fourteen PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, and CAN) and offers multiple pin-muxing options for optimal signal placement. The Fast Serial Interface (FSI) enables up to 200Mbps of robust communications across an isolation boundary.

New to the C2000 platform is the Host Interface Controller (HIC), a high-throughput interface that allows an external host to access the resources of the TMS320F28002x directly.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD280025C evaluation board and download C2000Ware.

The TMS320F28002x (F28002x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 100MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Trigonometric Math Unit (TMU) and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

High-performance analog blocks are integrated on the F28002x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Fourteen PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, and CAN) and offers multiple pin-muxing options for optimal signal placement. The Fast Serial Interface (FSI) enables up to 200Mbps of robust communications across an isolation boundary.

New to the C2000 platform is the Host Interface Controller (HIC), a high-throughput interface that allows an external host to access the resources of the TMS320F28002x directly.

Want to learn more about features that make C2000 MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD280025C evaluation board and download C2000Ware.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TMS320F2800154-Q1 활성 CAN-FD, 록스텝 ASIL B를 지원하는 오토모티브 C2000™ 32비트 MCU 100MHz 128KB 플래시 Similar performance, larger flash memory, CAN-FD support, ASIL B functional safety compliant, without HRPWM and Configurable Logic Block
TMS320F2800155-Q1 활성 HRPWM, CAN-FD, 록스텝 ASIL B를 지원하는 오토모티브 C2000™ 32비트 MCU 120MHz 128KB 플래시 Higher performance, larger flash memory, CAN-FD support, ASIL B functional safety compliant, without Configurable Logic Block

