MSP432E411Y

활성

이더넷, CAN, TFT LCD, 1MB 플래시, 256KB RAM을 갖춘 SimpleLink™ 32비트 Arm Cortex-M4F MCU

제품 상세 정보

CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 Security Cryptographic acceleration, Secure communication, Secure debug SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 140 Number of I2Cs 10
CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 Security Cryptographic acceleration, Secure communication, Secure debug SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 140 Number of I2Cs 10
NFBGA (ZAD) 212 100 mm² (10 mm × 10 mm)
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Media Independent Interface (MII) and Reduced MII (RMII)
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
    • One 1-Wire Module With a Bidirectional Serial Communication Protocol Provides Both Power and Data Over a Single Wire
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB of EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 212-Ball NFBGA (ZAD)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Media Independent Interface (MII) and Reduced MII (RMII)
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
    • One 1-Wire Module With a Bidirectional Serial Communication Protocol Provides Both Power and Data Over a Single Wire
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB of EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 212-Ball NFBGA (ZAD)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C

The SimpleLink MSP432E411Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E411Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E411Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E411Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E411Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

The SimpleLink MSP432E411Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E411Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E411Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E411Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E411Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

다운로드 스크립트와 함께 비디오 보기 비디오
TI에서 제공하는 제한된 설계 지원

이 제품을 사용하는 기존 프로젝트에는 TI의 설계 지원이 제한되어 있습니다. 가능한 경우 이 페이지에서 관련 자료, 툴 및 소프트웨어를 확인할 수 있습니다. 이 제품을 사용하는 기존 설계에는 TI의 설계 지원이 제한되어 있습니다. TI E2E™ 지원 포럼에서 제한된 설계 지원을 요청하십시오.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
12개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 MSP432E411Y SimpleLink™ Ethernet Microcontroller datasheet PDF | HTML 2017. 10. 26
* 사용 설명서 MSP432E4 SimpleLink™ Microcontrollers Technical Reference Manual (Rev. A) PDF | HTML 2018. 10. 29
* 정오표 MSP432E4 SimpleLink™ Microcontrollers Silicon Errata (Rev. A) PDF | HTML 2025. 6. 27
사이버 보안 권고 Variable Time Tag Comparison on SimpleLink™ Devices PDF | HTML 2020. 6. 5
백서 Understanding Security Features for SimpleLink™ MSP432E4 Ethernet MCUs (Rev. A) 2019. 1. 31
애플리케이션 노트 Using SimpleLink™ MSP432E4 microcontrollers over the JTAG interface (Rev. A) 2019. 1. 11
Third party document uVision Lab for the TI MSP432E4 LaunchPad Board 2017. 12. 28
기술 문서 Merging wired and wireless connectivity to build an intelligent gateway to the clo PDF | HTML 2017. 11. 28
사용 설명서 MSP432E4 SimpleLink™ Microcontrollers Bootloader (BSL) User's Guide (Rev. A) 2017. 11. 16
애플리케이션 노트 System Design Guidelines for SimpleLink™ MSP432E4 Microcontrollers 2017. 10. 31
애플리케이션 노트 Using Feature Set of I2C Master on SimpleLink MSP432E4 Microcontrollers 2017. 10. 27
백서 Building a gateway from the sensors to the cloud 2017. 10. 26

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LAUNCHXL-CC2640R2 — SimpleLink™ Bluetooth® 저에너지 무선 MCU용 CC2640R2 LaunchPad™ 개발 키트

이 LaunchPad™는 CC2640R2F 또는 CC2640R2L 장치를 사용하는 BLE(Bluetooth® 저에너지) 연결로 개발 속도를 높입니다. 호환되는 SDK는 고속 모드를 지원하는 단일 모드 BLE 애플리케이션을 위한 완전한 검증을 거친 Bluetooth 5 프로토콜 스택과 장거리 모드 테스트를 위한 Bluetooth 5 코딩된 PHY(물리 계층)의 예를 제공합니다. Bluetooth 4.2 스택도 사용할 수 있습니다.

