AM62L
Processor Cores:
- Dual 64-bit Arm
Cortex-A53 microprocessor subsystem up to 1.25GHz
- Dual-core Cortex-A53 with 256KB L2 Cache
- Each A53 core has 32KB L1 DCache and 32KB L1 ICache
Memory Subsystem:
- 160KB of Shared On-Chip SRAM (OCSRAM)
- DDR Subsystem (DDRSS)
- Supports LPDDR4, DDR4 memory types
- 16-bit data bus
- Supports speeds up to 1600MT/s
- Max DDR4 addressing range of 4GB
- Max LPDDR4 addressing range of 2GB
Multimedia:
- Display Subsystem
- Single display support
- Up to 1920x1080 @ 60fps
- Supported with independent PLL
- MIPI DSI (4 lanes DPHY) or DPI (24-bit RGB LVCMOS)
Security:
- Secure boot supported
- Hardware-enforced Root-of-Trust (RoT)
- Support to switch RoT via backup key
- Support for takeover protection, IP protection, and anti-roll back protection
- Trusted Execution Environment (TEE)
supported
- Arm TrustZone based TEE
- Extensive firewall support for isolation
- Secure watchdog/timer/IPC
- Secure storage support
- Replay Protected Memory Block (RPMB) support
- Dedicated Security Controller and dedicated security DMA & IPC subsystem for isolated processing
- Cryptographic acceleration supported
- Session-aware cryptographic engine with ability to auto-switch key-material based on incoming data stream
- Supports cryptographic cores
- AES – 128-/192-/256-bit key sizes
- SHA2 – 224-/256-/384-/512-bit key sizes
- DRBG with true random number generator
- PKA (Public Key Accelerator) to Assist in RSA/ECC processing for secure boot
- Debugging security
- Secure software controlled debug access
- Security aware debugging
High Speed Interfaces:
- Integrated Ethernet switch supporting (total 2
external ports)
- RMII(10/100) or RGMII (10/100/1000)
- IEEE1588 (Annex D, Annex E, Annex F with 802.1AS PTP)
- Clause 45 MDIO PHY management
- Priority based flow control
- Packet Classifier based on ALE engine with 64 classifiers
- Time sensitive networking (TSN) support
- H/W interrupt Pacing
- IP/UDP/TCP checksum offload in hardware
- 2× USB
2.0 Dual-Role Device (DRD) Subsystems (USBSS)
- Port configurable as USB host or USB device
- USB device: High-speed (480Mbps), and Full-speed (12Mbps)
- USB host: High-speed (480Mbps), Full-speed (12Mbps), and Low-speed (1.5Mbps)
- xHCI 1.1 compatible
General Connectivity:
- 8x
Universal Asynchronous Receiver-Transmitters (UARTs)
- All instances Support RTS and CTS Flow Control
- Supports RS-485 external transceiver auto flow control
- 4x Serial Peripheral Interface (SPI) controllers
- 5x Inter-Integrated Circuit (I2C) ports
- 3x
Multichannel Audio Serial Ports (McASPs)
- Transmit and Receive clocks up to 50MHz
- Up to 4/6/16 Serial Data Pins across 3x McASPs with Independent TX and RX Clocks
- Supports Time Division Multiplexing (TDM), Inter-IC Sound (I2S), and similar formats
- Supports Digital Audio Interface Transmission (SPDIF, IEC60958-1, and AES-3 formats)
- FIFO buffers for Transmit and Receive (256Bytes)
- Support for audio reference output clock
- 3x enhanced PWM modules (ePWM)
- 3x enhanced Quadrature Encoder Pulse modules (eQEP)
- 3x enhanced Capture modules (eCAP)
- General-Purpose I/O (GPIO), most LVCMOS I/O can be
configured as
GPIO
- 4 banks supported for dual-voltage (1.8V/3.3V) and the rest single-voltage (1.8V) LVCMOS I/O banks
- 3x
Controller Area Network (CAN) with optional CAN-FD support