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
106개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TMS320F28002x Real-Time Microcontrollers datasheet (Rev. C) PDF | HTML 2024/04/04
* Errata TMS320F28002x Real-Time MCUs Silicon Errata (Rev. C) PDF | HTML 2024/02/08
* User guide TMS320F28002x Real-Time Microcontrollers Technical Reference Manual (Rev. C) PDF | HTML 2024/03/27
Application note Serial Flash Programming of C2000 Microcontrollers (Rev. I) PDF | HTML 2025/08/14
Application note MCU Control Center Tool Developer's Guide PDF | HTML 2025/08/04
Application note MCU Signal Sight Tool Developer's Guide PDF | HTML 2025/08/01
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. U) PDF | HTML 2025/07/11
Product overview Safety Package for Automotive and Industrial Real-Time Microcontrollers (Rev. E) PDF | HTML 2025/06/23
Application note C2000-IDE Assist Tool Migration Feature Guide PDF | HTML 2025/04/23
Functional safety information VDE Safety Certification Document for F280013x, F280015x, F28002x, F28004x, F2838x, F28003x, F28P65x, F28P55x 2025/03/19
Application brief How to Debug Interrupt Abnormalities PDF | HTML 2025/02/25
Application note C2000 IDE Assist Tool Features Guide (Rev. A) PDF | HTML 2025/01/29
Application note C2000™ MCU JTAG Connectivity Debug (Rev. C) PDF | HTML 2024/08/12
Application note ADC Oversampling (Rev. A) PDF | HTML 2024/08/06
Application note Development Tool Versions for C2000™ Support (Rev. A) PDF | HTML 2024/06/26
Product overview Implementing IEC 60730 / UL 1998 Compliance for C2000 Real-Time Microcontrollers (Rev. A) PDF | HTML 2024/06/25
Certificate Certificate of Compliance UL-CA-2340465-0 2024/05/23
Application note Power Supply and Monitoring Solution for C2000 MCU Automotive Applications PDF | HTML 2024/04/17
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/03/25
Application note VREFHI Input Driver Design for C2000 MCUs PDF | HTML 2024/01/18
Product overview C2000™ Safety Mechanisms (Rev. B) 2023/11/09
Application note Optimized Control Schemes for Totem Pole PFC With Digital Controller PDF | HTML 2023/09/22
Application note CRC Engines in C2000 Devices (Rev. A) PDF | HTML 2023/05/01
Application note Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 2023/04/19
Application note ADC Input Circuit Evaluation for C2000 MCUs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 2023/03/24
Application note ADC Input Circuit Evaluation for C2000 Real-Time MCUs (using PSPICE-FOR-TI) PDF | HTML 2023/03/24
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using PSPICE-FOR-TI) (Rev. A) PDF | HTML 2023/03/24
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 2023/03/24
Application note Methods for Mitigating ADC Memory Cross-Talk (Rev. A) PDF | HTML 2023/03/24
Application note C2000 ePWM Developer’s Guide (Rev. A) PDF | HTML 2023/02/24
Application note C2000 Motor Control SysConfig Tool PDF | HTML 2023/02/08
User guide Migration Between TMS320F28002x, TMS320F280015x and TMS320F280013x Guide PDF | HTML 2023/02/01
Application note C2000 SysConfig Linker Command Tool PDF | HTML 2023/01/26
Application note Using the Fast Serial Interface (FSI) With Multiple Devices in an Application (Rev. E) PDF | HTML 2023/01/25
Application note Hardware Design Guide for F2800x C2000™ Real-Time MCU Series (Rev. A) PDF | HTML 2022/12/21
User guide C2000Ware motor control SDK getting started guide (Rev. A) PDF | HTML 2022/10/27
User guide Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) (Rev. C) PDF | HTML 2022/06/29
Application note Intelligent LLC SR Control Using C2000 and UCD7138 (Rev. A) PDF | HTML 2022/06/27
Application note Interfacing EEPROM Using PMBus in I2C Mode PDF | HTML 2022/05/06
Application note Implement three-phase interleaved LLC on C2000 Type-4 PWM PDF | HTML 2022/03/30
Application note C2000 Memory Power-On Self-Test (M-POST) (Rev. A) PDF | HTML 2022/03/03
Application note The Essential Guide for Developing With C2000 Real-Time Microcontrollers (Rev. F) PDF | HTML 2022/03/03
Application note Real-Time Benchmarks Showcasing C2000™ Control MCU's Optimized Signal Chain (Rev. A) PDF | HTML 2021/12/15
Application note Enhancing the Computational Performance of the C2000™ Microcontroller Family (Rev. C) PDF | HTML 2021/12/14
Application note Achieve Delayed Protection for Three-Level Inverter With Type 4 EPWM PDF | HTML 2021/10/29
E-book Real-Time Control Reference Guide PDF | HTML 2021/10/29
Application note C2000 SysConfig PDF | HTML 2021/10/20
User guide Migration Between TMS320F28002x and TMS320F28003x PDF | HTML 2021/10/20
Application note Programming Examples for the DCAN Module (Rev. A) PDF | HTML 2021/05/20
Application note Leverage New Type ePWM Features for Multiple Phase Control PDF | HTML 2021/05/11
Application note C2000™ DCSM Security Tool (Rev. A) PDF | HTML 2021/05/10