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
개발 키트

CC3120BOOST — SimpleLink™ Wi-Fi CC3120 무선 네트워크 프로세서 부스터팩(BoosterPack™) 플러그인 모듈

SimpleLink™ Wi-Fi® CC3120 무선 네트워크 프로세서는 사용자가 모든 MCU(마이크로컨트롤러)에 Wi-Fi를 추가할 수 있는 유연성을 제공합니다. CC3120 BoosterPack™ 플러그 인 모듈(CC3120BOOST)은 TI의 MCU LaunchPad 키트(MSP-EXP432P401R용으로 제공되는 소프트웨어 예제)에 쉽게 연결할 수 있는 보드로, 신속한 소프트웨어 개발을 가능하게 합니다. CC3120BOOST는 고급 에뮬레이션 BoosterPack(CC31xxEMUBOOST)에 연결하고 SimpleLink (...)

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
개발 키트

MSP-EXP432E401Y — 이더넷 SimpleLink™ MCU용 MSP432E401Y LaunchPad™ 개발 키트

SimpleLink™ 이더넷 MSP432E401Y 마이크로컨트롤러 LaunchPad™ 개발 키트는 SimpleLink™ Arm® Cortex®-M4F 기반 이더넷 MCU를 위한 직관적인 평가 플랫폼입니다. 이더넷 LaunchPad 개발 키트는 이더넷 MAC 및 PHY가 통합된 MSP432E401Y MCU와 USB-OTG, CAN, 쿼드 SPI(QSSI), I2C, SPI, UART 및 기타 직렬 프로토콜을 포함한 다양한 유선 통신 인터페이스를 보여줍니다. 120MHz Arm Cortex-M4F CPU, 1MB 플래시, 256KB (...)

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
디버그 프로브

MSP432-DEBUGGERS — MSP432용 디버거

MSP432 MCUs are designed to work with a variety of debuggers from Texas Instruments and third party vendors.

  • Texas Instruments:
    • XDS100v2:
      • The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for TI processors. The XDS100 family features the lowest (...)
지원되는 제품 및 하드웨어
소프트웨어 개발 키트(SDK)

SIMPLELINK-MSP432-SDK — SimpleLink MSP432P4 High-precision ADC MCU Software Development

지원되는 제품 및 하드웨어
소프트웨어 개발 키트(SDK)

SIMPLELINK-MSP432E4-SDK — SimpleLink MSP432E4 Ethernet MCU Software Development Kit

MSP432 SDK(소프트웨어 개발 키트)는 엔지니어가 텍사스 인스트루먼트의 MSP432™ 마이크로컨트롤러(MCU)를 사용하여 기능이 뛰어난 애플리케이션을 빠르게 개발할 수 있도록 하는 포괄적인 소프트웨어 패키지입니다. MSP432 SDK는 RTOS, 드라이버 및 미들웨어를 포함한 여러 호환 가능한 소프트웨어 구성 요소와 이러한 구성 요소를 함께 사용하는 방법을 보여줍니다. 또한 각 기능 영역과 지원되는 각 장치의 사용 방법을 보여주는 것과 자체 프로젝트의 시작 지점이 됩니다.

 

 
지원되는 제품 및 하드웨어
소프트웨어 개발 키트(SDK)

SIMPLELINK-WIFI-CC3120-SDK-PLUGIN — SIMPLELINK-SDK-WIFI-플러그인

중요 참고:

SimpleLink SDK는 정기적으로 업데이트됩니다. 최신 릴리스 업데이트를 받으려면 위의 알림을 클릭하세요.

