CC2651R3SIPA
Wireless microcontroller
- Powerful 48-MHz Arm® Cortex®-M4 processor
- 352KB flash program memory
- 32KB of ultra-low leakage SRAM
- 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
- Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
- Supports over-the-air upgrade (OTA)
Low power consumption
- MCU consumption:
- 3.60 mA active mode, CoreMark
- 61 µA/MHz running CoreMark
- 0.8 µA standby mode, RTC, 32KB RAM
- 0.1 µA shutdown mode, wake-up on pin
- Radio Consumption:
- 6.8 mA RX
- 7.1 mA TX at 0 dBm
- 9.6 mA TX at +5 dBm
Wireless protocol support
- Zigbee®
- Bluetooth® 5.2 Low Energy
- SimpleLink™ TI 15.4-stack
- Proprietary systems
High performance radio
- -104 dBm for Bluetooth® Low Energy 125-kbps
- Output power up to +5 dBm with temperature compensation
Regulatory compliance
- Regulatory certification for
compliance with worldwide radio frequency:
- ETSI RED (Europe) / RER (UK)
- ISED (Canada)
- FCC (USA)
MCU peripherals
- Digital peripherals can be routed to any GPIO
- Four 32-bit or eight 16-bit general-purpose timers
- 12-bit ADC, 200 kSamples/s, 8 channels
- 8-bit DAC
- Two comparators
- Programmable current source
- UART, SSI, I 2C, I 2S
- Real-time clock (RTC)
- Integrated temperature and battery monitor
Security enablers
- AES 128-bit cryptographic accelerator
- True random number generator (TRNG)
- Additional cryptography drivers available in Software Development Kit (SDK)
Development tools and software
- LP-CC2651R3SIPA Development Kit
- SimpleLink™ CC13xx and CC26xx Software Development Kit (SDK)
- SmartRF™ Studio for simple radio configuration
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.8-V to 3.8-V single supply voltage
- T j: -40 to +105°C
Package
- 7-mm × 7-mm MOU (32 GPIOs)
- RoHS-compliant package
The SimpleLink™ CC2651R3SIPA device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Zigbee®, Bluetooth® 5.2 Low Energy, IEEE 802.15.4g, TI 15.4-Stack (2.4 GHz). The CC2651R3SIPA is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.
The CC2651R3SIPA is an ultra-compact 7-mm x 7-mm certified wireless module 2.4 GHz with integrated antenna, DCDC components, Balun, and high frequency crystal oscillator.
The CC2651R3SIPA has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. The CC2651R3SIPA supports +5 dBm TX at 9.6 mA in the 2.4-GHz band. CC2651R3SIPA has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.
The CC2651R3SIPA has a low sleep current of 0.9 µA with RTC and 32KB RAM retention.
TI has a product life cycle policy with a commitment to product longevity and continuity of supply.
The CC2651R3SIPA device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1 GHz MCUs, and host MCU. CC2651R3SIPA is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LP-CC2651R3SIPA — SimpleLink™ 다중 프로토콜 2.4GHz 무선 SIP 모듈용 CC2651R3SIPA LaunchPad™ 개발 키트
이 LaunchPad™ 개발 키트는 Bluetooth® 5 저에너지(LE) 및 ZigBee® 및 TI 15.4 애플리케이션을 포함한 IEEE 802.15.4 기반 프로토콜을 지원하는 통합 안테나 MCU가 있는 SimpleLink™ 다중 표준 CC2651R3SIPA 무선 시스템-인 패키지 모듈을 사용하여 개발 속도를 높이는 데 사용됩니다. CC13XX-CC26XX 소프트웨어 개발 키트(SDK)에서 소프트웨어 지원을 제공합니다.
ALGO-3P-UISP1-TI — 텍사스 인스트루먼트 장치용 Algocraft μISP1 프로그래머
μISP는 호스트 PC(RS-232, USB, LAN 연결 기능이 내장되어 있음)에 연결되어 작동하거나 단독 모드로 작동할 수 있습니다.
독립 실행형 모드의 프로그래밍 싸이클은 단순히 START 버튼을 누르거나 일부 TTL 제어 라인을 통해 실행될 수 있습니다.
컴팩트한 크기와 다양한 기능을 갖추고 있어 생산 환경, 수동 및 자동 프로세스에 간편하게 통합할 수 있습니다.
TMDSEMU110-U — XDS110 JTAG 디버그 프로브
텍사스 인스트루먼트 XDS110은 TI 임베디드 프로세서를 위한 새로운 디버그 프로브(에뮬레이터)입니다. XDS110은 XDS100 제품군을 대체하면서 하나의 포드로 더 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을지원합니다. 또한 모든 XDS 디버그 프로브는 ETB(Embedded Trace Buffer)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어(Core) 및 시스템 트레이스(System Trace)를 지원합니다. 핀을 통한 코어 추적의 경우 XDS560v2 PRO TRACE가 필요합니다.