Application note Light load THD and Eff Opt of Digital Cntrl PFC Converter Int Valley Switch Cntr (Rev. A) 2021/04/07
Functional safety information Safety Manual for TMS320F28002x User's Guide PDF | HTML 2021/04/06
White paper TI GaN FET와 C2000™ 실시간 MCU를 결합하여 전력 밀도가 높고 효율적인 전원 시스템 달성 2021/03/18
Application note CRM/ZVS PFC Implementation Based on C2000 Type-4 PWM Module PDF | HTML 2021/02/18
Application note Quick Response Control of PMSM Using Fast Current Loop (Rev. B) 2020/12/07
Application note Flexible PWMs Enable Multi-Axis Drives, Multi-Level Inverters (Rev. B) PDF | HTML 2020/10/29
More literature Texas Instruments C2000™ F28002x Real-Time Controller Series (Rev. B) 2020/10/02
Application note C2000™ Unique Device Number (Rev. B) PDF | HTML 2020/09/17
Application note Sensorless-FOC for PMSM With Single DC-Link Shunt PDF | HTML 2020/08/10
White paper Piccolo™ C2000™ MCUs enable the next generation of low-cost, dual-axis servo dri (Rev. A) 2020/07/13
White paper Taking charge of electric vehicles – both in the vehicle and on the grid (Rev. A) 2020/06/17
Application note How to Migrate Custom Logic From an FPGA/CPLD to C2000 Microcontrollers (Rev. A) 2020/06/15
User guide SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) 2020/06/01
User guide C2000Ware DigitalPower SDK Getting Started Guide (Rev. B) 2020/03/20
Application note Migration Between TMS320F28004x and TMS320F28002x (Rev. A) PDF | HTML 2020/03/05
White paper Distributed Power Control Architecture w/ C2000 MCUs Over Fast Serial Interface PDF | HTML 2020/02/14
Application note Design Guide for Enabling Peripheral Expansion Applications Using the HIC PDF | HTML 2020/01/28
Application note TMS320F2802x/TMS320F2803x to TMS320F28002x Migration Overview 2020/01/13
More literature C2000Ware Quickstart Guide (Rev. D) 2019/12/20
User guide controlSUITE to C2000Ware Transition Guide (Rev. C) 2019/12/20
Application note Configurable Error Generator for Controller Area Network PDF | HTML 2019/12/19
User guide TMS320C28x Extended Instruction Sets Technical Reference Manual (Rev. C) 2019/10/29
Application note How to Maximize GPIO Usage in C2000 Devices PDF | HTML 2019/10/08
Application note Leveraging High Resolution Capture (HRCAP) for Single Wire Data Transfer PDF | HTML 2019/08/28
Application note Dual-Axis Motor Control Using FCL and SFRA On a Single C2000™ MCU PDF | HTML 2019/08/07
E-book InstaSPIN™ solutions for designing three-phase motor control applications 2019/07/22
Functional safety information Optimized solutions for safe motion control applications 2019/06/28
User guide C2000™ Software Frequency Response Analyzer (SFRA) Library User’s Guide (Rev. A) PDF | HTML 2019/06/26
User guide Fast Current Loop Driverlib Library User’s Guide 2019/05/30
Application note C2000 Software Controlled Firmware Update Process PDF | HTML 2019/05/08
Application note Calculating Useful Lifetimes of Embedded Processors (Rev. B) PDF | HTML 2019/05/07
Functional safety information C2000™ MCU SafeTI™ control solutions: An introduction to ASIL decomposition 2019/04/10
User guide DesignDRIVE IDDK Hardware Reference Guide PDF | HTML 2019/04/10
User guide DesignDRIVE IDDK User Guide PDF | HTML 2019/04/10
Application note Embedded Real-Time Analysis and Response for Control Applications PDF | HTML 2019/03/29
User guide TMS320F28002x Flash API Version 1.57.00.00 2019/03/03
Application note Designing With The C2000 Configurable Logic Block 2019/02/05
Application note MSL Ratings and Reflow Profiles (Rev. A) 2018/12/13
Application note Fast Serial Interface (FSI) Skew Compensation 2018/11/08
White paper A faster current loop reduces the size of EV motors 2018/07/27
White paper Breakthrough technologies lead the solar power industry into the future 2018/07/27
White paper Exploring the evolution and optimization of wireless power transfer 2018/07/27
Functional safety information Functional Safety: A tunable FMEDA for C2000™ MCUs 2018/07/27
White paper Maximizing power for Level 3 EV charging stations 2018/06/12
Functional safety information Achieving Coexistence of Safety Functions for EV/HEV Using C2000 MCUs 2018/05/21
Application note Dual Motor Ctl Using FCL and Perf Analysis Using SFRA on TMS320F28379D LaunchPad (Rev. A) 2018/03/20
User guide Fast Current Loop (C28x) Library 2018/03/06
Application note Performance Analysis of Fast Current Loop (FCL) in Servo 2018/03/06
Application note Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. E) PDF | HTML 2017/12/19
Application note Calculator for CAN Bit Timing Parameters PDF | HTML 2016/03/22
User guide TMS320C28x DSP CPU and Instruction Set (Rev. F) 2015/04/10
Application note Calculating FIT for a Mission Profile 2015/03/24
Application note Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L) 2013/02/28
Application note TMS320C28x FPU Primer (Rev. A) 2009/07/20
Application note Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A) 2008/09/09