- Conforms with CAN Protocol 2.0 A, B, and ISO 11898-1
- Full CAN-FD support (up to 64 data bytes)
- Speed up to 8Mbps
- 1x 12-bit Analog-to-Digital Converter
(ADC)
- 10 bits of effective resolution (ENOB ≅ 10)
- Up to 2MSPS
- 4x analog inputs (time-multiplexed)
Media and Data Storage:
- 3x Multi-Media Card/Secure Digital (MMC/SD) interface
- 1x 8-bit eMMC interface up to HS200 speed
- 2x 4-bit SD/SDIO interface up to UHS-I
- Compliant with eMMC 5.1, SD 3.01, and SDIO Version 3.0
- 1× General-Purpose Memory Controller
(GPMC) up to 133MHz
- Flexible 8- and 16-Bit Synchronous or Asynchronous Memory Interfaces with up to four Chip Selects
- Supports 16-bit Muxed Address/Data schemes (AD, AAD)
- Uses BCH code to support 4-, 8-, or 16-bit ECC
- Uses Hamming code to support 1-bit ECC
- Error Locator Module (ELM)
- OSPI/QSPI with DDR / SDR support
- Support for Serial NAND and Serial NOR Flash devices
- 4GBytes memory address support
Power Management:
- Active power management features such as auto clock gating, power gating, and dynamic frequency scaling
- Several low-power features supported
- Low-Power Modes
- RTC Only
- RTC + IO + DDR
- DeepSleep
- Standby
Boot Options:
- UART
- OSPI/QSPI Flash
- GPMC NAND Flash
- SD Card
- eMMC
- USB (host) Mass storage
- USB (device) boot from external host (DFU mode)
Technology / Package:
- 16-nm Technology
- 11.9mm × 11.9mm, 0.5mm VCA, 373-pin FCCSP BGA package (ANB)
The low-cost & performance optimized AM62L family of application processors are built for Linux application development. With scalable Arm Cortex-A53 core performance and embedded features such as: Multimedia DSI/DPI support, integrated ADC on chip, advanced lower power management modes, and extensive security options for IP protection with the built-in security features.
The AM62Lx devices includes an extensive set of peripherals that make it a well-suited general-purpose device for a broad range of industrial applications while offering intelligent features and optimized power architecture as well. In addition, the extensive set of peripherals included in AM62Lx enables system-level connectivity, such as: USB, MMC/SD, OSPI, CAN-FD and an ADC.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TMDS62LEVM — AM62L 평가 모듈
BEACN-3P-AM62L-SOM — Beacon EmbeddedWorks AM62L SoM(시스템 온 모듈) 평가 및 개발 키트
Beacon EmbeddedWorks AM62L SoM(시스템 온 모듈)평가 키트 및 개발 키트는 AM62L SoM의 기능을 평가하기 위한 제품 출시 수준의 하드웨어 및 소프트웨어 플랫폼을 제공합니다. 이러한 포괄적인 평가 및 개발 키트에는 제품 개발을 시작하는 데 필요한 완전 통합형 Beacon AM62L SoM, 캐리어 보드, 케이블 및 모든 필수 소프트웨어와 BSP가 포함되어 있습니다.
EZURI-3P-CARBONAM62L — CarbonAM62L OSM-SF: AM62L, TPS652194 PMIC, Sona™ TI351 Wi-Fi 6, Bluetooth, LPDDR4 RAM, eMMC 스토리지
CarbonAM62L OSM-SF 제품군은 TI의 AM62L 프로세서 제품군, TPS652194 PMIC, Ezurio의 Sona™ TI351 Wi-Fi 6, Bluetooth 무선 모듈, LPDDR4 RAM, eMMC 스토리지에서 구동됩니다.
확장 가능한 성능을 위해 설계된 CarbonAM62L은 듀얼 코어 Cortex-A53 서브시스템과 풍부한 디스플레이 지원, USB 및 기가비트 이더넷을 포함한 고속 연결 옵션을 결합합니다. 옵션인 Sona 무선 모듈은 요구 사항에 맞는 Wi-Fi 및 Bluetooth 유연성을 제공하며, (...)
FORLX-3P-AM62L-EVM — Forlinx AM62L 평가 모듈
Forlinx Embedded Technology와 Texas Instruments가 공동 개발한 AM62L 평가 모듈은 AI 기반 엣지, 비전 및 산업용 애플리케이션 개발자를 위해 상용 수준의 비용 최적화된 플랫폼을 제공합니다.
Forlinx의 4레이어 PCB 기술과 TI의 엄격한 신호 무결성 기준을 활용한 AM62L EVM은 고성능의 경제적인 진입점을 제공하여 프로토타입 개발을 가속화하고 출시 기간을 단축하는 동시에 산업용 신뢰성 및 안전 요구사항을 충족합니다.