CC3120 SDK에는 Wi-Fi 기능과 인터넷을 위한 드라이버, 여러 샘플 애플리케이션, CC3120 Internet-on-a-chip™ 솔루션을 사용하는 데 필요한 문서가 포함되어 있습니다. 이 SDK는 TI의 MSP432P401R LaunchPad와 함께 사용하거나 CC3120을 통한 MCU 개발을 가능하게 하는위한 PC 툴인 SimpleLink Studio와 함께 사용할 수 있습니다. 또한 SDK를 (...)

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

ARM-CGT — Arm® 코드 생성 툴 – 컴파일러

The TI Arm® compiler tools are an essential component of the CCStudio™ development ecosystem, providing robust support for TI Arm-based platforms. They are engineered to maximize the potential of TI Arm Cortex®-M and Cortex-R series devices.

The current tools ARM-CGT-CLANG are derived from the (...)

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

MSPKEIL — ARM® Keil® MDK

MDK Microcontroller Development Kit

ARM® Keil® MDK is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications. Keil MDK supports SimpleLink™ MSP432™ microcontrollers, and includes a fully integrated debugger for source and disassembly level (...)

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

지원되는 제품 및 하드웨어
IDE, 구성, 컴파일러 또는 디버거

ULPADVISOR — ULP(초저전력) Advisor

ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)

지원되는 제품 및 하드웨어
온라인 교육

SIMPLELINK-ACADEMY-MSP432E4 — SimpleLink™ Academy for MSP432E4

SimpleLink Academy for MSP432E4 delivers easy-to-use training modules that span a wide range of topics for all LaunchPads in the MSP432E family of microcontrollers
지원되는 제품 및 하드웨어
플러그 인

SIMPLELINK-SDK-BLUETOOTH-PLUGIN — Bluetooth Plug-in for SimpleLink™ MCU SDK

SimpleLink™ SDK 블루투스 플러그 인은 호스트 SimpleLink 플랫폼에서 블루투스 네트워크 프로세서(NWP)를 사용할 수 있도록 하는 컴패니언 소프트웨어 패키지입니다. 이 소프트웨어 패키지는 호스트 플랫폼으로 MSP432P4, MSP432E4CC32xx 장치를, Bluetooth 저에너지 네트워크 프로세서로 CC2650MODA, CC2640CC26x2R1을 지원합니다. 이 2칩 솔루션은 지원되는 네트워크 프로세서와 함께 지원되는 호스트 플랫폼을 사용함으로써 GAP 주변 기기 역할 또는 GAP Central (...)

지원되는 제품 및 하드웨어
플러그 인

SIMPLELINK-SDK-LVGL-PLUGIN — SimpleLink™ SDK LittlevGL plug-in

SimpleLink™ SDK LVGL 플러그 인은 무료 및 오픈 소스 타사 라이브러리인 LittlevGL을 SimpleLink SDK 에코시스템에 통합하여 다양한 SimpleLink™ MCU 플랫폼에서 고급 그래픽 기능을 사용할 수 있도록 지원하는 컴패니언 소프트웨어 패키지입니다. 이 플러그 인은 개발자가 레퍼런스 하드웨어에서 SimpleLink 플랫폼에 임베디드 GUI를 쉽게 빌드할 수 있도록 예제 하드웨어 추상화 계층과 디스플레이 드라이버를 제공합니다. 이 플러그 인은 SimpleLink MSP432P4 SDK (...)

지원되는 제품 및 하드웨어
플러그 인

SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in

The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)

지원되는 제품 및 하드웨어
소프트웨어 프로그래밍 도구

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.

UniFlash는 CCStudio 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.

macOS는 mmWave, AMx, K2G 및 (...)

지원되는 제품 및 하드웨어
시뮬레이션 모델

MSP432E411Y 212-NFBGA (ZAD) BSDL Model

SLAM322.ZIP (6 KB) - BSDL 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

MSP432E411Y 212-NFBGA (ZAD) IBIS Model

SLAM323.ZIP (738 KB) - IBIS 모델
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
NFBGA (ZAD) 212 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

비디오 시리즈

모든 비디오 보기

동영상