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TMDSCNCD280025C — C2000™ MCU controlCARD™용 TMS320F280025C 평가 모듈

TMDSCNCD280025C은 F28002x 디바이스의 TI C2000™ MCU 시리즈를 위한 저비용 평가 및 개발 보드입니다. HSEC180(180핀 고속 에지 커넥터)이 제공되며 controlCARD로 초기 평가 및 프로토타이핑에 이상적입니다. TMDSCNCD280025C 평가를 위해 180핀 도킹 스테이션 TMDSHSECDOCK가 필요하며 별도로 구매할 수 있습니다.

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
평가 보드

XDS110ISO-EVM — C2000 및 Sitara™ controlSOM용 XDS110 절연 플러그인 평가 모듈

XDS110 절연 플러그인 보드는 C2000 및 Sitara controlSOM을 위한 실시간 디버그 및 플래시 프로그래밍 평가 모듈입니다. 비절연 120핀 커넥터 또는 전기적으로 절연된 16핀 커넥터를 통해 C2000 및 Sitara controlSOM에 연결할 수 있습니다. 두 커넥터는 모두 JTAG/cJTAG/SWD 지원과 전이중 UART 포트를 갖추고 있습니다. 이 보드는 SPI(직렬 주변 기기 인터페이스), 4개의 절연 디지털-아날로그 컨버터(DAC) 채널, 최대 6개의 디지털 및 4개의 아날로그 비절연 채널 등 타깃 (...)
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
평가 보드

ALGO-3P-UISP1-TI — 텍사스 인스트루먼트 장치용 Algocraft μISP1 프로그래머

μISP는 호스트 PC(RS-232, USB, LAN 연결 기능이 내장되어 있음)에 연결되어 작동하거나 단독 모드로 작동할 수 있습니다.

독립 실행형 모드의 프로그래밍 싸이클은 단순히 START 버튼을 누르거나 일부 TTL 제어 라인을 통해 실행될 수 있습니다.

컴팩트한 크기와 다양한 기능을 갖추고 있어 생산 환경, 수동 및 자동 프로세스에 간편하게 통합할 수 있습니다.

발송: Algocraft
도터 카드

TMDSFSIADAPEVM — 고속 직렬 인터페이스(FSI) 어댑터 보드 평가 모듈(EVM)

더 빠르고, 더 저렴하고, 더 견고함: 새로운 직렬 통신 기술인 FSI(고속 직렬 인터페이스)를 통해 전체 절연에 걸쳐 200Mbps 처리량 달성

FSI는 신호 수가 적은 직렬 통신 주변 기기로, C2000 실시간 제어 마이크로컨트롤러(MCU)에서 사용할 수 있으며, 이 MCU는 최대 200Mbps의 다른 직렬 주변 기기에 비해 높은 처리량으로 저비용의 안정적인 통신을 제공합니다. 짧은 지연으로 장치 간에 시간이 중요한 데이터를 전달할 수 있는 FSI는 제어 시스템 내에서 처리, 감지 및 활성화를 분산하는 새로운 토폴로지와 방법을 (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
도터 카드

TMDSHSECDOCK — HSEC180 controlCARD 베이스보드 도킹 스테이션

TMDSHSECDOCK은 호환 가능한 HSEC180 기반 controlCARD의 주요 신호에 대한 헤더 핀 액세스를 제공하 베이스 보드입니다. 신속한 프로토타이핑을 위해 브레드보드를 사용할 수 있습니다. 보드 전원은 USB 케이블 또는 5V 배럴 공급 장치로 공급할 수 있습니다.

사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
디버그 프로브

TMDSEMU110-U — XDS110 JTAG 디버그 프로브

텍사스 인스트루먼트 XDS110은 TI 임베디드 프로세서를 위한 새로운 디버그 프로브(에뮬레이터)입니다. XDS110은 XDS100 제품군을 대체하면서 하나의 포드로 더 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을지원합니다. 또한 모든 XDS 디버그 프로브는 ETB(Embedded Trace Buffer)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어(Core) 및 시스템 트레이스(System Trace)를 지원합니다.  핀을 통한 코어 추적의 경우 XDS560v2 PRO TRACE가 필요합니다.

(...)
사용 설명서: PDF
Download English Version: PDF
TI.com에서 구매할 수 없음
디버그 프로브

TMDSEMU200-U — XDS200 USB 디버그 프로브

XDS200은 TI 임베디드 장치를 디버깅하는 데 사용되는 디버그 프로브(에뮬레이터)입니다. 대부분의 장치의 경우 더욱 저렴한 신형 XDS110(www.ti.com/tool/TMDSEMU110-U)을 사용하실 것을 권장합니다. XDS200은 단일 포드에서 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을 지원합니다. 모든 XDS 디버그 프로브는 ETB(임베디드 트레이스 버퍼)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어 및 시스템 트레이스를 지원합니다.

XDS200은 TI 20핀 커넥터(TI 14핀, (...)

TI.com에서 구매할 수 없음
디버그 프로브

TMDSEMU560V2STM-U — XDS560v2 시스템 추적 USB 디버그 프로브

XDS560v2는 디버그 프로브의 XDS560™ 제품군 중 최고의 성능을 가진 제품으로, 기존의 JTAG 표준(IEEE1149.1)과 cJTAG(IEEE1149.7)를 모두 지원합니다. SWD(직렬 와이어 디버그)는 지원하지 않습니다.