IWAVE-3P-OSM-LF-AM62LX — iWave Global TI AM62Lx OSM Size-S System on Module
iWave’s iG-RainboW-G69M OSM Size-SF System on Module integrates the TI AM62Lx SoC featuring dual 64-bit Arm® Cortex®-A53 cores running up to 1.25GHz. Built on the OSM v1.2 standard with a compact 30mm x 30mm LGA form factor, it supports 1GB LPDDR4 (expandable to 2GB), 8GB eMMC (expandable), and (...)
AM62L-EVSE-DEV-EVM — AM62L EVSE 평가 모듈
AM62L-EVSE-DEV-EVM은 AM62L을 위한 TI-EVSE 개발 플랫폼의 일부로, 오픈 소스 소프트웨어 스택을 갖춘 AC 및 DC 충전 스테이션용 범용 충전 컨트롤러를 구현합니다. 전체 플랫폼은 AM62L EVM(TMDS62LEVM), AM62L- EVSE-DEV-EVM, TIDA-010239(선택 사항)등 총 세 부분으로 구성됩니다.
TMDS62LEVM은 메인 CPU 역할을 하며, 통신을 위한 이더넷 및 무선 연결을 지원합니다. AM62L-EVSE-DEV-EVM은 프론트 엔드 컨트롤러 역할을 하고, EV와의 아날로그 (...)
BEAGLE-BADGE — AM62L 기반 BeagleBoard.org Foundation BeagleBadge 단일 보드 컴퓨터
BeagleBadge brings a new vision to wearables by combining powerful built-in sensing with unmatched expansion flexibility. With an onboard light sensor, accelerometer/gyroscope for precise position and orientation feedback, and integrated temperature and humidity monitoring, it empowers users to (...)
PHYTC-3P-PHYFLEX-AM62L — PHYTEC phyFLEX-AM62Lx SOM(시스템 온 모듈)
phyFLEX-AM62Lx는 PHYTEC에서 설계하고 Arm® Cortex®-A53 AM62Lx 프로세서를 기반으로 하는 소형, 저전력 SOM(시스템 온 모듈)입니다. 이 SOM은 DDR4 메모리, eMMC, 이더넷 PHY 및 MIPI-LVDS 컨버터를 통합하여 시스템 설계를 간소화하고 외부 부품 요구 사항을 줄이는 데 도움을 줍니다.
PHYTEC의 FPSC(미래 지향 솔더 코어) 풋프린트를 기반으로 구축된 SOM은 캐리어 보드 재작업 없이 미래 프로세서 세대에서도 확장 가능한 버전과 장기적인 제품 유연성을 지원합니다. 이 (...)
TMDSEMU200-U — XDS200 USB 디버그 프로브
XDS200은 TI 임베디드 장치를 디버깅하는 데 사용되는 디버그 프로브(에뮬레이터)입니다. 대부분의 장치의 경우 더욱 저렴한 신형 XDS110(www.ti.com/tool/TMDSEMU110-U)을 사용하실 것을 권장합니다. XDS200은 단일 포드에서 다양한 표준(IEEE1149.1, IEEE1149.7, SWD)을 지원합니다. 모든 XDS 디버그 프로브는 ETB(임베디드 트레이스 버퍼)가 포함되어 있는 모든 Arm® 및 DSP 프로세서에서 코어 및 시스템 트레이스를 지원합니다.
XDS200은 TI 20핀 커넥터(TI 14핀, (...)
LB-3P-TRACE32-ARM — Arm® 기반 마이크로컨트롤러 및 프로세서용 Lauterbach TRACE32® 디버그 및 트레이스 시스템
Lauterbach의 TRACE32® 툴은 개발자가 모든 종류의 Arm® 기반 마이크로컨트롤러 및 프로세서를 분석, 최적화 및 인증할 수 있도록 하는 첨단 하드웨어 및 소프트웨어 구성 요소 제품군입니다. 세계적으로 유명한 임베디드 시스템 및 SoC용 디버그 및 트레이스 솔루션은 초기 사전 실리콘 개발부터 현장의 제품 인증 및 문제 해결에 이르기까지 모든 개발 단계를 위한 완벽한 솔루션입니다. Lauterbach 툴의 직관적인 모듈형 설계는 엔지니어에게 현존하는 최고의 성능을 제공하고 요구 사항 변화에 따라 적응하고 성장하는 (...)
AM62L-FREERTOS-SDK — FreeRTOS SDK for AM62L family of devices
AM62L 프로세서 Linux® 및 TI FreeRTOS SDK(소프트웨어 개발 키트)는 임베디드 프로세서를 위한 통합 소프트웨어 플랫폼으로, 간편한 설정과 벤치마크 및 데모에 즉시 액세스할 수 있도록 해줍니다.