(...)TMDSEMU200-U — XDS200 USB 디버그 프로브
XDS200은 TI 임베디드 장치를 디버깅하는 데 사용되는 디버그 프로브(에뮬레이터)입니다. 대부분의 장치의 경우 더욱 저렴한 신형 XDS110(www.ti.com/tool/TMDSEMU110-U)을 사용하실 것을 권장합니다. XDS200은 단일 포드에서 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을 지원합니다. 모든 XDS 디버그 프로브는 ETB(임베디드 트레이스 버퍼)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어 및 시스템 트레이스를 지원합니다.
XDS200은 TI 20핀 커넥터(TI 14핀, (...)
ALGO-3P-WRITENOW — Algocraft WriteNow! 프로그래머
WriteNow! 시스템 내 프로그래머 시리즈는 프로그래밍 산업에서 획기적인 발전입니다. 프로그래머는 다양한 제조업체의 수많은 장치(마이크로컨트롤러, 메모리, CPLD 및 기타 프로그래머블 장치)를 지원하며 간편한 ATE/장치 통합을 위한 컴팩트한 크기를 가지고 있습니다. 이는 단독으로 작동하거나 호스트 PC(RS-232, LAN 및 USB 연결 기능이 내장되어 있음)에 연결되어 있으며 사용이 간편한 소프트웨어 유틸리티가 제공됩니다.
SIMPLELINK-LOWPOWER-F2-SDK — SimpleLink™ Low Power F2 software development kit (SDK) for the CC13x1, CC13x2, CC13x4, CC26x1, CC26x2 and CC26x4 devices
SimpleLink™ 저전력 SDK는 CC13xx, CC23xx, CC26xx 및 CC27xx 제품군을 지원합니다. 이러한 SDK는 SimpleLink CC13xx, CC23xx, CC26xx 및 CC27xx 무선 MCU에서 Bluetooth® 저에너지, Mesh, Zigbee®, Matter, Thread, 802.15.4 기반, 독점 및 멀티프로토콜 솔루션을 지원하는 등 Sub-1GHz 및 2.4GHz 애플리케이션 개발을 위한 포괄적인 소프트웨어 패키지를 제공합니다.
TI-15-4-STACK-GATEWAY-LINUX-SDK — TI 15-4-Stack Gateway Linux Software Development Kit
The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)
ARM-CGT — Arm® 코드 생성 툴 – 컴파일러
The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.
The current tools ARM-CGT-CLANG are derived from the (...)
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SENSOR-CONTROLLER-STUDIO — 센서 컨트롤러 스튜디오
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
FLASH-PROGRAMMER — SmartRF 플래시 프로그래머
SmartRF 플래시 프로그래머 2는 디버그 및 직렬 인터페이스를 통해 텍사스 인스트루먼트 ARM 기반 저전력 RF 무선 MCU의 플래시 메모리를 프로그래밍하는 데 사용할 수 있습니다. 호환성은 지원되는 제품 목록을 확인하십시오. Uniflash는 모든 SimpleLink 제품을 프로그래밍하는 데 사용할 수도 있습니다.
SmartRF 플래시 프로그래머는 텍사스 인스트루먼트 8051 기반 저전력 RF 무선 MCU의 플래시 메모리를 프로그래밍하고 SmartRF05 평가 보드, SmartRF 트랜시버 평가 보드(TrxEB) 및 CC (...)
UNIFLASH — UniFlash 플래시 프로그래밍 도구
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
RF-RANGE-ESTIMATOR — RF Range Estimator
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices
Z-STACK-CALC — Z-Stack Power Calculator
CC26XX-REPORTS — CC26xx regulatory certifcation reports
3P-WIRELESS-MODULES — 타사 무선 모듈 검색 툴
타사 무선 모듈 검색 툴은 개발자가 완제품 사양을 충족하는 제품을 식별하고 생산 준비가 완료된 무선 모듈을 조달하는 데 유용합니다. 검색 툴에 포함되어 있는 타사 모듈 공급업체는 TI 무선 연결 제품을 사용하여 무선 모듈을 설계 및 제조하는 전문성을 갖춘 독립 회사입니다.
SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 귀중한 피드백을 제공할 수 있는 주제 전문가와 일대일로 연락할 수 있는 방법을 제공합니다. 간단한 3단계 검토 요청 절차와 관련 기술 문서 및 리소스 링크는 여기서 확인할 수 있습니다.
시작하기
일반 설계 질문은 2.4GHz 하드웨어 설계 검토를 요청하기 전에 E2E 포럼에 게시해야 합니다.
하드웨어 설계 검토 요청 양식과 함께 전송할 다음 필수 문서가 준비되어 있는지 확인하세요:
- 데이터 시트, 설계 가이드, 사용 설명서 및 기타 하드웨어 리소스와 같이 제품 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| QFM (MOU) | 50 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.