모든 XDS 디버그 프로브는 ETB(Embedded Trace Buffer)를 특징으로 하는 모든 ARM 및 DSP 프로세서에서 코어 및 시스템 추적을 지원합니다. 핀을 통한 추적의 경우 XDS560v2 PRO TRACE가 필요합니다.

XDS560v2는 MIPI HSPT 60핀 커넥터(TI 14핀, (...)

TI.com에서 구매할 수 없음
디버그 프로브

TMDSEMU560V2STM-UE — XDS560v2 시스템 추적 USB 및 이더넷 디버그 프로브

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

TI.com에서 구매할 수 없음
개발 키트

LAUNCHXL-F280025C — C2000™ 실시간 MCU용 F280025C LaunchPad™ 개발 키트

LAUNCHXL-F280025C는 TI C2000™ 실시간 마이크로컨트롤러 시리즈 F28002x 장치용 저비용 개발 보드입니다. 초기 평가 및 프로토타이핑에 적합하며, 귀사의 다음 애플리케이션 개발을 위한 표준화되고 사용이 간편한 플랫폼을 제공합니다. 이 확장 버전 LaunchPad™ 개발 키트는 개발을 위해 추가 핀을 제공하고 2개의 BoosterPack™ 플러그인 모듈 연결을 지원합니다. 방대한 TI MCU LaunchPad 에코시스템의 일부로, 광범위한 플러그인 모듈과 상호 호환됩니다.

사용 설명서: PDF
TI.com에서 구매할 수 없음
개발 키트

TMDXIDDK379D — 산업용 모터 제어용 C2000 DesignDRIVE 개발 키트

DesignDRIVE 개발 키트(IDDK) 하드웨어는 고전압 3상 모터를 구동하기 위한 최대 전력계를 갖춘 통합 서보 드라이브 설계를 제공하며 다양한 위치 피드백, 전류 센싱 및 제어 토폴로지의 평가를 용이하게 해줍니다.

델타-시그마 싱크 필터 8개, 16비트 또는 12비트 ADC 4개, 윈도우형 비교기 등 C2000™ MCU의 감지 주변 기기를 통해 DesignDRIVE 키트는 션트, 플럭스게이트/홀, 델타-시그마 전류 센싱을를 동시에 지원할 수 있습니다. 위치 피드백을 위해 이 키트는 EnDat, BiSS, T포맷, 증분형 (...)
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
하드웨어 프로그래밍 도구

C2000-GANG — C2000 갱 프로그래머

Elprotronics, Inc.의 - C2000 갱 프로그래머는 최대 8개의 동일한 C2000 장치를 동시에 프로그래밍할 수 있는 C2000 장치 프로그래머입니다. C2000 갱 프로그래머는 표준 RS-232 또는 USB 연결을 사용하여 호스트 PC에 연결하고 사용자가 프로세스를 완벽하게 사용자 지정할 수 있는 유연한 프로그래밍 옵션을 제공합니다.

C2000 갱 프로그래머에는 갱 스플리터라고 불리는 확장 보드가 제공되며, 이 보드는 C2000 갱 프로그래머와 여러 대상 장치 간의 상호 연결을 구현합니다. 확장 보드를 8개의 대상 (...)

사용 설명서: PDF
하드웨어 프로그래밍 도구

ALGO-3P-WRITENOW — Algocraft WriteNow! 프로그래머

WriteNow! 시스템 내 프로그래머 시리즈는 프로그래밍 산업에서 획기적인 발전입니다. 프로그래머는 다양한 제조업체의 수많은 장치(마이크로컨트롤러, 메모리, CPLD 및 기타 프로그래머블 장치)를 지원하며 간편한 ATE/장치 통합을 위한 컴팩트한 크기를 가지고 있습니다. 이는 단독으로 작동하거나 호스트 PC(RS-232, LAN 및 USB 연결 기능이 내장되어 있음)에 연결되어 있으며 사용이 간편한 소프트웨어 유틸리티가 제공됩니다.

발송: Algocraft
소프트웨어 개발 키트(SDK)

C2000WARE C2000Ware for C2000 Microcontrollers

C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.