이 SDK의 모든 릴리스는 제공되는 TI의 광범위한 포트폴리오에서 일관되므로 개발자는 제품 간에 소프트웨어를 원활하게 재사용하고 개발할 수 있습니다.
AM62L-LINUX-RT-SDK — Linux RT SDK for AM62L family of devices
AM62L 프로세서 Linux® 및 TI FreeRTOS SDK(소프트웨어 개발 키트)는 임베디드 프로세서를 위한 통합 소프트웨어 플랫폼으로, 간편한 설정과 벤치마크 및 데모에 즉시 액세스할 수 있도록 해줍니다.
이 SDK의 모든 릴리스는 제공되는 TI의 광범위한 포트폴리오에서 일관되므로 개발자는 제품 간에 소프트웨어를 원활하게 재사용하고 개발할 수 있습니다.
AM62L-LINUX-SDK — Linux SDK for AM62L family of devices
AM62L 프로세서 Linux® 및 TI FreeRTOS SDK(소프트웨어 개발 키트)는 임베디드 프로세서를 위한 통합 소프트웨어 플랫폼으로, 간편한 설정과 벤치마크 및 데모에 즉시 액세스할 수 있도록 해줍니다.
이 SDK의 모든 릴리스는 제공되는 TI의 광범위한 포트폴리오에서 일관되므로 개발자는 제품 간에 소프트웨어를 원활하게 재사용하고 개발할 수 있습니다.
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
CLOCKTREE-AM62L — Clock tree configuration for AM62L
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
DDR-CONFIG-AM62L — DDR Configuration Tool
PRU-CQKIT — TI PRU safety compiler qualification kit (leverages compiler release validations)
안전 컴파일러 검증 키트는 IEC 61508 및 ISO 26262 등 기능 안전 표준에 대한 TI ARM, C6000, C7000 또는 C2000/CLA C/C++ 컴파일러 사용 검증 시 고객을 지원하기 위해 개발되었습니다.
안전 컴파일러 검증 키트:
- TI 고객에게 무료로 제공됩니다
- 사용자가 검증 테스트를 실행할 필요가 없음
- 컴파일러 범위 분석 지원*
- * 범위 데이터 수집에 대한 지침은 각 QKIT 다운로드 페이지에서 다운로드할 수 있습니다.
- Validas 컨설팅은 포함되지 않음
안전 컴파일러 검증 키트에 액세스하려면 위의 요청 버튼 (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
AM62L-ACADEMY — AM62Lx 아카데미
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
TRZN-3P-TORIZON-OS — Torizon OS 즉시 사용 가능한 산업용 임베디드 Linux 배포판
Torizon OS는 높은 신뢰성과 보안을 요구하는 제품의 개발과 유지 관리를 단순화하는 데 중점을 둔 무료 오픈 소스 산업용 임베디드 Linux OS입니다. 이 OS는 핵심 서비스와 함께 최적화된 컨테이너 런타임과 안전한 오프라인 및 원격 OTA(오버 디 에어) 업데이트, 장치 모니터링, 원격 액세스를 위한 구성 요소를 제공합니다. Torizon OS는 간단한 커스터마이징만으로도 하드웨어에서 즉시 사용할 수 있으며, 기본적으로 보안이 적용되어 있고 자주 제공되는 업데이트와 쉽게 접근할 수 있는 간단한 보안 기능을 갖추고 (...)
WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 사전 인증 안전 RTOS
SAFERTOS®는 임베디드 프로세서를 위해 설계된 고유한 실시간 운영 체제입니다. TÜV SÜD의 IEC 61508 SIL3 및 ISO 26262 ASILD 표준에 따라 사전 인증을 받았습니다. SAFERTOS®는 WHIS 전문가 팀에서 안전을 위해 특별히 제작되었으며, 전 세계적으로 안전이 중요한 응용 분야에 사용됩니다. WHIS와 텍사스 인스트루먼트는 10년 넘게 협력해 왔습니다. 이 기간 동안, WHIS는 SAFERTOS®를 광범위한 TI 프로세서로 이식하여 널리 사용되는 모든 코어를 지원하며 요청 시 추가 아키텍처를 (...)
AM62L-PET-CALC — AM62L PET(전력 예측 툴)
TIDA-010939 — 전기 자동차 전원 공급 장비 프론트 엔드 컨트롤러 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCCSP (ANB) | 373 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.