  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

찾아보기 다운로드 옵션
소프트웨어 개발 키트(SDK)

C2000WARE-DIGITALPOWER-SDK DigitalPower SDK for C2000 Real-time Controllers

    • DigitalPower SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based digital power system development time targeted for various AC-DC, DC-DC and DC-AC power supply applications. The software includes (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

찾아보기 다운로드 옵션
소프트웨어 개발 키트(SDK)

C2000WARE-MOTORCONTROL-SDK MotorControl software development kit (SDK) for C2000™ MCUs

MotorControl SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 real-time controller based motor control system development time targeted for various three-phase motor control applications. The software (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

찾아보기 다운로드 옵션
시작하기

TI-DEVELOPER-ZONE Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

IDE, 구성, 컴파일러 또는 디버거

C2000-CGT C2000 code generation tools - compiler

The TI C28x code generation tools (C2000-CGT) facilitate the development of applications for TI C28x microcontroller platforms. The platforms include the Concerto (F28M3xx), Piccolo (280xx), Delfino floating-point (283xx), and C28x fixed-point (2823x/280x/281x) device families.

The TI C29x code (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

다운로드 옵션
IDE, 구성, 컴파일러 또는 디버거

C2000_CLA_SAFETI_CQKIT_RV C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • is free of charge for TI customers
  • does (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

다운로드 옵션
IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO Code Composer Studio integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

시작 다운로드 옵션
IDE, 구성, 컴파일러 또는 디버거

SYSCONFIG Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

시작 다운로드 옵션
온라인 교육

C28X-ACADEMY C28X-ACADEMY

The C28x Academy is a great resource for developers to learn about C28x-based C2000 real-time microcontrollers. The Academy delivers informational training modules as well as hands-on lab exercises that span a variety of topics.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

운영 체제(OS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 사전 인증 안전 RTOS

SAFERTOS®는 임베디드 프로세서를 위해 설계된 고유한 실시간 운영 체제입니다. TÜV SÜD의 IEC 61508 SIL3 및 ISO 26262 ASILD 표준에 따라 사전 인증을 받았습니다. SAFERTOS®는 WHIS 전문가 팀에서 안전을 위해 특별히 제작되었으며, 전 세계적으로 안전이 중요한 응용 분야에 사용됩니다. WHIS와 텍사스 인스트루먼트는 10년 넘게 협력해 왔습니다. 이 기간 동안, WHIS는 SAFERTOS®를 광범위한 TI 프로세서로 이식하여 널리 사용되는 모든 코어를 지원하며 요청 시 추가 아키텍처를 (...)
소프트웨어 프로그래밍 도구

UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

시작 다운로드 옵션
시뮬레이션 모델

F280025C, F280025, F280023C, F280023, and F280021 PT IBIS Model (Rev. A)

SPRM761A.ZIP (256 KB) - IBIS Model
시뮬레이션 모델

F280025C, F280025, F280023C, and F280023 PM BSDL Model (Rev. A)

SPRM757A.ZIP (2 KB) - BSDL Model
시뮬레이션 모델

F280025C, F280025, F280023C, and F280023 PM IBIS Model (Rev. A)

SPRM760A.ZIP (257 KB) - IBIS Model
시뮬레이션 모델

F280025C, F280025, F280023C, and F280023 PN BSDL Model (Rev. A)

SPRM756A.ZIP (2 KB) - BSDL Model
시뮬레이션 모델

F280025C, F280025, F280023C, and F280023 PN IBIS Model (Rev. A)

SPRM759A.ZIP (257 KB) - IBIS Model
설계 툴

C2000-3P-SEARCH — C2000 타사 검색 툴

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)
레퍼런스 디자인

TIDM-1001 — C2000™ MCU를 사용하는 2상 인터리브 LLC 공진 컨버터 레퍼런스 설계

공진 컨버터는 서버, 통신, 자동차, 산업 및 기타 전원 공급 장치 분야에서 자주 사용되는 대중적인 DC-DC 컨버터입니다. 성능이 뛰어나고(효율성, 전력 밀도 등), 다양한 산업 표준의 요구 사항이 개선되고, 전력 밀도 목표가 지속적으로 증가함에 따라 이러한 컨버터는 중간 전력 및 고전력 애플리케이션에 좋은 선택이 되었습니다.

이 설계는 디지털로 제어되는 500W 2상 인터리브 LLC 공진 컨버터를 구현합니다. 이 시스템은 단일 C2000™ 마이크로컨트롤러(MCU) TMS320F280025C로 제어되며, 이 MCU도 모든 작동 (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
LQFP (PM) 64 Ultra Librarian
LQFP (PN) 80 Ultra Librarian
LQFP (PT) 48 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상